LIGOS™ R 3302 by Trinseo is a modified styrene butadiene binder. It shows good adhesion to a broad spectrum of substrates. It is recommended for laminating adhesives, rubber binding and specialty paper coatings.

LIGOS™ C 9504 by Trinseo is a modified styrene acrylic binder. It shows excellent adhesion to a broad spectrum of substrates. It is recommended for wet lamination and caulk sealant applications.

LIGOS™ M 3618 by Trinseo is a styrene butadiene latex for rigid cement applications including 2K WP mortar, repair mortar, 2K CTA and 2K cementitious primer. It has good cement compatibility, compression strength, flexural strength and adhesion strength. LIGOS™ M 3618 also has good environmental properties, including low odor, low formaldehyde and low TVOC. When used in cement products, it can achieve EC1+ requirements. Moreover, it is recommended for use in flexible waterproofing applications.

LIGOS™ A 3003 by Trinseo is a modified styrene butadiene binder. It can also be blended with other materials such as polyvinyl acetate (PVA) or casein to reinforce performances of the final adhesive in wet adhesion and bonding strength. It offers excellent adhesion to corrugated cardboard with films. LIGOS™ A 3003 is recommended for wet lamination adhesive applications. It is compliant with US FDA regulations.

LIGOS™ A 3215 by Trinseo is a low VOC modified styrene butadiene binder. It provides high heat & shear resistance, medium peel and tack. It offers good anchorage to film & papers face materials. When formulated with tackifier, it increases self adhesive performances such as peel strength or with additives to adjust the coating process. It exhibits very good slitting properties. LIGOS™ A 3215 is recommended for permanent pressure sensitive adhesive.