CYLINK® TAC by Syensqo is a crosslinking trifunctional monomer. It can form homopolymers and copolymers. It improves heat and solvent resistance, electrical properties and hardness... view more

Cycat® 185 by Syensqo is acid based catalysts for irregular wood substrates. It is used in hot-melt adhesives... view more

Cycat® HF by Syensqo is a dry catalyst. It is designed for use with melamine-urea formaldehyde resin in fast cycle, high frequency applications. It is used as hardener in heat-cured adhesives... view more

Cycat® HF-250 by Syensqo is dry catalyst, designed for use with melamine-urea formaldehyde resin in fast cycle, high frequency and hot press bonding applications. It is used as hardener in heat-cured... view more

Cymel® 9800 by Syensqo is water-soluble, thermosetting melamine formaldehyde resin. It is used for binder applications. It modifies other water-soluble or dispersible resins. It promotes... view more

Synox -1010 by Synchemer acts as an antioxidant. It is a tetrakis [methylene-3-(3, 5-di-tert-butyl-4-hydroxyphenyl-propionate)] methane. Synox -1010 shows compatibility with polyacetal, PA, PU, PET... view more

Amorphous Polyolefin by Synthomer. Eastoflex™ E1016 offers consistent quality, low odor, good heat and UV stability, good water and moisture resistance and low color. Used in adhesives for... view more

Eastoflex™ E1045 is an amorphous, saturated, low molecular weight, propylene-based olefin polymer by Synthomer. It is soft, tacky, and flexible with a broad compatibility with numerous elastomers... view more

Eastoflex™ E1060 by Synthomer is an amorphous polyolefin (copolymer of propylene and ethylene) grade. It is inherently soft, tacky and flexible. Used in automotive, building and construction, film... view more

Eastoflex™ E1200 by Synthomer is an amorphous polyolefin (copolymer of propylene and ethylene) grade. Possesses inherent softness, tackiness and flexibility. Exhibits good water and moisture... view more

Amorphous Polyolefin (APO). Eastoflex™ E2030 by Synthomer offers consistent quality, low odor, good heat and UV stability, good water and moisture resistance and low color. Used in hot-melt... view more

2,4-dihydroxybenzophenone. Used as light stabilizer in adhesives... view more

MICROSERE® 5818A by The International Group is a high performance, amorphous, malleable and opaque microcrystalline wax. Produced by de-oiling certain fractions from the petroleum refining process. It is a refined... view more

MICROSERE™ 5897A by The International Group is a high performance, amorphous, malleable and opaque microcrystalline wax. Acts as a hardening agent designed for adhesives applications. It is a... view more

Water washed, delaminated, high brightness, engineered kaolin clay. Acts as an excellent functional filler, TiO2 extender and rheology modifier. Provides excellent opacity, correct viscosity and... view more

Hydrous, medium particle size kaolin clay. Acts as an excellent functional filler and rheology modifier. Exhibits neutral pH and low oil absorption. Has a platy structure which provides improved... view more

Water washed, fine particle size kaolin clay. Acts as an excellent cost-effective functional filler, TiO2 extender and rheology modifier. Has high surface area, high aspect ratio, low oil... view more

PowerNox™ 1035 by TinToll (PCC Group) is a sulphur containing primary phenolic antioxidant and heat stabilizer. It is a thiodiethylene bis[3-(3,5-di-tert.-butyl-4-hydroxy-phenyl) propionate]. It is... view more

PowerStab™ 622 by TinToll (PCC Group) is a dimethyl succinate polymer with 4-hydroxy-2,2,6,6-tetramethyl-1-piperidine ethanol. It is a non-discoloring, polymeric hindered amine light stabilizer... view more

N-aminoethylpiperazine. Designed to manufacture thermoplastic polyamide resin used for hot-melt adhesives... view more

Diethylenetriamine. Designed to manufacture thermoplastic polyamide resin used for hot-melt adhesives... view more

Ethylenediamine. Designed to manufacture thermoplastic polyamide resin used for hot-melt adhesives... view more

Ethylene vinyl acetate copolymer. Used in seals for plastic containers and adhesives. Offers adhesion with most substrates, without the use of solvents... view more

Ethylene vinyl acetate copolymer. Used in seals for plastic containers and adhesives. Offers adhesion with most substrates, without the use of solvents... view more

Highly polymerized copolyester resin with a small amount of hydrophilic group and water containing a small amount of organic solvent. Shows excellent water resisting property because it contains a... view more

Polyethylene glycol. It is a linear polymer of ethylene oxide containing two terminal primary hydroxyl groups. Offers greater detergency, low odor and solvating power. Remains fluid at higher... view more

Mergal® K12N by Troy Corporation (Arxada) is a broad-spectrum, fast-acting microbiocide. It is a formulated isothiazolinone-based microbiocide. This grade is effective against a broad spectrum of... view more

Mergal® S 90 by Troy Corporation (Arxada) is a broad spectrum, VOC-free, color stable fungicide/algaecide. It is used for dry-film protection in adhesives, exterior applied caulks and sealants... view more

Polyphase® 641 by Troy Corporation (Arxada) is a fungicide for enhanced chemical stability in solvent-based adhesives & sealants. It provides enhanced chemical stability. This grade is effective... view more

Polyphase® 662 by Troy Corporation (Arxada) is a zero-VOC, water-based, dispersion of fungicides and algaecide. It is effective against a wide variety of fungal and algal organisms in aqueous... view more

Polyphase® 678 by Troy Corporation (Arxada) is a zero VOC, full-spectrum dry-film preservative. It offers protection against the growth of mold and mildew, as well as other types of fungi... view more

Monex® by Unibond International is a non-discoloring and contaminating tetramethyl thiuram monosulfide. Offers mid-speed vulcanizing of rubber or synthetic rubber and delayed action activation in... view more

Trimethoxy silyl modified polyethyleneimine. Used in adhesive systems. Provides multiple bonding opportunities with both inorganic substrates and polymer matrices... view more

Methyldimethoxy silyl modified polyethyleneimine. Used in adhesive systems. Provides multiple bonding opportunities with both inorganic substrates and polymer matrices... view more

PETRARCH PS077 by United Chemical Technologies is (N-triethoxysilylpropyl)o-polyethylene-oxide urethane. It sis used in adhesive systems. Provides multiple bonding opportunities with both inorganic substrates and polymer... view more

PETRARCH PS078.5 by United Chemical Technologies is triethoxysilyl modified 1,2-polybutadiene. Used in adhesive systems. PETRARCH PS078.5 provides multiple bonding opportunities with both inorganic substrates and polymer matrices... view more

PETRARCH PS078.8 by United Chemical Technologies is methyldiethoxysilyl modified 1,2-polybutadiene. Used in adhesive systems. Provides multiple bonding opportunities with both inorganic substrates and polymer matrices... view more