1,4-Butanediol by Lanxess is a hygroscopic, colorless and almost odorless liquid. 1,4-Butanediol is used in the production of polyether diols, urethane and polyester polymers (PBT & copolyester... view more

Acetine 51035 by Lanxess is a glycerol triacetate ester-based solvent and plasticizer. It is a clear liquid, readily soluble in aromatic hydrocarbons and most organic solvents. Exhibits low... view more

Addolink® 1701 by Lanxess is low viscous aromatic diamine-based chain extender/crosslinker for high quality polyurea systems. Addolink® 1701 is suitable for use in applications RIM two component PUR... view more

Adimoll® DM by Lanxess is a water-clear, low-viscosity dimethyl adipate-based viscosity depressant and as a solvent for polyurethane adhesives. Offers compatibility with epoxy resins & PVC. Adimoll®... view more

Adiprene® BL 16 by Lanxess is urethane elastomer with blocked isocyanate curing sites. It exhibits high tensile strength and excellent oil- & abrasion- resistance. The blocked curing sites allow... view more

Adiprene® BLM 500 by Lanxess is MDI based urethane prepolymer with blocked isocyanate. The blocked curing sites allow protracted storage of the polymer in the presence of moisture and active... view more

BIOBAN™ BP-10 by LANXESS is a preservative. It is used in water-based adhesives... view more

BIOBAN™ BP-30 by LANXESS is a preservative. It is used in water-based adhesives... view more

BIOBAN™ BP-40 by LANXESS is a preservative. It is used in water-based adhesives... view more

BIOBAN™ DXN by LANXESS is a broad-spectrum preservative. It is used in water-based adhesives. It is non-halogenated, non-phenolic and non-metallic. It shows compatibility with anionic, cationic and... view more

BIOCHEK® 20 by Lanxess is biocide (algicide & fungicide). It is liquid formulation of 2, 2-dibromo-3 nitrilopropionamide (20%). It controls wide range of bacteria, fungi and algae. BIOCHEK® 20 can... view more

DE-71™ by Lanxess is a high viscosity, liquid flame retardant containing aromatic bromine. It is suitable for saturated polyester, rigid & flexible polyurethane foam and epoxies. DE-71™ is used in... view more

DOWICIDE™ 25L by LANXESS is a broad-spectrum, pH-stable preservative. It is recommended for adhesives, concrete admixtures, mineral slurries. It exhibits excellent thermal stability. DOWICIDE™ 25L... view more

DOWICIDE™ 25L Antimicrobial by LANXESS is a broad-spectrum, pH-stable preservative. It is recommended for adhesives, concrete admixtures, mineral slurries. It exhibits excellent thermal stability... view more

DOWICIDE™ QK-20 Antimicrobial by LANXESS is a formaldehyde-free, broad-spectrum, fast-acting antimicrobial. It is recommended for use in adhesives... view more

DOWICIL™ QK-20 by LANXESS is a fast-acting, formaldehyde-free biocide that is ideal for reducing microbiological contamination in raw materials or products such as adhesives and caulks. It provides... view more

DP-45™ by Lanxess is a tetrabromophthalate ester-based flame retardant plasticizer for polyvinylchloride adhesives. It can be used alone or in combination with antimony trioxide. DP-45™ offers high... view more

Disflamoll® DPK by Lanxess is a phosphate-based flame retardant & plasticizer. Compatible with polyvinyl chloride (PVC), phenolic resin, polyurethane and acrylonitrile butadiene rubber. Disflamoll®... view more

Disflamoll® DPO by Lanxess is a low-viscosity, cold and weather-resistant phosphate-based flame retardant and plasticizer with good gelling behavior. It is 2- ethylhexylphosphate. It shows fast... view more

Disflamoll® TOF by Lanxess is trioctyl phosphate-based plasticizer for adhesives and sealants. Disflamoll® TOF offers very good resistance to low temperature and weathering. It is a strong... view more

FOMREZ® 11-112 by Lanxess is poly (diethylene adipate) glycol. It is a hydroxyl terminated saturated linear polyester polyol. It is suitable for adhesives. FOMREZ® 11-112 is listed under DSL... view more

FOMREZ® 11-45 by Lanxess is poly (diethylene adipate) glycol. It is a hydroxyl terminated saturated linear polyester polyol. FOMREZ® 11-45 is suitable for adhesives. It is listed with TSCA, DSL... view more

FOMREZ® 11-56 by Lanxess is a hygroscopic, poly (diethylene adipate) glycol for adhesives. It is a hydroxyl terminated saturated linear polyester polyol. FOMREZ® 11-56 is listed with DSL, EINECS... view more

FOMREZ® 66-112 by Lanxess is a hygroscopic, poly (hexamethylene adipate) glycol. It is a hydoxyl terminated saturated linear polyester polyol. It is suitable for adhesives. FOMREZ® 66-112 complies... view more

FOMREZ® 66-20 by Lanxess is poly (hexamethylene adipate) glycol for adhesives. It is hydroscopic and hydoxyl terminated saturated linear polyester polyol. FOMREZ® 66-20 is listed with TSCA, AICS... view more

FOMREZ® 66-32 by Lanxess is a hygroscopic, poly (hexamethylene adipate) glycol. It is a hydroxyl terminated saturated linear polyester polyol. It is suitable for adhesive applications. FOMREZ® 66-32... view more

FOMREZ® 66-56 by Lanxess is poly (hexamethylene adipate) glycol for adhesives. It is a hydroxyl terminated saturated linear polyester polyol. FOMREZ® 66-56 is listed with DSL, EINECS, TSCA, AICS... view more

FOMREZ® 8012-56 by Lanxess is poly (diethylene/ethylene adipate/isophthalate) glycol. It is a hydroxyl terminated saturated linear polyester polyol. FOMREZ® 8012-56 is used in adhesives... view more

FOMREZ® 8066-72 by Lanxess is a hygroscopic, poly (hexamethylene adipate/isophthalate) glycol. It is a hydroxyl terminated saturated linear polyester polyol. It is designed for adhesives. FOMREZ®... view more

FOMREZ® 8166-74 by Lanxess is poly (hexamethylene adipate/isophthalate) glycol. It is a hydroxyl terminated saturated linear polyester polyol. FOMREZ® 8166-74 is suitable for adhesives. It is listed... view more

FOMREZ® C24-53U by Lanxess is a hygroscopic, poly (ethylene/butylene adipate) glycol. It is a hydroxyl terminated saturated linear polyester polyol. FOMREZ® C24-53U is listed with TSCA, DSL, ACICS... view more

FOMREZ® F15-175 by Lanxess is a blend of diethylene and neopentyl glycol adipate. It is a polyester polyol. FOMREZ® F15-175 is used in adhesive applications... view more

FOMREZ® I24-112 by Lanxess is a blend of ethylene and butylene glycol adipate. It is a polyester polyol. FOMREZ® I24-112 is used in adhesives... view more

Firemaster® 504 by Lanxess is a flame retardant. It is a halogenated (bromine) blend of PHT4-Diol™ and phosphate ester. It is a water-insoluble dark amber liquid with a mild odor. This additive... view more

Firemaster® 520 by Lanxess is a brominated, flame retardant with high reactivity. It is suitable for rigid polyurethane and polyisocyanurate foam applications, and in polyurethane-based adhesives... view more

Good-Rite® 3112 by LANXESS (previously Emerald Kalama Chemical) is a liquid mixture of polyalkylated phenolic antioxidants. It has outstanding resistance to oxidation with low volatility and good... view more

Good-Rite® 3112 LV by LANXESS (previously Emerald Kalama Chemical) is a liquid mixture of polyalkylated phenolic antioxidants. It has outstanding resistance to oxidation with low volatility and good... view more

Good-Rite® 3131 by LANXESS (previously Emerald Kalama Chemical) is octyl butylated diphenylamine. It acts as an antioxidant. It has outstanding resistance to oxidation with low volatility and good... view more

Greatcure 1173 by Lanxess is a highly efficient photo-initiator in UV-curable systems. Greatcure 1173 is used in adhesives... view more

Hycasyl™ 510 by Lanxess is carbodiimide-based moisture scavenger. Improves the hydrolysis resistance of ester based polyurethane adhesives. Hycasyl™ 510 can be used to increase service life of high... view more

K-FLEX® 500 by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, general-purpose, polar plasticizer. It is a blend of di-propylene glycol dibenzoate and diethylene glycol dibenzoate... view more

K-FLEX® 500P by LANXESS (previously Emerald Kalama Chemical) is a polar dibenzoate plasticizer. It provides improved scrub, high gloss, excellent blocking and reduced volatile organic compounds... view more

K-FLEX® 850P by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, plasticizer. It is a blend of dipropylene glycol- and diethylene glycol dibenzoate. It is similar in composition to... view more

K-FLEX® PG by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, low-VOC, propylene glycol dibenzoate plasticizer. It can achieve excellent performance and compatibility in waterborne... view more

KATHON® LX150 by LANXESS is a water-based, formaldehyde-free, low toxicity, biodegradable biocide. It is used as in-can preservative for a wide range of adhesives and silicone emulsions. KATHON®... view more

KATHON® LXE by LANXESS is a water-based, formaldehyde-free, low toxicity, low odor, biodegradable biocide. It is used as in-can preservative for a wide range of adhesives. It is an active ingredient... view more

KORDEK® MLX by LANXESS is a volatile-, formaldehyde-, metal salts- & halogens-free, aqueous-based microbicide. It is used as a stand-alone biocide and as a co-biocide in conjunction with other... view more

Kalama® Benzyl Alcohol NF/FCC by LANXESS (previously Emerald Kalama Chemical) is a high-quality, aromatic, chlorine-free, plasticizer. It is a co-solvent for cellulose acetate and nitrocellulose. It... view more

Kalama® VITROFLEX® A90 by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, benzoate plasticizer. It has excellent safety and regulatory profile. It enables the formulators to... view more

Kalama® VITROFLEX® A99 by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, benzoate plasticizer. It has excellent safety and regulatory profiles. It enables the formulators to... view more

Kalama® VITROFLEX® B by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, benzoate plasticizer based on innovative polymeric technology. It is specially designed for the B (catalyst)... view more

Mesamoll® by Lanxess is a general purpose plasticizer. Exhibits good gelling behavior and saponification resistance (especially beneficial for articles which come into contact with water and... view more

Mesamoll® II by Lanxess is an alkylsulphonic acids phenyl esters (ASE)-based general purpose plasticizer. Exhibits good gelling behavior and saponification resistance. Used in adhesive tape, one and... view more

PHT4-DIOL by Lanxess is a reactive flame retardant in polyurethane adhesives. It is a viscous, light brown colored, tetrabromophthalate diol. PHT4-DIOL offers very good compatibility with a broad... view more

PHT4-DIOL™ LV by Lanxess is a bromine-based, flame retardant. It exhibits low viscosity (pours at room temperature). This additive shows excellent compatibility with a broad range of commercial... view more

Preventol® BIT 20 N by LANXESS is in-can preservative based on benzisothiazolinone. It is suitable for synthetic adhesives. It offers a broad spectrum of activity against bacteria, mold fungi and... view more

Preventol® CM by Lanxess is a formulation based on phenolic compounds. Used as an in-can preservative in adhesive dispersions, particularly based on proteins and casein and in animal, plant and... view more

Preventol® CMK 40 by LANXESS is an anionic, preservative for adhesives (including protein-based formulations) and glues. It is an aqueous alkaline preparation of 40% p-chloro-m-cresol. Preventol®... view more

Preventol® D 2 by Lanxess is a liquid concentrate of benzyloxymethanol-based preservative for technical aqueous adhesives. Has a broad spectrum of activity against bacteria, mold and yeasts... view more

Preventol® D 6 by Lanxess is a synergistic, aqueous formulation of isothiazolinones and glycol/formaldehyde-based preservative for solutions and dispersions of adhesives. Preventol® D 6 covers... view more

Preventol® D 7 by LANXESS is a preservative for solutions and dispersions of adhesives. It is a liquid formulation of isothiazolinones. This additive possesses low acute toxicity. It offers a broad... view more

Preventol® D 7 LT by LANXESS is in-can preservative based on monovalently stabilized isothiazolinones. It shows good compatibility. This additive offers broad spectrum against bacteria including... view more

Preventol® IT 14 MV by LANXESS is a preservative. This monovalent stabilized isothiazolinone concentrate is used for the manufacturing of ready-to-use diluted isothiazolinone-based biocidal... view more

Preventol® OF by Lanxess is a preservative for adhesives. It is a liquid, water-dilutable alkaline formulation-based on o-phenylphenol. Preventol® OF is also used as a fungicide for temporary... view more

Preventol® P 301 by LANXESS is VOC- & organic solvent-free, water-based, in-can preservative based on 2-bromo-2-nitro-1,3-propanediol (Bronopol) and isothiazolinone. It is suitable for synthetic... view more

Preventol® P 91 by LANXESS is VOC-free, in-can preservative based on 2-bromo-2-nitro-1,3-propanediol (Bronopol) and isothiazolinone. It offers broad and balanced spectrum of activity against... view more

Preventol® WB by Lanxess is a preservative in glues and adhesive dispersions particularly those based on proteins. It is a liquid combination of min. 41.7% phenolic compounds. It has a broad... view more

Quasilan® CT 23 by Lanxess is a moisture-curing product based on TDI prepolymer. It can be applied by brush, roller or spray equipment. When fully cured, it forms continuous, flexible films that... view more

Quasilan® CT 29 by Lanxess is TDI based urethane prepolymer, moisture-curing product. When fully cured, it forms continuous, flexible films that help protect against chemicals, abrasion damage as... view more

Quasilan® RB 1150 by Lanxess is a branched polyol containing both ether and ester group in the molecular backbone. Quasilan® RB 1150 is used in the manufacturing of sealants... view more

Quasilan® RB 1943 by Lanxess is a branched polyol containing both ether and ester group in the molecular backbone. Quasilan® RB 1943 is suitable for sealants... view more

Quasilan® RB 1999 by Lanxess is a branched polyol containing both ether and ester group in the molecular backbone. Quasilan® RB 1999 is recommended for sealants... view more

Reomol TBP by Lanxess is a low cost, readily biodegradable, anti-foaming agent in adhesives. It offers enhanced thermal and hydrolytic stability. Reomol TBP possesses low retention and no residual... view more

Reomol TOP by Lanxess is a branched trialkyl phosphate ester-based plasticizer in adhesives. It offers enhanced thermal and hydrolytic stability. This additive possesses high solvency. It shows good... view more

Reomol TiBP by Lanxess is an anti-foaming agent in adhesives. It is a low cost, readily biodegradable branched trialkyl phosphate ester. Reomol TiBP offers enhanced thermal and hydrolytic stability... view more

Rhenosin® C 10 by Lanxess is a coumarone-indene resin-based dispersing and tackifying resin for solid rubbers and bonding solutions. Improves green tack of diene rubber mixes based on NR, SBR and... view more

Rhenosin® TT 10 by Lanxess is petro-derived hydrocarbon resin-based dispersing and tackifying resin for solid rubbers and bonding solutions. Improves green tack of diene rubber mixes based on NR... view more

Rhenosin® TT 30 by Lanxess is a dispersing and a tackifying agent. It is petro-derived hydrocarbon resin. It is recommended for solid rubbers and bonding solutions. It improves green tack of diene... view more

Rhenosin® VU 90 by Lanxess is a plasticizer for rubber in technical seals based on synthetic or natural rubber. It is di-2-ethylhexyl-thio-di-glycolate. Improves low temperature flexibility of NBR... view more

Rhenosin® W-759 by Lanxess is ether/ester compound-based plasticizer in rubber articles over a wide range of temperatures for seals and gaskets in vehicle construction. Improves low-temperature... view more

Rhenosin® W-95 by Lanxess is adipic diester-based plasticizer in rubber articles over a wide range of temperatures for refrigerator seals. Improves low-temperature flexibility of elastomer... view more

Stabaxol® P 200 by Lanxess is polymeric carbodiimide-based hydrolysis stabilizer. It is suitable for polyester polyurethanes and thermoplastic polyester polyurethanes. It can be processed easily in... view more

UCARCIDE™ 225 Preservative by LANXESS is a broad spectrum biocide. It is used in adhesives. It offers benefits such as effectiveness over a broad pH range and high efficacy at low concentrations... view more

UCARCIDE™ 250 Preservative by LANXESS is a broad spectrum biocide. It is used in adhesives. It offers benefits such as effectiveness over a broad pH range and high efficacy at low concentrations... view more

UCARCIDE™ 50 Antimicrobial by LANXESS is a broad spectrum biocide. It is used in adhesives. It offers effectiveness over a broad range of pH and temperature conditions... view more

Ultramoll® I by Lanxess is a high-viscosity adipic polyester-based plasticizer in hot melt adhesives and adhesive film. It offers compatibility with PVC, VC copolymers, acrylonitrile-butadiene... view more

Ultramoll® II by Lanxess is high-viscosity adipic polyester-based plasticizer in hot melt adhesives and adhesive film. Offers compatibility with PVC, VC copolymers, acrylonitrile-butadiene rubber... view more

Ultramoll® III by Lanxess is a high molecular weight plasticizer in hot melt adhesives. It is a high-viscosity adipic polyester. It offers compatibility with PVC, VC copolymers... view more

Ultramoll® PP by Lanxess is a low-viscosity phthalic polyester. It is used as a plasticizer in self-adhesive film. It offers good saponification resistance, resistance to water, alkaline media... view more

Ultramoll® TGN by Lanxess is a plasticizer in self-adhesive film and for aliphatic polysulphides, specifically as a substrate for the hardness component of sealants for insulating glass. It is a... view more

Unimoll® BB by Lanxess is butyl benzyl phthalate (BBP)-based plasticizer in PVC underfloor sealing compounds, sealing and adhesive systems-based on polyurethane or polysulphide (one-and... view more

Uniplex 108 by Lanxess is used as a plasticizer in polyvinyl acetate adhesives. It is stable, widely compatible, n-ethyl-o/p-toluene sulfonamide. It makes compounds resistant to oils, solvents and... view more

Uniplex 214 by Lanxess is a stable n-butylbenzenesulfonamide-based plasticizer for polyamides especially nylon, in adhesives for nonwoven interlinings. Possesses good heat stability to 80°C and... view more

Uniplex 50 by Lanxess is a plasticizer. It is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate. It is a good substitute to solvating phthalates like DBP and BBP. It exhibits... view more

Uniplex FRP-45 by Lanxess is di-(2-ethylhexyl) tetrabromo phthalate-based flame retardant. It offers a very low volatility combined with a superior thermal and color stability. Due to its high... view more

Uniplex FRP-45 IE by Lanxess is a flame retardant. It is di-(2-ethylhexyl) tetrabromo phthalate (bromine content is 45%). It offers a very low volatility combined with a superior thermal and color... view more

VIBRATHANE® 6007 by Lanxess is TDI-polyester based prepolymer. It is a high performance resin that yields a 57 Shore A elastomer when cured with triol blends such as TMP/ TIPA. VIBRATHANE® 6007 is... view more

VIBRATHANE® 8011 by Lanxess is TDI-polyester based liquid prepolymer. It yields a 53 Shore A elastomer when cured with triol blends such as TMP/ TIPA. VIBRATHANE® 8011 is used in the production of... view more

Witcolink® AZ-28 by Lanxess is a cross-linker for both aqueous and non-aqueous adhesives. It promotes both physical and chemical properties. Is added at levels of 1% to 3% to finished formulated... view more

Witcolink® AZ-33 by Lanxess is a cross-linker for both aqueous and non-aqueous adhesives. It promotes both physical and chemical properties. This ethylene imine based tri-functional polyaziridine is... view more