Titanium dioxide, rutile white pigment dispersed in polyester plasticizer in diethylene glycol adipate carrier. Exhibits lightfastness in outdoor or indoor applications. Compatible with thermoset... view more

Diarylide AAOT GS based greenish yellow colored pigment dispersed in polyester plasticizer in diethylene glycol adipate carrier. Exhibits lightfastness in indoor application only. Compatible with... view more

Diarylide based reddish yellow colored pigment dispersed in polyester plasticizer in diethylene glycol adipate carrier. It is heat resistant. Exhibits lightfastness in outdoor or indoor masstone... view more

Corona™ 9 by Croda is skin-friendly, water in oil emulsion stabilizer that reduced tackiness. It is a scratch-resistant and anti-blocking additive. It prevents scarring on the surface, especially at... view more

Hypermer™ PS3 by Croda acts as a polymeric surfactant as well as dispersing agent. It is used for organic as well as inorganic particles in medium polarity liquids, polyacrylate oligomers, polyester... view more

Synperonic™ PE/L121 by Croda is ethoxylated polypropylene oxide-based, defoamer. This additive is used in polyether polyol building block with enhanced reactivity. It possesses good environmental &... view more

Eastman™ Butyl Acetate by Eastman is a readily biodegradable, medium boiling ester solvent. It offers good solvent activity, high electrical resistance and low MIR value, surface tension and water solubility... view more

Finntalc M15 by Elementis is floated, medium sized, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M30 by Elementis is floated, coarse, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M40 by Elementis is floated, coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. It is recommended for adhesives and polyester putties... view more

Finntalc M50 by Elementis is floated, very coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. Finntalc M50 is recommended for adhesives and polyester putties... view more

Finntalc M65 by Elementis is talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

DABCO® 1029 by Evonik acts as a catalyst. It offers good flow, fast demold times and longer cream time. It is used in adhesive & sealant, footwear applications... view more

JEFFCAT® TD-33A by Huntsman is 33% triethylenediamine solution in dipropylene glycol. Acts as a catalyst. Used for elastomers, RIM, RRIM, rigid- and packaging foam. JEFFCAT® TD-33A is suitable for... view more

JEFFCAT® Z-80 by Huntsman is a low odor N,N,N, -tris(3-dimethylaminopropyl-) amine. Acts as a catalyst. Used for elastomers, RIM, RRIM, rigid polyurethane- and packaging foam. JEFFCAT® Z-80 is... view more

Trixene® BI 7641 by Lanxess is a cross-linking agent for hydroxyl-functional resins (polyester, urethane, acrylic). DMP is the blocking agent for this aromatic blocked TDI prepolymer type... view more

Trixene® BI 7642 by Lanxess is a cross-linking agent for hydroxyl-functional resins (polyester, urethane, acrylic).This aromatic blocked TDI prepolymer type isocyanate possesses MEKO as the blocking... view more

Trixene® BI 7674 by Lanxess is a cross-linking agent for hydroxyl-functional resins (polyester, urethane, acrylic). MEKO is the blocking agent for this aromatic blocked TDI prepolymer type... view more

Trixene® BI 7675 by Lanxess is a cross-linking agent for hydroxyl-functional resins (polyester, urethane, acrylic). This aromatic blocked TDI prepolymer type isocyanate possesses MEKO as the... view more

Trixene® BI 7950 by Lanxess is a cross-linking agent for hydroxyl-functional resins (polyester, urethane, acrylic). This aliphatic blocked IPDI type isocyanate has DMP as the blocking agent... view more