Escorez™ 5400 by ExxonMobil Chemical is a water white cycloaliphatic hydrocarbon resins. It is designed to tackify a variety of adhesive polymers including EVA, SIS and SEBS block copolymers... view more

Escorez™ 5415 by ExxonMobil Chemical is a light color cycloaliphatic hydrocarbon resins. It is designed to tackify a variety of adhesive polymers including EVA, SIS and SEBS block copolymers... view more

Hydrogenated rosin. Acts as a tackifier. Possesses light color, high oxidation resistance and high thermal stability. Is one of the dominant varieties of modified rosin and is widely used in... view more

GR-90S by Fujian Ninghua Lifeng Chemical is rosin ester. Acts as a tackifier. Possesses light color, low odor, good oxidation resistance, heat stability, aging resistant, good compatibility with macromolecular... view more

PR-100M by Fujian Ninghua Lifeng Chemical is rosin ester. Acts as a tackifier. Possesses low odor, good oxidation resistance and heat stability. Has strong adhesive force and good compatibility with macromolecular... view more

Rosin ester. Acts as a tackifier. Possesses low odor, good oxidation resistance and heat stability. Has quite high binding strength and high softening point. Can greatly improve the binding force of... view more

138A by Guangdong Komo is a light color, partially disproportionated hydrogenated resin-based tackifier. It shows good compatibility with EVA and can be mixed with other polymers including NR, CR... view more

146 by Guangdong Komo is a light color, partially disproportionated hydrogenated resin-based tackifier. It shows good compatibility with EVA and can be mixed with other polymers including NR, CR... view more

146N by Guangdong Komo is a partially disproportionated hydrogenated resin-based tackifier. It exhibits light color, low odor, excellent thermal stability and good softness. It shows good... view more

KA100F by Guangdong Komo is a light color, low odor, partially disproportionated hydrogenated resin-based tackifier. It possesses excellent thermal stability and good softness. It shows good... view more

KA100W by Guangdong Komo acts as a tackifier for hot melt adhesives. It is a low odor, partially disproportionated, hydrogenated resin. It exhibits light color, good softness and excellent thermal... view more

Dragonox -1726 by Guangzhou Flying Dragon is 4,6-bis(dodecylthiomethyl)-o-cresol. It is a multifunctional phenolic antioxidant. It is non-staining, non-discoloring , low in volatility, resistant to extraction and... view more

Flytac 102 -100 by Guangzhou Flying Dragon is a pentaerythritol rosin ester. It acts as a tackifier. Possesses the properties of high viscosity, low VOC, excellent heat, aging stability, excellent polymer... view more

Flytac 102 -100F by Guangzhou Flying Dragon is pentaerythritol rosin ester. Acts as a tackifier. Possesses the properties of high viscosity, low VOC, excellent heat, aging stability, excellent polymer compatibility... view more

Flytac 103 -90 by Guangzhou Flying Dragon is glycerol rosin ester. Acts as a tackifier. Possesses high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Used in EVA, SBS... view more

Flytac 103 -E by Guangzhou Flying Dragon is glycerol rosin ester. Acts as a tackifier. Possesses high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Used in EVA, SBS... view more

HALLBOND® RX-13928 S by Hallstar acts as an adhesion promoter. It provides equal or better adhesion as compared to standard adhesion systems. It is compatible with butyl chlorinated rubber, EPDM, natural... view more

HALLBOND® RX-13946 D by Hallstar acts as an adhesion promoter. It provides equal or better adhesion as compared to standard adhesion systems. It is compatible with EPDM, natural rubber, nitrile, chlorinated... view more

It acts as an adipate plasticizer. It is a highly compatible plasticizer designed to provide maximum low-temperature flexibility to various types of elastomers, including natural rubber, SBR... view more

n-Butyl tallate. Acts as a monoester plasticizer. Compatible with chlorosulfonated polyethylene and natural rubber. In polychloroprene it retards the cure. It yields good low temperature... view more

Dialkylether glutarate. Acts as a monomeric plasticizer. Exhibits extremely good extraction resistance against oils and solvents when compared to other monomeric plasticizers. Compatible with... view more

ALX-1500 is a C5 aliphatic hydrocarbon resin by Henan Anglxxon Chemical. It offers good improved tack & adhesion and improved mechanical properties. It is recommended for hot melt- & pressure... view more

HR-A5100 by Henan Sanjiangyuan Chemical can be used as a tackifier resin. It is a C5 hydrocarbon resin. It is recommended for quick packaging adhesive, bookbinding adhesive, wood adhesive, adhesive... view more

HR-A5101 by Henan Sanjiangyuan Chemical can be used as a tackifier resin. It is a C5 hydrocarbon resin. It is recommended for quick packaging adhesive, bookbinding adhesive, wood adhesive, adhesive... view more

HR-A5101G by Henan Sanjiangyuan Chemical is a C5 hydrocarbon resin. It is a tackifier resin. It is recommended for quick packaging adhesive, bookbinding adhesive, wood adhesive, adhesive tape and... view more

HR-A5110 by Henan Sanjiangyuan Chemical can be used as a tackifier resin. It is C5 hydrocarbon resin. It is recommended for quick packaging adhesive, bookbinding adhesive, wood adhesive, adhesive... view more

HR-A5120 by Henan Sanjiangyuan Chemical can be used as a tackifier resin. It is C5 hydrocarbon resin. It is recommended for quick packaging adhesive, bookbinding adhesive, wood adhesive, adhesive... view more

Higree™ CL100 by Higree Chemical is C5 hydrocarbon resin. Acts as a tackifier. It is a low molecular weight, light color thermoplastic resin produced from aliphatic petroleum-derived monomers. It has good... view more

Higree™ CL1100 by Higree Chemical is a C5 hydrocarbon resin. Acts as a tackifier. It is a low molecular weight, light color thermoplastic resin produced from aliphatic petroleum-derived monomers. It has good... view more

Higree™ CL1104 by Higree Chemical is C5 hydrocarbon resin-based tackifier. It is a low molecular weight, thermoplastic resin produced from aliphatic petroleum-derived monomers. It has good compatibility with... view more

C5 hydrocarbon resin. Acts as a tackifier. It is a low molecular weight, thermoplastic resin produced from aliphatic petroleum-derived monomers. Higree™ CL1106 has good compatibility with base... view more

Hitac RA-12 by Hitac Adhesives and Coatings is a second-generation, NMP-free, VOC-free, aqueous release agent. Provides moderate release with high adhesion and high tack adhesives based on block... view more

Second-generation, NMP-free, VOC-free, aqueous release agent. Possesses high total solids. Provides easy release and low noise on fast unwinds with high adhesion and high tack adhesives based on... view more

Hitac RA-13W by Hitac Adhesives and Coatings is polyurethane release agent (water-based). Provides effective release. Yields easy to moderate unwind adhesion. It is free of precipitation and gelation below ambient... view more

Hitac RA-15W by Hitac Adhesives and Coatings is polyurethane release agent. Yields easy to moderate unwind. Its release properties are virtually identical to carbamate PVODC. No heating needed for processing. Stable at... view more

Hitac RA-21S by Hitac Adhesives and Coatings is polyurethane release agent. Offers more consistent release and other significant improvements over other liquid release agents. It has high solids content with a lower... view more

IRODUR® E 462 by Huntsman is a cross-linking agent. It is polyisocyanate and is used as hardeners for two-component polyurethane and polychloroprene adhesives Also used in solvent-based adhesive... view more

IRODUR® E 763 by Huntsman is a cross-linking agent used in solvent-based adhesive systems. It possesses good green strength, heat resistance and medium reactivity. It shows compatibility with hydroxyl... view more

IRODUR® E 803 by Huntsman is a cross-linking agent used in solvent-based adhesive systems. It possesses good green strength, heat resistance and medium reactivity. It shows compatibility with hydroxyl... view more

IRODUR® E 820 by Huntsman is a cross-linking agent used in solvent-based adhesive systems. It exhibits good green strength, heat resistance and low reactivity. It shows compatibility with hydroxyl... view more

IRODUR® F 318 N by Huntsman is a cross-linking agent used in solvent-based adhesive systems. It exhibits good green strength, heat resistance and medium reactivity. It shows compatibility with hydroxyl... view more

HYNOWA™ CF-1006 by Hynowa Hydrocarbon Resin is a thermoplastic, C5 aliphatic hydrocarbon resin. It acts as a tackifier. It exhibits light color, excellent tack properties, superior heat and chemical... view more

HYNOWA™ CF-9505 by Hynowa Hydrocarbon Resin is a thermoplastic, C5 aliphatic hydrocarbon resin. It acts as a tackifier. It exhibits light color, excellent tack properties, superior heat and chemical... view more

HYNOWA™ HC-100 by Hynowa Hydrocarbon Resin is a low softening point, aromatic-modified, aliphatic hydrocarbon resin. It acts as a tackifier and rheology modifier. Exhibits excellent compatibility with various base... view more

Indopol® H300 DLC-A by INEOS Oligomers is blend of polybutene and silicon-dioxide. Acts as a tackifier. It is used in pressure sensitive and hot-melt adhesives... view more

ICATACK® 150 by Icap Sira is aqueous, solvent-free dispersion of a mixed aliphatic-aromatic hydrocarbon resin. Used to improve adhesion in pressure sensitive adhesives based on SBR polymer dispersion... view more

Tackifier 55 by Ichemco is a solvent-free, water borne dispersion of modified natural resin. Acts as a tackifier. Exhibits excellent tack and adhesion. Shows compatibility with wide range of... view more

I-MARV™ P-115 by Idemitsu Kosan is hydrogenated petroleum resin. It acts as a tackifier. It shows well-balanced performance in heat-resistance, cold-resistance and adhesive property. It is soluble in... view more

I-MARV™ P-140 by Idemitsu Kosan is hydrogenated petroleum resin. It acts as a tackifier. It shows well-balanced performance in heat-resistance, cold-resistance and adhesive property. I-MARV™ P-140 is soluble in... view more

I-MARV™ S-125 by Idemitsu Kosan is a hydrogenated petroleum resin. It acts as a tackifier. It shows well-balanced performance in heat-resistance, cold-resistance and adhesive property. It is soluble in... view more

Di Octyl Phthalate (DOP) by Indo-Nippon Chemical is a plasticizer. It shows good compatibility with PVC, nitrocellulose, synthetic and natural rubber. Di Octyl Phthalate (DOP) is recommended for... view more

OleoPine GRS80 by Industrial Oleochemical products is a polyol ester of natural tall oil resin. It acts as a tackifier for EVA hot melt adhesives and pressure sensitive adhesives formulated with... view more

OleoPine P by Industrial Oleochemical products is a polyol ester of naturally renewable tall oil rosin. It can be used in book binding, premium EVA hot-melt adhesive and pressure sensitive adhesive... view more

OleoPine PHT by Industrial Oleochemical products is a polyol ester of naturally renewable tall oil rosin. Its stable light color and low odor properties make it ideal to exceed expected performance... view more

OleoRez RP105 L by Industrial Oleochemical Products is a tall oil rosin modified pentaerythritol ester. Acts as a tackifier. It is available as a solid nugget which offers excellent tack, adhesion... view more

OleoRez RPG90 L by Industrial Oleochemical Products is a tall oil rosin-modified glycerol ester. It acts as a tackifier. Provides excellent color stability, improved flexibility, low volatility, and... view more

AQUATAC™ 2600 by KRATON is alkyl phenol free rosin ester dispersion. It is designed for high-performance using the latest surfactant technologies. This high solids tackifier dispersion is used in... view more

AQUATAC™ 2685 by KRATON is an alkyl phenol-free rosin ester dispersion. It is designed for high-performance waterborne pressure sensitive adhesives using the latest in surfactant technologies. It is... view more

AQUATAC™ 4188 by KRATON is a high solid dispersion of rosin-based resin tackifier. It offers elevated heat resistance and excellent adhesion. It exhibits high softening point, broad compatibility... view more

AQUATAC™ 6025 by KRATON is a low softening point, high solid rosin ester. It is used a waterborne tackifier for pressure sensitive adhesives. It is suitable for modifying dispersion to improve low... view more

AQUATAC™ 6085 by KRATON is a high solid, unique rosin ester dispersion for waterborne pressure sensitive adhesives. It offers improved tack, peel and shear properties. It is compatible with... view more