Eastman VersaBond™ Plasticizer is a phthalate-free blend of esters (100% concentration) by Eastman. Exhibits better shore hardness, viscosity, tensile strength and water uptake as compared to... view more

KANEKA SILYL™ SAX220 by Kaneka is a silyl-terminated polyether (STPE) used as a base resin for producing high-performance moisture cure adhesives and sealants utilizing either a hot or cold process... view more

Cardolite® NX-5607 is phenalkamine epoxy curing agent that has favorable labeling, faster cure at low temperature, i.e. 0°C. Utilized as a solvent free hardener for epoxy adhesives and as a... view more

Cardolite® NX-5608 is a phenalkamine epoxy curing agent that has favorable labeling, faster cure at low temperature, i.e. 0°C. Utilized as a solvent free hardener for epoxy adhesives and as a... view more

Ancamine® 3456 by Evonik is a formulated aliphatic polyamine adduct designed for use with liquid epoxy resin at ambient temperature. It acts as a curing agent. It offers rapid and highly flexible... view more

ANCAMINE® K54 by Evonik is a tertiary amine. Designed for sealant and concrete adhesives applications. Suitable for solder, sealant, and concrete adhesives applications. It is an activator for other... view more

Ancamide® 1110 by Evonik is dimethylaminomethylphenol as a curing agent. It offers low viscosity. Ancamide® 1110 is used as a cure catalyst in adhesives... view more

Ancamide® 2396 by Evonik is a modified amidoamine intended for use at ambient temperature with liquid epoxy resins. It acts as a curing agent. It possesses very good chemical resistance and very... view more

Ancamide® 3202 by Evonik is a low viscosity polyaminoamide adduct supplied at 90% solids in ethanol. It acts as a curing agent. it offers good cure under high humidity. Ancamide® 3202 is used for... view more

Escorene™ Ultra UL 00218CC3 by ExxonMobil Chemical is a copolymer of ethylene and vinyl acetate. It contains thermal stabilizer as an additive. Escorene™ Ultra UL 00218CC3 is used in hot melt... view more

Escorene™ Ultra UL 00226CC by ExxonMobil Chemical is a copolymer of ethylene and vinyl acetate. It contains thermal stabilizer as an additive. Escorene™ Ultra UL 00226CC is used in hot melt... view more

Escorene™ Ultra UL 00328 by ExxonMobil Chemical is a copolymer of ethylene and vinyl acetate. It does not contain any additive. Escorene™ Ultra UL 00328 is used in hot melt adhesives, wire and... view more

K-FLEX® 500 by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, general-purpose, polar plasticizer. It is a blend of di-propylene glycol dibenzoate and diethylene glycol dibenzoate... view more

K-FLEX® 850P by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, plasticizer. It is a blend of dipropylene glycol- and diethylene glycol dibenzoate. It is similar in composition to... view more