Foamaster® NO 2335 (Old name: Foamaster® 350) by BASF is silicone-free blend of hydrophobic components and natural oils. Acts as a defoamer. It is based on renewable raw materials. It has... view more

Foamaster® NXZ by BASF is a blend of hydrocarbons and non-ionic surfactants. Used as a defoamer for emulsion adhesives. Compatible with styrene-butadiene, acrylic, polyvinyl chloride and its... view more

Foamaster® PL by BASF is a 100% active defoamer. It is developed to provide effective long term defoaming for water-based adhesives. Foamaster® PL is recommended for use in all major resin systems... view more

Foamaster® TCX by BASF is a defoamer. It provides efficient foam control in the manufacture of emulsion-based adhesives. It produces defect-free adhesives. It can be added at any phase of... view more

Foamaster® V by BASF is a 100% active defoamer. It provides efficient foam and froth control in the manufacture of synthetic latex and subsequently compounded adhesives. It is recommended for SBR... view more

Foamaster® VF by BASF is a 100% active, water-free defoamer. It is used in latex adhesive systems. It provides high defoaming efficiency in alkaline or acidic systems. Prevents internal microbial... view more

Foamaster® WBA by BASF is a 100 % active, broad-spectrum defoamer. It is designed to optimize effectiveness, persistence and compatibility in latex-based adhesives. It provides good film... view more

Genamid® 2000 by BASF is amidoamine resin of moderately low viscosity. Used as a curing agent for liquid or solid epoxy resins in adhesives. Genamid® 2000 offers high chemical and water resistance... view more

Genamid® 490 by BASF is a low viscosity amidoamine resin. Provides long pot life. It reacts with solid or liquid epoxy resins. Genamid® 490 can be used as all or part of the curing agent component... view more

Genamid® 747 by BASF is very low viscosity amidoamine resin designed for use with solid or liquid epoxy resins. Acts as a curing agent. Used in adhesives. Genamid® 747 is suited for high solids... view more

Hydropalat 188-A by BASF is a highly concentrated, non-ionic dispersing agent. Used in aqueous and non-aqueous adhesives. Provides fine and stable dispersion of pigments and fillers, development and... view more

Hydropalat 680 by BASF is anionic dihexyl sulphosuccinate, sodium salt. Used as a wetting agent and emulsifier in aqueous adhesives. Exhibits good emulsifying and stabilizing properties in polymer... view more

Hydropalat 875 by BASF is a highly efficient anionic wetting agent. Possesses a medium tendency of foam formation in aqueous solutions or in polymer dispersions. Provides strong reduction in surface... view more

Industrol® DF 204 by BASF is a proprietary organic antifoam agent that does not contain mineral oil. It is used in adhesive applications... view more

Irgacure® 1173 by BASF acts as a photoinitiator. It is composed of 2-hydroxy-2-methyl-1-phenyl-propan-1-one. Used in reactive and radiation curing adhesives. Irgacure® 1173 exhibits very good... view more

Irganox® 1076 Melt is octadecyl-3-[3,5-di-tert-butyl-4-hydroxyphenyl]propionate] by BASF. It is a highly efficient sterically hindered phenolic primary antioxidant. Provides processing and long-term... view more

Irganox® 1520 L by BASF is a multifunctional phenolic antioxidant based on 4,6-bis (octylthiomethyl)-o-cresol. It is non-staining, non-discoloring, low volatility grade. It is stable to light and... view more

Irganox® 1520 LR by BASF is an antioxidant for processing and long-term thermal stabilization. It contains blend of 98% 4,6-bis (octylthiomethyl)-o-cresol and 2% of epoxidized soya bean oil. It is... view more

Irganox® E 201 by BASF is an antioxidant. It contains 3,4-dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-1-benzopyran-6-ol. Provides color control during polymer processing and... view more

Irgastab® UV 22 by BASF is an in-can stabilizer that inhibits early polymerization. Suitable for UV curable formulations. Irgastab® UV 22 by BASF applications include adhesives and sealant... view more

Loxanol® MI 6735 by BASF is a multifunctional, cationic, highly effective adhesion promoter for bonding different materials. It acts as a physical or chemical cross-linking agent in adhesives. It is... view more

Loxanol® PL 5031 (Old Name: Plastilit 3431) by BASF is a plasticizer for resins and aqueous polymer dispersions. It is used in tackifying additives for dispersion adhesives such as flooring... view more

Loxanol® PL 5060 by BASF is a highly efficient plasticizer for aqueous polymer dispersions. Provides highly efficient plasticizing effect, no VOC and very low odor. Recommended dosage level is 2-5%... view more

Luphen® D DS 3548 by BASF is an aqueous, resin-modified dispersion of a polyester-polyurethane elastomer. Improves the heat resistance of the bond and its resistance to hydrolysis. Used in the... view more

Lupragen® N 106 by BASF acts as catalyst. It is soluble in water and hygroscopic in nature. Lupragen® N 106 is used for polyurethane adhesives and sealants... view more

Lupranol® 3505/1 by BASF is a trifunctional polyether polyol. It acts as a crosslinking agent. It has higher reactivity due to its content of primary hydroxyl groups... view more

Lutonal® I 60 CA. 80 % in Mineral Spirit by BASF is polyvinylisobutylether of medium molar mass dissolved in mineral spirit. Used as an adhesive raw material suitable for packaging applications such... view more

Lutonal® M 40 ca.50% in water by BASF is polyvinylmethylether, dissolved in water. It is compatible with nitrocellulose, natural resins, Laropal® aldehyde resins, Acronal® acrylic resins and Palatinol®... view more

Lutonal® M 40 ca.70% in Ethanol by BASF is polyvinylether resin, dissolved in 70% ethanol. Used to enhance the adhesion and quickstick performance of adhesives based on dextrine on metal and on... view more

Luviskol® K 30 solution by BASF is homopolymer of vinylpyrrolidone. Exhibits cross-linkability, toxicological safeness and insensitivity to pH. Used in glue sticks, remoistenable and watersoluble... view more

Luviskol® K 60 by BASF is vinylpyrrolidone homopolymer with solubilizing properties. Offers benefits such as cross-linkability, toxicological safeness and insensitivity to pH. Used in glue sticks... view more

Luviskol® K 85 by BASF is vinylpyrrolidone homopolymer. Offers benefits such as cross-linkability, toxicological safeness and insensitivity to pH. Used in glue sticks, remoistenable and watersoluble... view more

Luviskol® K 90 solution by BASF is vinylpyrrolidone homopolymer. Possesses film forming and solubilizing properties. Offers benefits such as cross-linkability, toxicological safeness and... view more

Luviskol® VA 37 I by BASF is vinylpyrrolidone and vinyl acetate copolymer in isopropanol. Used in glue sticks, remoistenable & water soluble hot-melt adhesives and flexible, skin-adhesive pads... view more

Luviskol® VA 37E by BASF is vinylpyrrolidone and vinyl acetate copolymer. Used in glue sticks, remoistenable and watersoluble hot-melt adhesives and flexible, skin-adhesive pads... view more

Luviskol® VA 55 I by BASF is copolymer of vinylpyrrolidone and vinylacetate in isopropanol. Used in glue sticks, remoistenable & water soluble hot-melt adhesives and flexible, skin-adhesive pads... view more

Luviskol® VA 55E by BASF is vinylpyrrolidone and vinyl acetate copolymer. Used in glue sticks, remoistenable & water soluble hot-melt adhesives and flexible, skin-adhesive pads... view more

Luviskol® VA 64E by BASF is vinylpyrrolidone and vinyl acetate copolymer. Used in glue sticks, remoistenable & water soluble hot-melt adhesives and flexible, skin-adhesive pads... view more

Luviskol® VA 64W by BASF is vinylpyrrolidone and vinyl acetate copolymer. Used in glue sticks, remoistenable, water soluble hot-melt adhesives and flexible, skin-adhesive pads... view more

Luviskol® VA 73 E by BASF is copolymer of vinylpyrrolidone and vinylacetate in ethanol. Used in glue sticks, remoistenable and watersoluble hot-melt adhesives and flexible, skin-adhesive pads... view more

Luviskol® VA 73W by BASF is copolymer of vinylpyrrolidone and vinylacetate in water. Used in glue sticks, remoistenable, water soluble hot-melt adhesives and flexible, skin-adhesive pads... view more

Luvitec® K 115 CQ solution by BASF is polyvinylpyrrolidone (PVP). Used in adhesive sticks, wettable gums for postage stamps, envelopes and in pick-up adhesives for bonds that can be broken and... view more

Luvitec® K 30 solution by BASF is polyvinylpyrrolidone (PVP). Used in adhesive sticks, wettable gums for postage stamps, envelopes and in pick-up adhesives for bonds that can be broken and remade... view more

Luvitec® K 30 solution 30% by BASF is polyvinylpyrrolidone. Used in glue stick. Luvitec® K 30 solution 30% has a shelf life of atleast 2 years... view more

Polyvinylpyrrolidone (PVP). Used in adhesive sticks, wettable gums for postage stamps, envelopes and in pick-up adhesives for bonds that can be broken and remade several times. Can also be used as... view more

Polyvinylpyrrolidone. Used in glue stick... view more

Polyvinylpyrrolidone (PVP). Used in adhesive sticks, wettable gums for postage stamps, envelopes and in pick-up adhesives for bonds that can be broken and remade several times. Can also be used as... view more

Polyvinylpyrrolidone (PVP). Used in glue stick... view more

Luvitec® K 90 CQ solution approx. 10% by BASF is non-toxic polyvinylpyrrolidone (PVP). It is water soluble. It can be used as protective colloid and thickening agent in adhesive dispersions... view more

Luvitec® K 90 solution approx. 20% by BASF is polyvinylpyrrolidone used in glue sticks. It is non-toxic and water soluble. Luvitec® K 90 solution approx. 20% shows a high degree of initial tack and... view more

Luvitec® VPC55 K65W by BASF is vinylpyrrolidone and vinylcaprolactam copolymer. Offers good film formation properties, reduced moisture absorption and reduced tackiness. Luvitec® VPC55 K65W is used... view more

Methacrylic acid Glacial by BASF is an unsaturated monocarboxylic acid for manufacturing polymers and for use as a feedstock for syntheses. It can be incorporated in copolymers in order to lower the... view more

Myacide™ GA 15 by BASF is 1,5-pentanedial. Offers biocidal performance alone or in combination with other actives. It is readily biodegradable with low potential to bioaccumulate. Used in water... view more

Myacide™ GA 25 by BASF is 1,5-pentanedial used as a biocide. It offers biocidal performance alone or in combination with other actives. It is readily biodegradable with low potential to... view more

Myacide™ GA 45 by BASF is 1,5-pentanedial, a biodegradable biocide. It has low potential to bioaccumulate. Offers biocidal performance alone or in combination with other actives. Used in water based... view more

Myacide™ GA 50 by BASF is 1,5-pentanedial. It is a biocide and is readily biodegradable with low potential to bioaccumulate. Offers biocidal performance alone or in combination with other actives... view more

Myacide™ GDA 50 Technical by BASF is 1,5-pentanedial, clear colorless to yellow colored grade used in water based adhesives. Offers biocidal performance alone or in combination with other actives... view more

Myacide™ HT by BASF is 1,3,5-tris-(2-hydroxyethyl)-1,3,5-hexahydrotriazine. This clear colorless to yellow colored grade is readily biodegradable. Offers biocidal performance alone or in combination... view more

Myacide™ HT Technical by BASF is 1,3,5-tris-(2-hydroxyethyl)-1,3,5-hexahydrotriazine. Offers biocidal performance alone or in combination with other actives. It is readily biodegradable with low... view more

Myacide™ S15 by BASF is an inherently biodegradable 2-bromo-2-nitropropane-1,3-diol. It acts as a biocide and offers biocidal performance alone or in combination with other actives. Myacide™ S15 is... view more

Myacide™ S2 by BASF is an inherently biodegradable 2-bromo-2-nitropropane-1,3-diol. Acts as a biocide. This grade provides biocidal performance alone or in combination with other actives. Suitable... view more

Myacide™ S30 by BASF is a 30% (w/w) solution of 2-bromo-2-nitropropane-1,3-diol in propylene glycol and water. It is biodegradable and acts as a biocide. Offers biocidal performance alone or in... view more

Oppanol® B 10 SFN by BASF is medium molecular weight polyisobutene. It is designed for pressure-sensitive adhesives mainly for medical applications. Offers gas barrier properties, electrical... view more

Oppanol® B 100 by BASF is a FDA approved polyisobutene homopolymer. It is stabilized with 500 ppm 2,6-di tert-butyl-4-methylphenol (BHT). Provides a water vapor barrier, electrical insulation, good... view more

Oppanol® B 11 SFN by BASF is polyisobutene. Exhibits water vapor barrier, electrical insulation, good adhesion, flexibility at low temperatures (cold flow) or no skin irritation. Used in combination... view more

Oppanol® B 12 SFN by BASF is polyisobutene with medium molecular weight. Exhibits water vapor barrier, electrical insulation, good adhesion, flexibility at low temperatures (cold flow) or no skin... view more

Oppanol® B 13 SFN by BASF is medium molecular weight polyisobutene grade. Offers electrical insulation, good adhesion, flexibility at low temperatures (cold flow), water vapor barrier and no skin... view more

Oppanol® B 14 SFN by BASF is polyisobutene grade. It has medium molecular weight and exhibits flexibility at low temperatures (cold flow) and no skin irritation. Provides water vapor barrier... view more

Oppanol® B 15 SFN by BASF is polyisobutene. Used in sealants and pressure-sensitive adhesives mainly for medical applications. Oppanol® B 15 SFN offers gas barrier properties... view more

Oppanol® B 150 by BASF is a medium molecular weight polyisobutene. Oppanol® B 150 is used in production of adhesives for pressure sensitive products and in permanently plastic sealants... view more

Oppanol® B 200 by BASF is a high molecular weight polyisobutene. Oppanol® B 200 is used in production of adhesives for pressure sensitive products and in permanently plastic sealants... view more

Oppanol® B 30 SF by BASF is polyisobutene. Used in production of adhesives for pressure sensitive products and in permanently plastic sealants... view more

Oppanol® B 50 by BASF is polyisobutene. Oppanol® B 50 is used in the production of adhesives for pressure sensitive products and in permanently plastic sealants... view more

Oppanol® B 50 SF by BASF is polyisobutene. The well balanced combination of adhesion and removability makes the use of Oppanol® for protective films applied on new cars. Designed for medical... view more

Oppanol® B 80 by BASF is polyisobutene. Used in production of adhesives for pressure sensitive products and in permanently plastic sealants... view more

Palatinol® 711P by BASF is phthalate plasticizer used in adhesives for automotive and medical applications. Palatinol® 711P offers low volatility, gloss finish, low-temperature flexibility and good... view more

Palatinol® 911 by BASF is a plasticizer. Provides low volatility, good low temperature performance and low fogging tendency. Palatinol® 911 is used in automobile interior equipment... view more

Palatinol® C by BASF is a phthalic acid di-isobutyl ester, di-isobutyl phthalate. Acts as a fast fusing plasticizer. Compatible with PVC resin. It is used in adhesive applications... view more

Palatinol® IC by BASF is phthalic acid di-isobutyl ester, di-isobutyl phthalate. Acts as a fast fusing plasticizer. It is too volatile for PVC applications... view more

Protectol™ GA 24 by BASF is an aqueous solution of glutaraldehyde. Used in adhesives. Acts as a preservative. Protectol™ GA 24 shows activity against a broad range of microorganisms including gram... view more

Protectol™ GA 50 by BASF is a biocide that acts as a preservative and disinfectant. Used in adhesives. It acts as an antimicrobial agent... view more

Protectol™ HT by BASF is a readily biodegradable 1,3,5-tris-(2-hydroxyethyl)-1,3,5-hexahydrotriazine. Acts as a biocide. Offers biocidal performance alone or in combination with other actives. It is... view more

Protectol™ PE by BASF is a phenoxyethanol. Acts as a biocide. Offers biocidal performance alone or in combination with other actives. Protectol™ PE is used in water-based adhesives... view more

Protectol™ PE S by BASF is a phenoxyethanol. Acts as a biocide. Offers biocidal performance alone or in combination with other actives. Protectol™ PE S is used in water based adhesives... view more

Protectol™ TD by BASF is imidazo[4,5-d]imidazol-2,5-(1H,3H)-dione,tetrahydro-1,3,4,6-tetrakis-(hydroxymethyl). Used in adhesives. Acts as a preservative. Protectol™ TD offers compatibility with... view more

Rheovis® PU 1280 by BASF is non-ionic rheology modifier for aqueous systems. It exhibits excellent mid-shear rheology-control and outstanding pseudoplasticity. Offers increased KU-viscosity, reduced... view more

Rheovis® VP 1231 by BASF is thickener for polymer dispersions and other aqueous systems. It can also be used as a protective colloid if resin solutions are mixed with polymer dispersions. Rheovis®... view more

Sovermol® 1090 by BASF is a branched polyether/polyester polyol. Used in combination with polymer MDI for production of 2 pack PUR adhesives... view more

Sulfopon 101 spez by BASF is anionic sodium lauryl sulphate with a low salt content. Possesses good emulsifying and foaming properties. Used in the manufacture of binders based on... view more

Tinopal® NFW LIQ by BASF is a biphenyl-stilbene. It is a liquid optical brightener. Tinopal® NFW LIQ is used in adhesives and sealants... view more

Tinuvin® 1130 by BASF is a liquid UV absorber of the hydroxyphenylbenzotriazole class. Exhibits high temperature and extraction resistance. Tinuvin® 1130 is used in hotmelt, reactive, solvent- &... view more

Tinuvin® 123 by BASF is a liquid hindered amine light stabilizer (HALS) based on an amino-ether functionality. It has low volatility. Its performance can be significantly improved when used in... view more

Tinuvin® 213 by BASF acts as a UV absorber belonging to hydroxyphenyl benzotriazole class which imparts good light stability to a variety of polymers. It is a reaction product of methyl... view more

Tinuvin® 292 by BASF is a liquid hindered amine light stabilizer. Tinuvin® 292 is used in hot melt, reactive, solvent- & water- based and radiation curing adhesives and sealants... view more

Tinuvin® 384-2 by BASF is a blend of benzenepropanoic acid, 3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxy-, C7-9-branched and linear alkyl esters and 1-methoxy-2-propyl acetate. Acts as... view more

Tinuvin® 400 by BASF is a liquid hydroxyphenyl-triazine (HPT) UV absorber. Exhibits low color, low migration and excellent photo-permanence. Shows minimal interaction with metal catalysts and... view more

Tinuvin® 477 is a liquid, high performance UV absorber by BASF. It is hydroxy-phenyl-s-triazine UV absorber with 18-20% 2-methoxy-1-propyl-acetate. Tinuvin® 477 is used in hotmelt, reactive... view more

Tinuvin® 479-DW by BASF acts as an UV absorber. It provides excellent photopermanence in thin film applications and very high thermal stability. Developed using novel encapsulated additive... view more

Tinuvin® 5060 by BASF is a solvent-free, liquid blend of 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a non-basic hindered amine light stabilizer (HALS). Tinuvin® 5060 is used in hotmelt... view more

Tinuvin® 571 by BASF is a liquid benzotriazole UV absorber. It imparts good light stability to a variety of polymers. Features high compatibility in various substrates, low volatility even at... view more