iso-Decyl Methacrylate (IDMA) by BASF is a hydrophobic, low viscosity, monofunctional, flexibilising and plasticizing monomer. Forms homopolymers and copolymers which can be prepared with acrylic... view more

iso-Tridecyl Methacrylate (C13MA) by BASF is an acrylate monomer. Its copolymers can be prepared with acrylic acid and its salts, amides and esters, and with methacrylate, acrylonitrile, maleic acid... view more

n-Butyl vinyl ether by BASF is a monomer for polymerization, cross-linking and reactive diluents for UV curing. With high reactivity, exceptional quality and good consistency, it is the best choice... view more

tert-Butyl Acrylate (TBA) by BASF is acrylic acid ester for manufacturing polymers and for use as a feed stock for syntheses. It imparts hydrophobicity, chemical stability, hardness, scratch... view more

tert-Butyl Methacrylate (TBMA) by BASF is methacrylic acid ester. It forms homopolymers and copolymers which can be prepared with acrylic acid and its salts, amides and esters, acrylonitrile, maleic... view more

Dicyclopentadiene by Braskem is a monomer obtained through the C5 stream. It is used as a raw material in the production of various resins, such as polyesters and hydrocarbon resins in adhesive... view more

Priamine™ 1071 by Cargill is a bio-based, dimer diamine building block. Offers excellent flexibility and chemical resistance in epoxy formulations. It can be used as a curing agent, co-hardener and... view more

Priplast™ 1900 by Cargill is an amorphous polyester polyol. Exhibits improved moisture barrier protection, chemical resistance and hydrolytic stability in application areas where PTMEG and adipate... view more

Pripol™ 1006 F by Cargill is a bio-based, high purity hydrogenated building block for epoxy, polyurethane, polyester and polyamide. It contains 100% renewable carbon content. This dimer acid provides... view more

Pripol™ 1009 F by Cargill is a bio-based, high purity, distilled and hydrogenated dimer acid. It contains 100% renewable carbon content. It offers water repellency, flexibility, thermo-oxidative... view more

Pripol™ 1010 F by Cargill is a high purity, distilled and hydrogenated dimer acid. It provides good color, hydrophobicity, flexibility, thermo-oxidative stability, excellent hydrolysis/chemical... view more

Pristerene™ 4963 by Croda is a non-polar, stearic acid. It shows compatibility with non-polar solvents and resins. This monomer also provides low foaming, absence of surface defects and ease of... view more

Butyl Acrylate, 15 ppm MEHQ by Dow is used for copolymer-based adhesives. Offers flexibility, weatherability, internal plasticization, adhesion, range of hardness and resistance to abrasion as well as oil or... view more

Methyl Methacrylate, 15 ppm AO-30 by Dow offers hardness and flexibility. It also exhibits clarity, color compatibility, toughness, internal plasticization and weatherability. Methyl Methacrylate... view more

PARALOID™ AU-1033 by Dow is acrylic polyol in PA acetate/ethylbenzene/VM+P naphtha in the ratio of 55/25/20. It is used to crosslink with isocyanates at ambient temperatures. PARALOID™ AU-1033... view more

PARALOID™ AU-1166 by Dow is an acrylic polyol in n-butyl acetate. PARALOID™ AU-1166 provides high solids, low-VOC, good alkali and acid resistance... view more