Dispex™ A40 by BASF is a solution of ammonium salt of acrylic polymer in water. Dispex™ A40 is used as a highly effective, low viscosity dispersing agent for water-borne adhesive systems... view more

Dispex® G40 by BASF is a solution of a sodium salt of an acrylic copolymer in water. Used as a highly effective, low viscosity dispersing agent for water-borne adhesive systems. Dispex® G40 shows... view more

Dispex™ GA40 by BASF is a solution of an ammonium salt of an acrylic copolymer in water. Dispex™ GA40 is used as an effective, low viscosity dispersing agent for water-borne adhesive systems... view more

Dispex® N40 by BASF is a solution of a sodium salt of an acrylic polymer in water. It is used as a highly effective, low viscosity dispersing agents for water-borne systems... view more

Dispex® Ultra FA 4431 (Old name: Efka® 6230) by BASF is aliphatic polyether with acidic groups. Acts as a dispersing agent. Offers benefits such as reduced grinding and dispersion time, increased... view more

It acts as a very reactive isocyanate hardener or curing agent. Provides improved resistance against chemicals, hydrolysis and high as well as low temperature. It is free of chlorinated hydrocarbon... view more

It acts as an isocyanate hardener for the cross linking of polyurethane-, polychloroprene- and natural rubber adhesives. It is distinguished by its long pot life in polyurethane and polychloroprene... view more

Tetra n-butyl zirconate. It is a highly reactive organic alkoxy zirconate with approximately 87% active content in n-butanol. Acts as a catalyst and as an adhesion promoter. It is an effective... view more

Tetra-isopropyl titanate. It is a 100% active, highly reactive organic alkoxy titanate. Acts as a catalyst and as an adhesion promoter. It has fast cure rate and is reactive to moisture. It... view more

HALLBOND® RX-13928 S by Hallstar acts as an adhesion promoter. It provides equal or better adhesion as compared to standard adhesion systems. It is compatible with butyl chlorinated rubber, EPDM, natural... view more

n-Butyl tallate. Acts as a monoester plasticizer. Compatible with chlorosulfonated polyethylene and natural rubber. In polychloroprene it retards the cure. It yields good low temperature... view more

Dimeric ester. Acts as a plasticizer. It is a clear yellow liquid with fatty acid ester odor. Compatible with butyl, natural rubber, polychloroprene, SBR and thermoplastic polymers. It improves... view more

Coumarone indene resin. Used as plasticizer. Possesses elimination of thick residue disposal. Exhibits higher yield on usage... view more

Suprmix® CUMAR® P-25 by Hallstar is a coumarone indene resin. Acts as a plasticizer. Compatible with most elastomers. Suprmix® CUMAR® P-25 by Hallstar is suitable for adhesives and sealants... view more

Hitac RA-12 by Hitac Adhesives and Coatings is a second-generation, NMP-free, VOC-free, aqueous release agent. Provides moderate release with high adhesion and high tack adhesives based on block... view more

Second-generation, NMP-free, VOC-free, aqueous release agent. Possesses high total solids. Provides easy release and low noise on fast unwinds with high adhesion and high tack adhesives based on... view more

Hitac RA-13W by Hitac Adhesives and Coatings is polyurethane release agent (water-based). Provides effective release. Yields easy to moderate unwind adhesion. It is free of precipitation and gelation below ambient... view more

Hitac RA-15W by Hitac Adhesives and Coatings is polyurethane release agent. Yields easy to moderate unwind. Its release properties are virtually identical to carbamate PVODC. No heating needed for processing. Stable at... view more

Hitac RA-21S by Hitac Adhesives and Coatings is polyurethane release agent. Offers more consistent release and other significant improvements over other liquid release agents. It has high solids content with a lower... view more

OleoRez RT 20 by Industrial Oleochemical Products is a tall oil rosin stabilized triethylene glycol. Acts as a tackifier. It is a viscous liquid which offers excellent tack, adhesion and polarity to... view more

SYLVALITE™ RE 10L by KRATON acts as a tackifier. It is a low softening point ester of tall rosin with good stability and mild odor. It exhibits extra light color and excellent stability. It shows... view more

SYLVARES™ TR A25 by KRATON is a clear, light-colored, low molecular weight polyterpene tackifier. It improves adhesion to hard-to-bond surfaces and low temperature properties. It shows compatibility... view more

SYLVATAC™ RE 25 by KRATON is a tackifier. It is low softening point ester of tall oil rosin ester with good stability and mild odor. It has wide compatibility to be used in adhesive systems to... view more

KVIS-10 by Kothari Petrochemicals acts as an adhesion promoter, extender, plasticizer, tackifier and wetting agent. It is a clear, viscous, non-toxic and chemically inert polyisobutylene (PIB) grade. It... view more

KVIS-100 by Kothari Petrochemicals acts as an adhesion promoter, extender, plasticizer, tackifier and wetting agent. It is a clear, viscous, non-toxic and chemically inert polyisobutylene (PIB) grade. It... view more

KVIS-200 by Kothari Petrochemicals acts as an adhesion promoter, extender, plasticizer, tackifier and wetting agent. It is a clear, viscous, non-toxic and chemically inert polyisobutylene (PIB) grade. It... view more

Good-Rite® 3112 by LANXESS (previously Emerald Kalama Chemical) is a liquid mixture of polyalkylated phenolic antioxidants. It has outstanding resistance to oxidation with low volatility and good... view more

Good-Rite® 3112 LV by LANXESS (previously Emerald Kalama Chemical) is a liquid mixture of polyalkylated phenolic antioxidants. It has outstanding resistance to oxidation with low volatility and good... view more

Mesamoll® by Lanxess is a general purpose plasticizer. Exhibits good gelling behavior and saponification resistance (especially beneficial for articles which come into contact with water and... view more

Reomol TOP by Lanxess is a branched trialkyl phosphate ester-based plasticizer in adhesives. It offers enhanced thermal and hydrolytic stability. This additive possesses high solvency. It shows good... view more

Rhenosin® C 10 by Lanxess is a coumarone-indene resin-based dispersing and tackifying resin for solid rubbers and bonding solutions. Improves green tack of diene rubber mixes based on NR, SBR and... view more

Blend of anionic microcrystalline / polyethylene wax emulsion. It offers slip resistance for adhesives and sealants... view more

AGITAN® A207 by Munzing is metallic stearate. Used as defoamer in envelope / Label adhesives, wood glue adhesives, construction adhesives, natural / neoprene / nitrile and latex-based adhesives... view more

Metallic Stearate. Used as defoamer in envelope / Label adhesives, wood glue adhesives, construction adhesives, natural / neoprene / nitrile and latex-based adhesives... view more

Special wax. Used as a defoamer in most adhesive applications including PSA, laminating, packaging, envelope, wood glue, construction and natural/neoprene formulations... view more

Nytex® 810 by Nynas is a medium viscosity, severely hydrotreated naphthenic oil. Acts as a plasticizer in certain adhesives. Offers high solvating power, reduced compounding time, high oil loadings... view more

Nytex® 820 by Nynas is a heavy naphthenic oil. Acts as a plasticizer for adhesive applications. It is characterized by a clear and bright color and has a glass-transition temperature of -64°C. It... view more

Nytex® 840 by Nynas is a highly refined 2000 SUS, heavy naphthenic oil. Acts as a plasticizer. The solubility of naphthenics is also beneficial in silicone sealants and antiflutter adhesives. It... view more

Foamdoctor G2970 by PennWhite is a mixture of mineral oil and non-ionic surfactants. Acts as foam control agent. It is effective over a wide pH range and retains a high as well as long lasting efficiency... view more

Foamdoctor G2975 by PennWhite is a non-ionic surfactants in hydrophobic polyol. Acts as foam control agent. It is based on a blend of polyether and non ionic surfactants. It is mineral hydrocarbon free... view more

POLARIS II by Pinopine is a triethylene glycol ester of gum rosin. It is used as a tackifier. It is a light-yellow viscous liquid with excellent tack. It shows good compatibility with natural &... view more

POLARIS III by Pinopine is a triethylene glycol ester of gum rosin. It is used as a tackifier. It shows good compatibility with natural & synthetic rubber, EVA polymer, wax and aliphatic hydrocarbon... view more

POLARIS IV by Pinopine is a very low VOC and SVOC triethylene glycol ester of gum rosin. It shows good compatibility with natural & synthetic rubber, EVA polymer, wax and aliphatic hydrocarbon... view more

POLARIS V by Pinopine is a triethylene glycol ester of gum rosin. It is used as a tackifier. It shows good compatibility with natural & synthetic rubber, EVA polymer, wax and aliphatic hydrocarbon... view more

POLARIS VII by Pinopine is low VOC triethylene glycol ester of gum rosin without oxidative drying fatty acid. It is used as a tackifier. It provides low viscosity. POLARIS VII is recommended for... view more

Amine-activated zinc dibutyl dithiocarbamate. Used as a fast primary and secondary accelerator in adhesives and sealants. Offers compatibility with NR, SBR and NBR... view more

Hepteen® Base by SI Group is heptaldehyde-aniline reaction product. Used as a fast curing and high temperature accelerator in adhesives. Provides high modulus compounds with very good processing... view more

Tris (monononylphenyl) phosphite. Acts as an antioxidant. Prevents resinification of the polymer and improves hydrolysis resistance. Protects polymers against heat and oxygen degradation during... view more

Non-staining and non-discoloring, phosphite/phenolic blend. Acts as an effective antioxidant. Offers protection against oxygen, light and heat exposures. Provides constant Mooney viscosity and... view more

2, 2-Methylenebis (6-nonyl-p-cresol). It acts as an antioxidant. It is cheap in cost and offers protection against oxygen, light and heat exposures. Does not stain or discolor. Suitable for dry... view more

WESTON™ 705T by SI Group is a nonylphenol-free liquid phosphite-based antioxidant. It is useful in a variety of other polymer applications such as SBR, NBR, EPDM, BR, SBC, SBS, SIS, ABS, natural... view more

Gravex 913 by Shell Chemicals is naphthenic-based process oil. It is used in elastic and self-adhesive joint sealings. It offers compatibility with polychloroprene, SIS, SBR, NR, BR, IR and NBR... view more

Gravex 915 by Shell Chemicals is naphthenic-based process oil. It is suitable in elastic and self-adhesive joint sealings. It imparts compatibility with polychloroprene, SIS, SBR, NR, BR, IR and... view more

Gravex 917 by Shell Chemicals is naphthenic-based process oil. It is applicable in elastic and self-adhesive joint sealings. It provides compatibility with polychloroprene, SIS, SBR, NR, BR, IR and... view more

Gravex 918 by Shell Chemicals is naphthenic-based process oil. It finds applications in elastic and self-adhesive joint sealings. It offers compatibility with polychloroprene, SIS, SBR, NR, BR, IR... view more

Gravex 920 by Shell Chemicals is naphthenic-based process oil. It is used in elastic and self-adhesive joint sealings. It imparts compatibility with polychloroprene, SIS, SBR, NR, BR, IR and NBR... view more

4,6-Bis(octylthiomethyl)-o-cresol. Acts as a phenolic antioxidant. It is compatible with BR, SBR, NBR, IR, SBS, SIS and natural rubber. It can be used with secondary antioxidants and HALS. It... view more

Abalyn™ D-E by Synthomer is an alcohol-soluble, near-neutral tackifier and plasticizer resin for a wide variety of raw materials and polymers. Exhibits good clarity, high refractive index, low vapor... view more

Picco™ A-10 by Synthomer is a low molecular weight, non-reactive resinous plasticizer derived largely from aromatic petroleum feedstock. Acts as a tackifier. Used in caulks, sealants, contact... view more

Regalite™ C8010 is a liquid hydrogenated resin by Synthomer. Designed as a component of a multipart tackifier system in hot-melt and solvent-based pressure sensitive adhesives. Used in case & carton... view more

p-Dinitrosobenzene by Tanyun Aerospace Materials (Yingkou) Technology is a vulcanizing agent. It is suitable for thermal vulcanization adhesives. The shelf life of p-Dinitrosobenzene is 12 months... view more

ACTICIDE® 14 by Thor is a mixture of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-4-isothiazolin-3-one. It is a bivalent metal salt stabilized. It prevents the growth of bacteria and fungi... view more

ACTICIDE® LA by Thor is a mixture of 2-bromo-2-nitropropane-1, 3-diol (8.80%), 5-chloro-2-methyl-4-isothiazolin-3-one (0.85%) and 2–methyl–4–isothiazolin–3–one (0.28%). Acts as an industrial... view more

ACTICIDE® MBS by Thor is a synergistic blend of 1,2-benzisothiazolin-3-one (2.5%) and 2-methyl-4-isothiazolin-3-one (2.5%). It is a formaldehyde-free grade and acts as an industrial biocide. It... view more

ACTICIDE® MV by Thor is a mixture of 5–chloro–2–methyl–4–isothiazolin–3–one (1.11%) and 2–methyl–4–isothiazolin–3–one (0.37%). Acts as an industrial microbiocide. It controls the growth of bacteria... view more

ACTICIDE® MV 14 by Thor is a mixture of 5–chloro–2–methyl–4–isothiazolin–3–one (10.6%) and 2–methyl–4–isothiazolin–3–one (3.5%). Acts as an industrial microbiocide. It controls the growth of... view more