Dynol™ 604 by Evonik is an ultra low-VOC, low-foam, non-ionic wetting agent and surfactant. It is suitable for use in waterborne systems like adhesives and concrete sealants. Possesses low foam... view more

Dynol™ 607 by Evonik is an ethoxylated acetylenic gemini surfactant and substrate wetting agent. It is used in adhesives. It offers very good flow and levelling, no recoatability, non-persistent... view more

Dynol™ 800 by Evonik is a 100% active, non-silicone, non-fluorine, low foam superwetter/surfactant. It contains no added APEs, HAPs or VOCs. It provides a superior balance of properties compared to... view more

Dynol™ 810 by Evonik is a low foam superwetter/surfactant. It is a 100% active grade with no silicone and fluorine content. Contains no added APEs, HAPs or VOCs. It is completely suitable with water... view more

Dynol™ 960 by Evonik is a siloxane based surfactant. It acts as a superwetting agent. Contains no added hazardous air pollutants (HAPs), alkylphenol ethoxylates (APEs) and volatile organic compounds... view more

Omnimer ACMO by IGM Resins is a monofunctional, UV reactive diluent for UV and EB radiation curable formulations. It exhibits excellent heat resistance, low viscosity and low odor. It shows good... view more

Omnimer NVP by IGM Resins is a versatile monofunctional reactive diluent. It is recommended for radical initiated UV radiation cured adhesives & graphic arts. It exhibits flexibility, rapid cure... view more

Omnirad 819 by IGM Resins is a versatile photoinitiator for radical polymerization of unsaturated resins. It is suitable for clear-, white-, pigmented- and water-based systems. It provides through... view more

Omnirad 907 by IGM Resins is a highly efficient photoinitiator. It is 2-methyl-1[4-(methylthio)phenyl]-2-morpholinopropan-1-one. It is used to initiate the photo polymerization of unsaturated... view more

Omnirad BDK by IGM Resins is a highly efficient type I photoinitiator. It is used to initiate radical polymerization of unsaturated oligomers such as acrylates after exposure to UV light. It can be... view more

Solsperse™ 41000 by Lubrizol is a 100% active polymeric dispersant and wetting agent. Offers high pigment loading and low viscosity. Solsperse™ 41000 is suitable for radiation curing, solvent-borne... view more

Solsperse™ 71000 by Lubrizol is a a 100% active polymeric dispersant and wetting agent. Offers high color strength and pigment loading. Solsperse™ 71000 is suitable for radiation curing adhesive... view more

PChem® BM112A by Pioneer Chemicals is an acrylic resin produced by bulk polymerization process. Offers excellent adhesion, flexibility, low shrinkage rate and durability. Exhibits good... view more

CYLINK® IBMA by Syensqo is a crosslinking bi-functional monomer that combines a readily polymerizable vinyl group and a reactive iso butoxymethyl acrylamide group. CYLINK® IBMA provides mechanical... view more

Uvacure® 1500 by Syensqo is a very pure cycloaliphatic di-epoxide resin. It is used as a primary component of cationic curing formulations for laminating and assembly adhesives. Uvacure® 1500 provides... view more

Uvacure® 1501 by Syensqo is cyloaliphatic di-epoxide. It reduces or eliminates the odor emitted by sulfonium salt photoinitiators. Uvacure® 1501 is used in cationic curing formulations for laminating and... view more

Uvacure® 1502 by Syensqo is a low viscosity, cyloaliphatic epoxide. It is used in cationic curing formulations for laminating and assembly adhesives. It offers very fast cure. Uvacure® 1502 can be used... view more

Uvacure® 1533 by Syensqo is modified cycloaliphatic epoxide. It provides enhanced flexibility, improved toughness, better chemical resistance, low color and higher cure response. It also shows... view more

NPG(PO)2DA by allnex is a light color neopentyl glycol propoxylate diacrylate used as a reactive diluent. Designed for UV/ electron beam (EB) curable laminating and pressure sensitive adhesives... view more