Actmix® ADC-75P is an azodicarbonamide. It is a nitrogenous organic foaming agent. It has a relatively high foaming temperature (200-210?), which can be effectively reduced by addition of small... view more

Curekind® ETU(NA-22) Dust free Powder is ethylene thiourea. Acts as an accelerator. It is compatible with NBR-CH & NBR-W and chlorohydrin rubber, polyacrylate rubber products. It is regulated for... view more

Curekind® ETU(NA-22) Powder by Ningbo Actmix Rubber Chemicals is ethylene thiourea. Acts as an accelerator. It is compatible with NBR-CH & NBR-W and chlorohydrin rubber, polyacrylate rubber products. It is regulated for use in articles... view more

Curekind® NDBC(NBC) Dust free Powder by Ningbo Actmix Rubber Chemicals is a nickel dibutyl dithiocarbamate-based antioxidant. It avoids the rubber crack under the sunshine and ozone, improves the heat-resistant of CR and chloro-sulfonated... view more

Curekind® NDBC(NBC) Powder is a nickel dibutyl dithiocarbamate. Acts as an antioxidant. It avoids the rubber crack under the sunshine and ozone, improves the heat-resistant of CR and... view more

Zinc oxide. Used as an accelerator activator for transparent rubber goods and also as an acid acceptor in polychloroprene adhesives where transparency is required. Permits to achieve long open-tack... view more

Thermoplastic terpene-phenolic resin primary used for the enhancement of tack in aqueous systems and in contact adhesives. Compatible with high pH polychloroprene latices. Can be blended with other... view more

Aqueous dispersion primarily used for enhancing tack in aqueous adhesive systems. Developed for use with carboxylated polychloroprene latices. (Can be blended with latices which are neutral without... view more

Non-ionic aqueous alkylphenolic resin primarily used in solvent borne contact adhesives. Formulated for use with carboxylated polychloroprene latices. Can also be used with carboxylated nitrile... view more

Petro-Rez® PTA-C by Akrochem is a low melt point, aromatic hydrocarbon resin, used as a tackifier/softener for nitrile-, chloroprene-, chlorosulfonated polyethylene-, SBR, butyl- and many other... view more

AQUARES T95P DISPERSION by Aquaspersions is an emulsion of a terpene-phenolic resin. It is miscible in water and exhibits negligible evaporation rate. AQUARES T95P DISPERSION is recommended for acrylic PSA, SBR and... view more

Alkylphenolic resin. Used as a tackifier in CR adhesive. Offers tackiness retention time. Possesses good phasing stability, heat resistance and adhesion strength... view more

Alkylphenolic resin. Used as a tackifier in CR adhesives. Offers long tackiness retention... view more

Alkylphenolic resin. Used as a tackifier in CR adhesive. Offers tackiness retention time. Possesses good phasing stability, heat resistance and adhesion strength... view more

Tamanol 586 by Arakawa Chemical is alkylphenolic resin. Used as a tackifier in CR adhesives. Offers good heat resistance and stability... view more

Thermoplastic rosin phenolic resin. Used for polychloroprene adhesive and hot melt adhesives. Provides very good heat stability. Increases the heat creep... view more