T-31A by Teda Golone Chemical is a low viscosity modified phenolic aldehyde amine resin. Acts as a curing agent. Exhibits low curing temperature (0°C), moisture curing environment, good performance... view more

T-31B by Teda Golone Chemical is a low toxicity, good performance modified phenolic aldehyde amine resin. Acts as a curing agent. Exhibits low viscosity, low curing temperature (0°C), moisture... view more

Phthalate ester. It acts as a plasticizer. Exhibits non-hazardous nature. Possesses good stability to heat and ultraviolet light. Shows a broad range of compatibility and an excellent resistance to... view more

Bis (2-ethylhexyl) succinate. Acts as a plasticizer and coalescing agent. It is a high solvating, fast fusing, phthalate-free and ‘green’ plasticizer. Exhibits low viscosity. Used in caulks... view more

PE24JA by The R.J. Marshall Company is a low-cost polyethylene fiber. It has high reinforcement strength (high tensile), improved viscosity control and rapid dispersibility. It shows excellent... view more

PE26JA by The R.J. Marshall Company is a low-cost polyethylene fiber. It has high reinforcement strength (high tensile), improved viscosity control and rapid dispersibility. It shows excellent... view more

Fine particle size, high surface area, air float kaolin clay. Acts as an excellent functional filler and rheology modifier. Exhibits low oil absorption. Provides whiteness and ensures good void... view more

ACTICIDE® 45 by Thor is a 2-n-Octyl-4-isothiazolin-3-one (46.5%) grade. Acts as an industrial microbiocide, algicide & fungicide. It controls the growth of fungi. ACTICIDE® 45 is used in adhesives... view more

ACTICIDE® C 40 by Thor is an industrial microbicide. It is chlorothalonil (Tetrachloroisophthalonitrile) (40.4%). It controls the growth of bacteria and fungi. It is used in aqueous adhesives... view more

ACTICIDE® C 98 by Thor is an industrial microbicide, algicide and fungicide. It controls the growth of bacteria and fungi. It can be used with either unmodified or alkyd modified acrylic, vinyl... view more

ACTICIDE® DT by Thor is an industrial microbiocide. It controls the growth of bacteria and fungi. It offers wet state and dry film fungicidal preservation. It is based on a concentrated glycol... view more

ACTICIDE® IMS by Thor is a mixture of 3-iodo-2-propynyl butylcarbamate (2.50%) and 2–methyl–4–isothiazolin–3–one (5%). Acts as a microbiocide. It controls the growth of bacteria and fungi in wet... view more

TITANOS TMDD 104 by Titanos is a gemini wetting agent, surfactant and molecular defoamer. Offers a unique combination of performance benefits. Exhibits unique chemical structure that provides... view more

CIMSIL A55G by Tolsa is a chloride-free, low dust, powdered thixotropic and rheological additive. It acts as an anti-sagging- and anti-slipping agent. It is designed for improving properties in... view more

CIMSIL G30 by Tolsa is an attapulgite-based, fully inert rheological additive. It is particularly designed to modify rheology of wet & dry joint compounds, fillers and adhesives. It improves sag... view more

PANGEL® M250 by Tolsa is a high purity natural sodium montmorillonite-based rheology modifier. It is very resistant against contaminated water. It produces a thickening effect on the... view more

PANGEL® RMA 400 by Tolsa is a high performance liquid rheology modifying admixture. Due to its particular & unique structure, it is suitable for shotcrete/sprayed concrete applications. It is... view more

Mercaptan modified polychloroprene rubber. Possesses rapid crystallization rate. Exhibits resistance to cold, heat, abrasion, ozone, oil and chemicals. It is available in the form of chips which are... view more

Mercaptan modified polychloroprene rubber. Possesses rapid crystallization rate. Exhibits resistance to cold, heat, abrasion, ozone, oil and chemicals. It is available in the form of chips which are... view more

Mercaptan modified polychloroprene rubber. Possesses rapid crystallization rate. Exhibits resistance to cold, heat, abrasion, ozone, oil and chemicals. It is available in the form of chips which are... view more

Mercaptan modified polychloroprene rubber. Possesses rapid crystallization rate. Exhibits resistance to cold, heat, abrasion, ozone, oil and chemicals. It is available in the form of chips which are... view more

HYDROSEAL G3H by TotalEnergies is a non-VOC organic plasticizer. This C15 - C20 dearomatized aliphatic fluid possesses extra low aromatic content. It is non- yellowing in cured sealants and... view more

HYDROSEAL HY by TotalEnergies is a phthalate-free plasticizer for hybrid sealant. It offers better elastic recovery, easy workability and no staining on wood. It exhibits high flash point, low... view more

SOLANE® 100-140 HN by TotalEnergies is a plasticizer and hydrocarbon solvent. It is used to dissolve various types of binders and polymers. It can help to control the drying properties of adhesive solvents... view more

SOLANE® 100-160 by TotalEnergies is a plasticizer and hydrocarbon solvent. It is used to dissolve various types of binders and polymers. It can help to control the drying properties of adhesive solvents... view more

SOLANE® CycloHexane by TotalEnergies is a plasticizer and hydrocarbon solvent. It is used to dissolve various types of binders and polymers. It can help to control the drying properties of adhesive solvents... view more

POLYTHICK AH distributed by Toyotsu Chemiplas is an environment-friendly acrylic resin. It is recommended for use in solventless acrylic hot-melt adhesives. It provides strong adhesion. It is suitable for... view more

POLYTHICK UP distributed by Toyotsu Chemiplas is an environment-friendly urethane resin. It can be used in solvent-free adhesives. It provides medium adhesion. It is recommended for electronic equipment... view more

LIGOS™ C 9484 by Trinseo is vinyl acrylic (VA) emulsion binder. It is suitable for use in caulk and sealant... view more

LIGOS™ C 9502 by Trinseo is styrene acrylic (SA) emulsion binder. It provides excellent water resistance and moisture barrier properties. LIGOS™ C 9502 is used in construction, masonry waterproofing and... view more

LIGOS™ M 3010 by Trinseo is styrene butadiene (SB) emulsion binder. It is used in mortar modification. Suitable for cementitious applications... view more

LIGOS™ M 3420 by Trinseo is styrene butadiene (SB) emulsion binder. It is suitable for cementitious applications... view more

LIGOS™ M 3626 by Trinseo is styrene butadiene (SB) emulsion binder. It is suitable for primer, cementitious and waterproofing applications... view more

BONTAMIDE 2010 by TrueTime Industrial Corporation is a polyamide resin. BONTAMIDE 2010 offers water resistance and good chemical property. Possible applications include adhesives for metal, wood... view more

BONTAMIDE 2010-60 by TrueTime Industrial Corporation is a low viscosity polyamide resin. It offers water resistance and good chemical property. Possible applications include adhesives for metal... view more

BONTAMIDE 2010-70 by TrueTime Industrial Corporation is a medium viscosity polyamide resin. BONTAMIDE 2010-70 shows water resistance and good chemical property. Possible applications include... view more

BONTAMIDE 2030 by TrueTime Industrial Corporation is a polyamide resin. It acts as a hardener for epoxy resin. Possible applications include adhesives for wood, metal, glass, marble, ceramics, golf... view more

BONTAMIDE 2031 by TrueTime Industrial Corporation is an odorless polyamide resin. It acts as a hardener for epoxy resin. Possible applications include adhesives for wood, metal, glass, marble... view more

Monex® by Unibond International is a non-discoloring and contaminating tetramethyl thiuram monosulfide. Offers mid-speed vulcanizing of rubber or synthetic rubber and delayed action activation in... view more

Suntack U-101 Resin is a low-cost, non-reactive aromatic C9 petroleum resin by United Performance Materials. It acts as a tackifier. Suntack U-101 Resin is recommended for hot-melt pressure... view more

Suntack U-120 Resin is an aromatic C9 petroleum resin by United Performance Materials. It acts as a tackifier. Suntack U-120 Resin is recommended for hot-melt pressure sensitive adhesives and floor... view more

Suntack U-120P Resin is an aromatic C9 petroleum resin by United Performance Materials. It acts as a tackifier. Suntack U-120P Resin is recommended for hot-melt pressure sensitive adhesives, tapes... view more

Suntack U-140 Resin is an aromatic C9 petroleum resin by United Performance Materials. It acts as a tackifier. Suntack U-140 Resin is recommended for hot-melt pressure sensitive adhesives and floor... view more

Tackifier. Possesses good compatibility and processing facilitating mixing properties. It's normally suitable for adhesive, floor tiles, hot melt ( EVA , TPR ) & hot melt pressure sensitive... view more