Photoinitiator. Used in adhesives... view more

2,2-dimethoxy-2-phenylacetophenone. Used in adhesives. Offers good shelf stability, a fast cure rate and thorough curing... view more

Methyl-o-benzoylbenzoate. Used in adhesives... view more

2,4,6-trimethyldiphenylphosphineoxide. Used in adhesives. Offers the advantage of good shelf stability, fast and thorough cure... view more

Corona™ 9 by Croda is skin-friendly, water in oil emulsion stabilizer that reduced tackiness. It is a scratch-resistant and anti-blocking additive. It prevents scarring on the surface, especially at... view more

ECO Brij™ C10 by Croda is a 100% bio-based, non-ionic, surfactant. It is produced from naturally occurring straight chain cetyl alcohol. It is also used as a versatile co-emulsifier for O/W... view more

ECO Brij™ C2 by Croda is a 100% bio-based, non-ionic, surfactant. It is also used as a versatile co-emulsifier for O/W emulsions wetting agent, dispersing agent and solubilizer. This hydrolytically... view more

ECO Brij™ CS20 by Croda is a 100% bio-based, high HLB, non-ionic surfactant. It is also used as a versatile emulsifier for O/W emulsions and aqueous wetting & dispersing agent. This hydrolytically... view more

ECO Brij™ S20 by Croda is a 100% bio-based, high HLB, non-ionic surfactant. This hydrolytically stable grade is produced from naturally occurring straight chain stearyl alcohol. It is used as a... view more

Finntalc M15 by Elementis is floated, medium sized, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M30 by Elementis is floated, coarse, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M40 by Elementis is floated, coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. It is recommended for adhesives and polyester putties... view more

Finntalc M50 by Elementis is floated, very coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. Finntalc M50 is recommended for adhesives and polyester putties... view more

Finntalc M65 by Elementis is talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

AEROSIL® 255 by Evonik is hydrophilic fumed silica. It exhibits rheology and thixotropy control of liquid systems, binders, polymers etc. It provides improvement of free flow and anti-caking... view more

Flytac 102 -100 by Guangzhou Flying Dragon is a pentaerythritol rosin ester. It acts as a tackifier. Possesses the properties of high viscosity, low VOC, excellent heat, aging stability, excellent polymer... view more

Flytac 102 -100F by Guangzhou Flying Dragon is pentaerythritol rosin ester. Acts as a tackifier. Possesses the properties of high viscosity, low VOC, excellent heat, aging stability, excellent polymer compatibility... view more

Flytac 103 -90 by Guangzhou Flying Dragon is glycerol rosin ester. Acts as a tackifier. Possesses high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Used in EVA, SBS... view more

Flytac 103 -E by Guangzhou Flying Dragon is glycerol rosin ester. Acts as a tackifier. Possesses high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Used in EVA, SBS... view more

Synthetic polymer in a 100% solid form. When in solution, designed to be a release agent for adhesive tapes... view more