HCR-A5101 by Puyang Tiancheng Chemical is a transparent C5 aliphatic hydrocarbon resin. It acts as a tackifying agent. It shows good compatibility with terpene, rosin and their derivatives. It is... view more

HCR-A5203 by Puyang Tiancheng Chemical is a C-5 aliphatic hydrocarbon resin. It acts as a tackifying agent. It is obtained from petroleum-derived monomers. It shows excellent compatibility with... view more

HCR-C5100 by Puyang Tiancheng Chemical is a pure C-5 aliphatic hydrocarbon resin without aromatic content. It exhibits excellent compatibility with elastomers including natural rubber (NR)... view more

HCR-C5101 by Puyang Tiancheng Chemical is a pure C5 aliphatic hydrocarbon resin without aromatic content. It shows good compatibility with natural tackifying resins such as terpene, rosin and their... view more

XC-1001J by Puyang Xinde Petrochemicals is a low molecular weight, C5 petroleum resin. Acts as a tackifier. Exhibits water-proof, insulation, heat stability, photostability and chemical stability to... view more

XD-1001L by Puyang Xinde Petrochemicals is a low molecular weight, C5 petroleum resin. Acts as a tackifier. Exhibits water-proof, insulation, heat stability, photostability and chemical stability to... view more

JADEWIN AN 616 by Qingdao Jade New Material Technology is a phenol, 4-methyl-, reaction products with dicyclopentadiene and isobutylene. Acts as an antioxidant. Provides excellent processing and... view more

Wingtack® 102 by Cray Valley (Total Group) acts as a tackifier. It is a higher softening point, aliphatic C-5 hydrocarbon resin with a lower molecular weight distribution. Possesses exceptionally... view more

Zinc dibutyl dithiocarbamate. Used as a good antioxidant for NR adhesives. Offers resistance to extraction by oils and fuels and protection against thermal degradation. Suits for white and clear... view more

Amine-activated zinc dibutyl dithiocarbamate. Used as a fast primary and secondary accelerator in adhesives and sealants. Offers compatibility with NR, SBR and NBR... view more

Zinc isopropyl xanthate. Used as an active secondary accelerator in adhesives. Can be used synergically with dithiocarbamates and activated dithiocarbamates to give fast vulcanisation at room... view more

LiNO3/KNO3-mixture with foaming agent. Acts as a vulcanizing agent. It is a white granulate. Suitable for vulcanization of rubber... view more

A-1100 by Rosin Chemical(Wuping) is a C5 aliphatic hydrocarbon resin. It acts as a tackifier. It is used alone as a tackifying resin or mixed with other tackifying resin in order to improve... view more

A-1110 by Rosin Chemical(Wuping) is a C5 aliphatic hydrocarbon resin. It acts as a tackifier. It is used alone as a tackifying resin or mixed with other tackifying resin in order to improve... view more

A-1110S by Rosin Chemical(Wuping) is a C5 aliphatic hydrocarbon resin. It acts as a tackifier. It is used alone as a tackifying resin or mixed with other tackifying resin in order to improve... view more

T-100 by Rosin Chemical(Wuping) is a thermally stable polyterpene tackifier with light color and moderate softening point. It provides excellent properties to natural rubber-, synthetic resin- and... view more

T-110 by Rosin Chemical(Wuping) is a thermally stable polyterpene tackifier with light color and moderate softening point. It provides excellent properties to natural rubber-, synthetic resin- and... view more

UNI-DUR E 1001 by Sapici is polyisocyanate-based crosslinking agent. It exhibits excellent balance between hardness and elasticity. It shows good drying time, good pot-life, excellent green tack and... view more

UNI-DUR E 2002 ARFE by Sapici is polyisocyanate-based crosslinking agent for footwear. It is designed for industrial polyurethane adhesives for natural or synthetic rubbers. UNI-DUR E 2002 ARFE... view more

UNI-DUR E 2008 RC by Sapici is polyisocyanate-based crosslinker. It exhibits good drying time, good pot-life, excellent green tack and good yellowing resistance. It is recommended for the... view more

Blend of diarylamine-ketone reaction product (65%) and N,N’-diphenyl-p-phenylenediamine (35%). Acts as an antioxidant. Protects natural and synthetic rubbers against deterioration from oxygen, heat... view more

Hepteen® Base by SI Group is heptaldehyde-aniline reaction product. Used as a fast curing and high temperature accelerator in adhesives. Provides high modulus compounds with very good processing... view more

Tris (monononylphenyl) phosphite. Acts as an antioxidant. Prevents resinification of the polymer and improves hydrolysis resistance. Protects polymers against heat and oxygen degradation during... view more

Naugard® Q by SI Group is a polymerized 1,2- dihydro-2,2,4- trimethylquinoline. Used as an antioxidant. It gives good protection against degradation due to heat and oxygen. It can be used with... view more

Non-staining and non-discoloring, phosphite/phenolic blend. Acts as an effective antioxidant. Offers protection against oxygen, light and heat exposures. Provides constant Mooney viscosity and... view more

Acme PE 2031 by Saraf Resin and Chemicals is an easter gum in mineral turpentine oil. It is a rosin gum. It shows high quality and efficiency. Suitable for rubber-based adhesives... view more

Acme PE 2032 by Saraf Resin and Chemicals is an easter gum in mineral turpentine oil. It is a rosin gum. It shows high quality and efficiency. Suitable for rubber-based adhesives... view more

QLING™ A1315 by Shandong QL New Materials is a C5 aliphatic resin. It is used to tackify aliphatic polymers including natural rubber, EVA, SIS and APO. It is suitable for special and hot-melt adhesives... view more

QLING™ AB100 by Shandong QL New Materials is a C5 aliphatic resin. It is used to tackify aliphatic polymers including natural rubber, EVA, SIS and APO. It is suitable for hot melt adhesives and pressure sensitive... view more

QLING™ AS100 by Shandong QL New Materials is a C5 aliphatic resin. It is used to tackify aliphatic polymers including natural rubber, EVA, SIS and APO. It is recommended for hot-melt and pressure sensitive adhesives... view more

QLING™ AS9200 by Shandong QL New Materials is a C5 aliphatic resin. It is used to tackify aliphatic polymers including natural rubber, EVA, SIS and APO. It is suitable for hot-melt adhesives and pressure sensitive... view more

QLING™ AS9230 by Shandong QL New Materials is a C5 aliphatic resin. It is used to tackify aliphatic polymers including natural rubber, EVA, SIS and APO. It is recommended for hot melt adhesives, pressure sensitive... view more

Antioxidant 1726 by Shanghai Deborn is a multi-functional phenolic antioxidant. It is suitable for the stabilization of block-copolymers such as SBS, SIS and for polyurethane products such as PUR... view more

Gravex 913 by Shell Chemicals is naphthenic-based process oil. It is used in elastic and self-adhesive joint sealings. It offers compatibility with polychloroprene, SIS, SBR, NR, BR, IR and NBR... view more

Gravex 915 by Shell Chemicals is naphthenic-based process oil. It is suitable in elastic and self-adhesive joint sealings. It imparts compatibility with polychloroprene, SIS, SBR, NR, BR, IR and... view more

Gravex 917 by Shell Chemicals is naphthenic-based process oil. It is applicable in elastic and self-adhesive joint sealings. It provides compatibility with polychloroprene, SIS, SBR, NR, BR, IR and... view more

Gravex 918 by Shell Chemicals is naphthenic-based process oil. It finds applications in elastic and self-adhesive joint sealings. It offers compatibility with polychloroprene, SIS, SBR, NR, BR, IR... view more

Gravex 920 by Shell Chemicals is naphthenic-based process oil. It is used in elastic and self-adhesive joint sealings. It imparts compatibility with polychloroprene, SIS, SBR, NR, BR, IR and NBR... view more

MP100S by Sinochem Guangdong is a rosin modified enhanced-adhesion resin made from gum rosin by specific modification. Acts as a tackifier. Offers light color, slight smell, good hot-stability and... view more

4,6-Bis(octylthiomethyl)-o-cresol. Acts as a phenolic antioxidant. It is compatible with BR, SBR, NBR, IR, SBS, SIS and natural rubber. It can be used with secondary antioxidants and HALS. It... view more

A100 (C5) is a straight C5 (aliphatic) hydrocarbon tackifying resin by Speciality Polymers. It is a general purpose grade. It is recommended for pressure sensitive adhesives (PSA) based on natural... view more

Abalyn™ D-E by Synthomer is an alcohol-soluble, near-neutral tackifier and plasticizer resin for a wide variety of raw materials and polymers. Exhibits good clarity, high refractive index, low vapor... view more

Eastotac™ C-100L Resin by Synthomer is a hydrogenated aliphatic tackifier. Designed for adhesives and sealants including bookbinding, case & carton sealing closings, hygiene adhesives, non food... view more

Eastotac™ C-100R Resin by Synthomer is a hydrogenated aliphatic tackifier. Compatible with natural & synthetic rubbers, EVA copolymers, amorphous polyolefins, paraffin and microcrystalline waxes... view more

Eastotac™ C-100W Resin by Synthomer is an aliphatic hydrogenated tackifier. Possesses consistent quality, very good heat stability, light color and low odor. Designed for adhesives and sealants... view more

Eastotac™ C-100XF by Synthomer is a tackifier resin. It offers low initial color, low odor, and excellent thermal stability. This grade provides excellent heat stability and consistent quality. It... view more