K-FLEX® PG by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, low-VOC, propylene glycol dibenzoate plasticizer. It can achieve excellent performance and compatibility in waterborne... view more

Polyvinyl chloride. It acts as a plasticizer. Exhibits compatibility with polyvinyl acetate emulsions and acrylics. Provides excellent wet tack, set time and open time. Offers good adhesion- and... view more

Alcogum® 296-W by Nouryon is a high viscosity, anionic, aqueous solution of sodium polyacrylate. It acts as rheology modifier, stabilizer and surface active agent. It possesses adhesive, suspending... view more

Phenol-modified indene-coumarone-resin. Used as a tackifier in water and solvent based adhesives. Increases initial tack, peel and shear strength. Inhibits the tendency of natural resins to... view more

Phenol-modified indene-coumarone-resin. Used as a tackifier in water and solvent based adhesives. Increases initial tack, peel and shear strength. Inhibits the tendency of natural resins to... view more

Phenol-modified indene-coumarone-resin. Used as a tackifier in water and solvent based adhesives. Increases initial tack, peel and shear strength. Inhibits the tendency of natural resins to... view more

Pentalyn™ H-E is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. Possesses very good resistance to... view more

Tacolyn™ 3570 by Synthomer is an anionic, APE-free, aqueous, solvent-free, dispersion of a stabilized rosin ester. It is designed for use in pressure sensitive adhesives based on acrylic polymer... view more

Bis (2-ethylhexyl) succinate. Acts as a plasticizer and coalescing agent. It is a high solvating, fast fusing, phthalate-free and ‘green’ plasticizer. Exhibits low viscosity. Used in caulks... view more

ACTICIDE® C 98 by Thor is an industrial microbicide, algicide and fungicide. It controls the growth of bacteria and fungi. It can be used with either unmodified or alkyd modified acrylic, vinyl... view more

ACTICIDE® DT by Thor is an industrial microbiocide. It controls the growth of bacteria and fungi. It offers wet state and dry film fungicidal preservation. It is based on a concentrated glycol... view more

ACTICIDE® IMS by Thor is a mixture of 3-iodo-2-propynyl butylcarbamate (2.50%) and 2–methyl–4–isothiazolin–3–one (5%). Acts as a microbiocide. It controls the growth of bacteria and fungi in wet... view more

Anionic roisn ester. Acts as a tackifier. It enhances adhesion, has good mechanical stability, good water resistance and promotes aggressive tack. It is compatible with the following latexes:... view more

V-TAC™ 9001 by Valpac is a anionic rosin ester. It enhances adhesion, has good mechanical stability, excellent water resistance, good heat resistance and promotes aggressive tack. It is compatible... view more

Santicizer® 160 by Valtris Specialty Chemicals is a high solvating, fast fusing, non-halogenated benzyl phthalate plasticizer. It exhibits excellent permanence properties, reduced smoke emissions and has compatibility... view more

Dipropylene glycol dibenzoate. Acts as a non-phthalate plasticizer. Exhibits UV-, oil-, solvent- and stain- resistance. Provides low temperature flexibility, processibility, wet tack and adhesion... view more