High performance, non-ionic formulation of silica derivatives, paraffinic oil, esters and water. Used as a foam control agent for water-based systems such as pressure sensitive adhesives and... view more

ECO Brij™ C20 by Croda is a 100% bio-based, high HLB, non-ionic surfactant. It is used as a versatile emulsifier for O/W emulsions and aqueous wetting & dispersing agent. It is produced from... view more

ECO Brij™ L4 by Croda is a 100% bio-based, non-ionic surfactant. It is produced from naturally occurring straight chain lauryl alcohol. This hydrolytically stable grade is used as a versatile &... view more

ECO Brij™ S10 by Croda is a 100% bio-based, low HLB, non-ionic surfactant. It is also used as a versatile co-emulsifier for O/W emulsions and wetting & dispersing agent. This hydrolytically stable... view more

ECO Brij™ S721 by Croda is a 100% bio-based, high HLB, non-ionic surfactant. It is produced from naturally occurring straight chain stearyl alcohol. This additive is also used as a versatile... view more

Maxemul™ 5010 by Croda is a non-ionic, co-polymerizable surfactant for use as a stabilizer in latex binders typically used in pressure-sensitive adhesives. It is reactive towards vinylic unsaturated... view more

Eastman™ Butyl Acetate by Eastman is a readily biodegradable, medium boiling ester solvent. It offers good solvent activity, high electrical resistance and low MIR value, surface tension and water solubility... view more

Silcolease® PC-195 NXL by Elkem Silicones is a biocompatible polyaddition silicone emulsion. Acts as a release modifier. Offers incremental levels release, good cures with low levels of extractable... view more

Escor™ AT 310 Blown by ExxonMobil Chemical is an acid terpolymer. It acts as an adhesion promoter and as heat seal layer... view more

Escor™ AT 310 Cast by ExxonMobil Chemical is an acid terpolymer. It acts as an adhesion promoter and as heat seal layer... view more

Escor™ AT 310 ExCo by ExxonMobil Chemical is an acid terpolymer. It acts as an adhesion promoter. It is used in demanding heat seals and shows very good adhesion properties. Escor™ AT 310 ExCo... view more

Escor™ AT 310 Molding by ExxonMobil Chemical is an ethylene acrylic acid copolymer resin. It acts as an adhesion promoter. It is used in heat-activated adhesive and sealant compounds. It possesses... view more

Escor™ AT 320 Blown by ExxonMobil Chemical is an ethylene methyl acrylate copolymer. It acts as an adhesion promoter and as a heat seal layer... view more

Polyester adipate. Acts as a polymeric plasticizer. It is highly efficient and very easy processing. Compatible with acrylic resins, nitrile, nitrocellulose, polymethyl methacrylate, polyvinyl... view more

Jeffamine® M-2095 Amine by Huntsman is polyethylene glycol (PEG)-based polyetheramine. It is a hydrophilic polyether monoamine of approximately 2000 molecular weight. Exhibits moderate viscosity... view more