Corona™ 9 by Croda is skin-friendly, water in oil emulsion stabilizer that reduced tackiness. It is a scratch-resistant and anti-blocking additive. It prevents scarring on the surface, especially at... view more

ECO Brij™ C20 by Croda is a 100% bio-based, high HLB, non-ionic surfactant. It is used as a versatile emulsifier for O/W emulsions and aqueous wetting & dispersing agent. It is produced from... view more

ECO Brij™ L4 by Croda is a 100% bio-based, non-ionic surfactant. It is produced from naturally occurring straight chain lauryl alcohol. This hydrolytically stable grade is used as a versatile &... view more

ECO Brij™ S10 by Croda is a 100% bio-based, low HLB, non-ionic surfactant. It is also used as a versatile co-emulsifier for O/W emulsions and wetting & dispersing agent. This hydrolytically stable... view more

ECO Brij™ S721 by Croda is a 100% bio-based, high HLB, non-ionic surfactant. It is produced from naturally occurring straight chain stearyl alcohol. This additive is also used as a versatile... view more

Eastman™ Butyl Acetate by Eastman is a readily biodegradable, medium boiling ester solvent. It offers good solvent activity, high electrical resistance and low MIR value, surface tension and water solubility... view more

Finntalc M15 by Elementis is floated, medium sized, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M30 by Elementis is floated, coarse, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M40 by Elementis is floated, coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. It is recommended for adhesives and polyester putties... view more

Finntalc M50 by Elementis is floated, very coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. Finntalc M50 is recommended for adhesives and polyester putties... view more

Finntalc M65 by Elementis is talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Escor™ AT 310 Molding by ExxonMobil Chemical is an ethylene acrylic acid copolymer resin. It acts as an adhesion promoter. It is used in heat-activated adhesive and sealant compounds. It possesses... view more

Expancel® 009 DU 80 by Nouryon is used as lightweight filler and blowing agent in PVC-plastisols. It is used for under-body sealants, putties, polyurethane sealants and acrylic latex caulks. It... view more

Expancel® 043 DET 80 d20 by Nouryon is used as lightweight filler and blowing agent in PVC-plastisols. It is used in polyester putties, polyurethane sealants and acrylic latex caulks. It offers high... view more

Expancel® 051 DE 40 d60by Nouryon is used as a light weight filler in polyester putties, polyurethane sealants and acrylic latex caulks. It offers high resiliency, easy compression, ability to... view more

Expancel® 051 WU 40 by Nouryon is used as lightweight filler and blowing agent in PVC-plastisols. It is used for under-body sealants, putties, polyurethane sealants and acrylic latex caulks. It... view more

Expancel® 054 WU 40 by Nouryon is used as lightweight filler and blowing agent in PVC-plastisols. It offers high resiliency, ability to withstand several cycles of loading/unloading without... view more