1-Hydroxy cyclohexyl phenyl ketone. Non-yellowing photoinitiator for the initiation of polymerization in UV cure adhesives... view more

Photoinitiator TPO by Dalian Richfortune Chemicals is a diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide grade. It acts as a photoinitiator. It exhibits low volatility. It is suitable for UV curable... view more

Hydrophilic fumed silica. Acts as a photoinitiators as well as rheology modifier. Provides excellent gloss and very good anti-settling properties in pigmented systems. Offers better anti caking... view more

Hydroxyphenol benzotriazole. Acts as a highly efficient ultraviolet light absorber (UVA). Provides excellent light stability to a variety of polymers including epoxies, polyesters, urethanes as well... view more

2,4,6-Trimethylbenzoyl-diphenyl-phosphineoxide. Acts as a highly efficient free radical type I solid photoinitiator. It is used to initiate the UV polymerization of styrene-based unsaturated... view more

Omnirad 819 by IGM Resins is a versatile photoinitiator for radical polymerization of unsaturated resins. It is suitable for clear-, white-, pigmented- and water-based systems. It provides through... view more

Omnirad 907 by IGM Resins is a highly efficient photoinitiator. It is 2-methyl-1[4-(methylthio)phenyl]-2-morpholinopropan-1-one. It is used to initiate the photo polymerization of unsaturated... view more

Esacure KB1 by IGM Resins is benzil dimethyl ketal based photoinitiator. It provides very good cure rate, dark storage stability (shelf life) even at high dosage rate, minimal variation in color and... view more

Esacure KS 300 by IGM Resins is alpha-hydroxy-cyclohexyl-phenyl-ketone based photoinitiator. It provides high reactivity and low yellowing properties. It is suitable for photopolymerization of UV... view more

Omnirad 651 by IGM Resins is 2,2-dimethoxy-2-phenylacetophenone based photoinitiator. Omnirad 651 is recommended for use in reactive and radiation curing adhesives... view more

Samcure® TPO by Jin Kangtai Chemical is a diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide based grade. It acts as a photoinitiator. Samcure® TPO is suitable for UV-curable adhesives... view more

Greatcure 184 by Lanxess is a highly efficient, photo-initiator in UV-curable systems. Greatcure 184 is used in adhesives... view more

SpeedBlock 326 by Lambson (Sartomer) is a 2-(5-chloro(2H)-benzotriazole-2-yl)-4-(methyl)-6-(tert-butyl)phenol. Acts as a UV absorber. Offers broad range UV protection with an absorption band width... view more

Photoinitiator used for the photopolymerization of UV Curable systems based on acrylic unsaturated oligomers and multifunctional monomers. Very good compatibility with acrylate chemistries, allows... view more

Photoinitiator used to initiate the photopolymerization by UV or visible light of unsaturated polyesters and acrylates, in combination with mono- or multifunctional monomers. Exhibits low odor in... view more

PChem® BM112A by Pioneer Chemicals is an acrylic resin produced by bulk polymerization process. Offers excellent adhesion, flexibility, low shrinkage rate and durability. Exhibits good... view more