The material selection platform
Adhesives Ingredients
OK
The material selection platform
Adhesives Ingredients
Welcome back
,
My Profile
My Subscriptions
My Courses & Tutorials
Logout
Subscribe to Newsletters
Login / Register
The material selection platform
Adhesives Ingredients
Ingredients Selector
Selection Resources
News & Feeds
SEARCH
OK
Home
Search site
Products Search
by SpecialChem
Share
Feedback
Get link
Copy
Save
Cette page a bien été ajoutée à vos favoris
View all pages saved
CONTINUE BROWSING
Products (
90
)
Documents (
0
)
News (
0
)
REFINE YOUR SEARCH
(
active filters)
75
products match your search
Detailed
List
Product Name
Supplier
Description
EXOTHANE™ X-726-0000
Esstech
EXOTHANE™ X-726-0000 by Esstech is a relatively low viscosity difunctional methacrylate oligomer. It exhibits good flexibility and non-yellowing properties. It is recommended for energy curable applications...
view more
Applications
Dental
EXOTHANE™ X-850-0000
Esstech
Urethane dimethacrylate (> 90 wt./ wt.%). It is a clear pale yellow liquid having low viscosity. Slightly soluble in water. Cures to form a light-colored, bisphenol A-free, hard, glassy surface...
view more
EXOTHANE™ X-891-0000
Esstech
Urethane dimethacrylate (70-100 wt./wt. %). It is a viscous liquid at room temperature. Forms a soft, yet tough polymer. Complies with TSCA (Toxic Substance Control Act List), 21 CFR of FDA (Food...
view more
EXOTHANE™ X-892-0000
Esstech
Urethane dimethacrylate (70-100 wt./wt. %). It is a viscous liquid. Exhibits high flexibility on curing. Forms homopolymer which exhibits unique ability to re-adhere to itself at lower tensile...
view more
EXOTHANE™ X-893-0000
Esstech
Urethane tetramethacrylate (70-100 wt./wt. %). It is a viscous liquid. Exhibits low color and low viscosity. Possesses increased cross-linking capacity. Forms polymers with high Shore D hardness...
view more
EXOTHANE™ X-894-0000
Esstech
Urethane dimethacrylate (70-100 wt./wt. %). It is a viscous liquid. Exhibits low color and low viscosity. Possesses the ability to re-adhere to itself after breaking. Provides improved flexibility...
view more
EXOTHANE™ X-930-0000
Esstech
Urethane dimethacrylate (80-100 wt./wt. %). It is a clear pale yellow liquid. Provides very low shrinkage values upon cure as well as good conversion and enhanced toughness. Exhibits high viscosity...
view more
EXOTHANE™ X-991-0000
Esstech
Urethane acrylate (70-100 wt. /wt. %). It is a clear viscous liquid. Possesses high rate of conversion with low average shrinkage stress. Forms a tough polymer. Complies with TSCA (Toxic Substance...
view more
EXOTHANE™ X-992-0000
Esstech
Urethane acrylate (70-100 wt. /wt. %). It is a very soft, rubber-like, clear viscous liquid. Possesses very high conversion and very low shrinkage. Complies with TSCA (Toxic Substance Control Act...
view more
PL -100
Esstech
70:30 Blend of oligo [2-hydroxy-2-methyl-1-[4-(1-methylvinyl) phenyl] propanone] and 2-hydroxy-2-methyl-1-phenyl-1-propanone. Acts as a fast curing type-I photo initiator. It is soluble in most...
view more
Applications
Adhesives
PL -150
Esstech
Oligo [2-hydroxy-2-methyl-1-[4-(1-methylvinyl) phenyl] propanone] and 2-hydroxy-2-methyl-1-phenyl-1-propanone. Acts as a very fast curing type-I photo initiator. It is soluble in most monomers...
view more
Applications
Adhesives
PL -4265
Esstech
50:50 Liquid blend of 2-hydroxy-2-methyl-1-phenyl-1-propanone and diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide. Acts as a photo initiator. It is soluble in most monomers, oligomers and...
view more
Applications
Adhesives
PL -460
Esstech
It acts as a photoinititiator. It is soluble in most monomers, oligomers and pre-polymers but insoluble in water. PL -460 is an easy to use liquid. Offers very fast curing and low yellowing...
view more
Applications
Adhesives
PL -500
Esstech
Eutectic blend made up of a 1:1 mixture of 1-hydroxy-cyclohexylphenyl-ketone (PL-CPK) and benzophenone (PL-BPO). Acts as a photoinitiator. It is an easy to use liquid. PL -500 is soluble in most...
view more
Applications
Adhesives
PL -600
Esstech
It acts as a liquid photoinitiator. It is soluble in most monomers, oligomers and pre-polymers but insoluble in water. Exhibits very fast curing and low yellowing properties. Recommended usage level...
view more
Applications
Adhesives
PL -CLR
Esstech
It acts as a photoinitiator. It is an easy to use liquid. PL -CLR is soluble in most monomers, oligomers and pre-polymers but insoluble in water. Offers very fast curing and low yellowing...
view more
Applications
Adhesives
PL -HMPP
Esstech
2-Hydroxy-2-methyl-1-phenyl-1-propanone. Acts as a type-I photo initiator. It is soluble in most monomers, oligomers and pre-polymers but insoluble in water. Exhibits very fast curing. Its...
view more
Applications
Adhesives
PL -TPO-L
Esstech
Diphenyl (2, 4, 6-trimethylbenzoyl) phosphine oxide. Acts as a type-I photoinitiator. It is soluble in most monomers, oligomers and prepolymers but insoluble in water. Exhibits excellent through...
view more
Applications
Adhesives
PL -WHT
Esstech
It acts as a photoinitiator. It is an easy to use liquid. PL -WHT is soluble in most monomers, oligomers and prepolymers but insoluble in water. Exhibits very fast curing and low yellowing...
view more
Applications
Adhesives
X 745-0000 1, 3 - Glycerol Dimethacrylate/Succinate Adduct
Esstech
1, 3 - Glycerol dimethacrylate/ succinate adduct. It is a yellow to milky white liquid with mild pleasant odor. Complies with FDA as stated in 21 CFR and 40 CFR 720.3(e) (6). Enables use in small...
view more
1
2
3
4
Next >
Back to Top