Dynasylan® 1124 by Evonik acts as an adhesion promoter and surface modifier with excellent crosslinking properties. It is a secondary aminofunctional methoxy-silane possessing two symmetric silicon... view more

Dynasylan® 1189 by Evonik is a bifunctional silane. Acts as an adhesion promoter or as a surface modifier. Provides flexural strength, tensile strength, impact strength, modulus of elasticity... view more

D-10 by HUBEI BLUESKY NEW MATERIALS is a methyltriacetoxysilane-based crosslinking agent. It readily hydrolyzes upon contact with moisture. It can be used alone or in combination with other... view more

D-1011 by HUBEI BLUESKY NEW MATERIALS is a blend of methyltriacetoxysilane and dibutoxydiacetoxysilane (70:30). It acts as a crosslinking agent. It readily hydrolyzes upon contact with moisture. It... view more

D-12 by HUBEI BLUESKY NEW MATERIALS is a modified methyltriacetoxysilane based-crosslinking agent. It can be used alone or in combination with other acetoxysilane to provide sealant with desired... view more

D-13 is a modified methyltriacetoxysilane based-crosslinking agent by HUBEI BLUESKY NEW MATERIALS. It can be used alone or in combination with other acetoxysilane to provide sealant with desired... view more

D-15 is an ethyltriacetoxysilane based-crosslinking agent by HUBEI BLUESKY NEW MATERIALS. It can be used alone or in combination with other acetoxysilane to provide sealant with desired cure rate... view more

Dolmix range by Imerys is a dolomite. It offers cost-effectiveness, high whiteness, hardness and acid resistance. It is used in PVA/starch/dextrin adhesives for packaging, hot-melt adhesives for... view more

Dolplast range by Imerys is a cost-effective dolomite. It provides high whiteness, hardness and acid resistance. It is used in PVA/starch/dextrin adhesives for packaging, hot-melt adhesives for... view more

Hexafil™ by Imerys is cost-effective kaolin. This fine clay provides good barrier effects, rheology control and improved adhesion. It is compatible with silicone rubber, SBR and EDPM. Hexafil™ is... view more

Queensfil™ 240 by Imerys is a fine ground calcium carbonate. It is used as a general purpose extender for chalk whiting. It increases rheological properties and reduces water or volatile content. It... view more

Queensfil™ 25 by Imerys is a cost-effective, fine ground calcium carbonate. It offers increased rheological properties and reduced water or volatile content. It is designed for silicone & hybrid... view more

AMICAL™ Flowable by LANXESS is a preservative based on the active ingredient diidomethyl-ptolylsulfone. It is used in ceramic tile adhesives, wall coverings, adhesive emulsions, acrylic, polyvinyl... view more

AMICAL™ WP by LANXESS is a preservative based on the active ingredient diidomethyl-ptolylsulfone. It is used in ceramic tile adhesives, wall coverings, adhesive emulsions, acrylic, polyvinyl acrylic... view more

Hydrcocarb 95 T - OG by Omya is an ultrafine, coated natural calcium carbonate. It is recommended for use in moisture reactive adhesives such as parquet adhesives. This performance filler shows... view more

Omyabond 520-FL by Omya is a fine, white calcium carbonate (GCC). It is designed for moisture reactive adhesives and sealants (such as PU, SMP or Silicone) in any environment. A very special... view more

Omyacarb 1 T by Omya is a very fine, coated natural calcium carbonate (GCC) for reactive adhesives and sealants systems such as SMP systems. In comparison to Omyacarb 2 T or Omyacarb 5 T, it... view more

Omyacarb 2 T by Omya is a very fine, coated natural calcium carbonate (GCC). It is suitable for use in reactive adhesives and sealants systems such as SMP or silicone. It provides easy... view more

Omyalite 95 T - OM is an ultrafine, coated natural calcium carbonate by Omya. It is recommended for use in moisture reactive adhesives such as parquet adhesives. This performance filler shows... view more