Pearlstick™ 45-40/27 by Lubrizol is an aromatic, elastic, linear polycaprolactone copolyester based TPU. It is used for the production of adhesives for bonding plasticized PVC to plasticized PVC. It... view more

Pearlstick™ 45-60/03 by Lubrizol is an elastic, linear, aromatic, polycaprolactone copolyester based TPU with an extremely high crystallization rate and a medium thermoplasticity level. It finds use... view more

Pearlstick™ 45-60/03 SP by Lubrizol is linear, crystalline, polycaprolactone copolyester polyol-based thermoplastic polyurethane. It offers high tenacity and stress-strain power. Pearlstick™... view more

Pearlstick™ 45-60/08 by Lubrizol is an aromatic, elastic, linear polycaprolactone copolyester based TPU with an extremely high crystallization rate and a medium thermoplasticity level. It finds use... view more

Pearlstick™ 45-60/14 by Lubrizol is an elastic, aromatic, linear polycaprolactone copolyester based TPU with an extremely high crystallization rate and a low thermoplasticity level. It finds use in... view more

Acryflow™ P120 by LyondellBasell is a zero-VOC, solvent-free, styrene-free, low viscosity acrylic polyol. It is used for high 100% solids adhesives. It offers good compatibility with a variety of... view more

Acryflow™ P90 by LyondellBasell is a zero-VOC, solvent-free, styrene-free low viscosity acrylic polyol. It offers excellent compatibility with a variety of acrylic and polyester resins. It can be... view more

Polymeg 1000 Polyol by LyondellBasell is polytetramethylene ether glycol. It is linear in structure with a backbone of repeating tetramethylene units connected by ether linkages. The chain is capped... view more

Polymeg 2000 Polyol by LyondellBasell is polytetramethylene ether glycols (PTMEG) produced by polymerizing tetrahydrofuran. The chain is capped with primary hydroxyl units. At slightly elevated... view more

TDI 80-Type 1 by LyondellBasell is a mixture of 2,4-toluene diisocyanate and 2,6-toluene diisocyanate. TDI 80-Type 1 is used for polyurethane flexible foam (slab/molding) and non-foam urethanes such... view more

Polyurethane dispersion (aliphatic polyester). Produces soft but tough films with excellent heat and water resistance without an external crosslinker and any addional co-solvents. It is a fully... view more

Polyurethane dispersion. Produces a flexible film while maintaining a moderate hand. Provides outstanding wet adhesion to difficult substrates. Offers excellent wash resistance when cross-linked... view more

ULTRAOLS™ P1030 by Macroocean is an amorphous, hydroxyl-terminated polyester polyol grade. Exhibits improved flexibility, increased open time, low melt viscosity, excellent adhesion strength and... view more

ULTRAOLS™ P1043 by Macroocean is an amorphous, hydroxyl-terminated polyester polyol grade. Exhibits improved flexibility, increased open time, low melt viscosity, excellent adhesion strength and... view more

ULTRAOLS™ P1050 by Macroocean is an amorphous, hydroxyl-terminated polyester polyol grade. Used for single-component reactive hot melt adhesives & sealants such as PUR hot melt adhesives and... view more

ULTRAOLS™ P2010 by Macroocean is an amorphous, hydroxyl-terminated polyester polyol grade. Offers increased initial strength, low melt viscosity, excellent adhesion strength and durability after... view more

ULTRAOLS™ P2025 is an amorphous, hydroxyl-terminated polyester polyol grade by Macroocean. Exhibits increased initial strength, low melt viscosity, excellent adhesion strength and durability after... view more

Takelac™ W-5030 by Mitsui Chemicals is water- & polycarbonate-based, polyurethane dispersion. It shows softness, flexibility and elasticity. It exhibits good adhesion, compatibility with various... view more

Takelac™ W-5661 by Mitsui Chemicals is water- & polycarbonate-based, polyurethane dispersion. It shows softness, flexibility and elasticity. Takelac™ W-5661 is recommended for adhesives for film... view more

Takelac™ WPB-341 by Mitsui Chemicals is non-chlorine-based, waterborne polyurethane dispersion. It offers good oxygen-barrier property on high humidity condition. It exhibits good adhesion to various films and... view more

Takelac™ WS-4000 by Mitsui Chemicals is a polyurethane dispersion (PUD) with self-cross-linking technology. It can be used as a binder for adhesives. It is recommended for film lamination (PET, PC... view more

Takelac™ WS-5000 by Mitsui Chemicals is a polyurethane dispersion (PUD) with self-cross-linking technology. It can be used as a binder for adhesives. It is recommended for film lamination (PET, PC... view more

SPUR+* 1015 Prepolymer by Momentive Performance Materials is a plasticizer-free, low viscosity, silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. It... view more

SPUR+* 1050 Prepolymer by Momentive Performance Materials is a plasticizer-free, low viscosity silylated prepolymer. It is designed for use in the manufacturing of one-part, moisture-curing... view more

SPUR+* 1060 Prepolymer by Momentive Performance Materials is a low viscosity, plasticizer-free, ethoxysilane-modified resin used in the manufacture of one-part moisture-curing adhesives and... view more

SPUR+* 3030 Prepolymer by Momentive Performance Materials is a low viscsoity, high hydrophobicity, silane-terminated polyurethane. It offers improved heat resistance and can enable broad formulation... view more