B-Tough™ A1 by Cargill is an epoxy functional, reactive toughening agent with lowest polarity. It provides impact strength to structural adhesives without impacting the hardness of the matrix... view more

B-Tough™ A2 by Cargill is a low polarity, epoxy functional, reactive toughening agent. It offers impact strength to structural adhesives without impacting the hardness of the matrix. It protects... view more

B-Tough™ A3 by Cargill is a medium polarity, epoxy functional, reactive toughening agent. It provides impact strength to structural adhesives without impacting the hardness of the matrix. It... view more

Eastman 168™ non-phthalate plasticizer by Eastman is a non-orthopthalate, general purpose plasticizer for PVC. Possesses performance equal or better than most ortho-phthalate plasticizers. Offers... view more

Eastman VersaBond™ Plasticizer is a phthalate-free blend of esters (100% concentration) by Eastman. Exhibits better shore hardness, viscosity, tensile strength and water uptake as compared to... view more

Admex™ 770 polymeric plasticizer by Eastman is a medium-to-high molecular weight polymeric based on a blend of adipic and phthalic acid. It is characterized by a mild ester odor and light color... view more

Benzoflex™ 2-45 Plasticizer is oxydiethylene dibenzoate by Eastman. It is an excellent solvator for polyvinyl chloride (PVC) and also shows compatibility with it. Flexible vinyl formulations which... view more

Eastman Effusion™ Plasticizer is a non-phthalate, mild odor plasticizer by Eastman. Provides lower plastisol viscosity, excellent low temperature flexibility, and fusion rates similar to typical... view more

RHEOLATE® 185 by Elementis is a low to mid-shear, low viscosity, solvent- & APEO-free, acrylic thickener. This shear thinning rheological additive is a cost-effective alkali soluble associative... view more

Oleris® Dibutyl Sebacate by Arkema is a non-toxic dibutyl sebacate. It is a colorless, odorless, transparent oily liquid. Acts as a cold resistant plasticizer for synthetic resins and rubbers... view more

Proxel™ GXL by Arxada is a 20% aqueous dipropylene glycol solution of 1,2-benzisothiazolin-3-one. It is a biocide for the preservation of industrial water-based products against spoilage from... view more

Drewplus® T-3200 by Ashland Specialty Chemical is a defoamer or foam control agent. It is formulated without the use of alkylphenolethoxylates (APEO), and are available in a variety of... view more

High performance, non-ionic formulation of silica derivatives, paraffinic oil, esters and water. Used as a foam control agent for water-based systems such as pressure sensitive adhesives and... view more

Drewplus® TW-4501 by Ashland is a foam control agent for water-based systems. It is a high performance, non-ionic formulation of silica- and wax derivatives and mineral oil. It offers very good... view more

Protectol™ GA 50 by BASF is a biocide that acts as a preservative and disinfectant. Used in adhesives. It acts as an antimicrobial agent... view more

acResin® DS 3532 by BASF is a FDA approved, UV reactive, hot melt acrylic copolymer. Offers both adhesion and cohesion. Used in pressure sensitive adhesives for label applications, as well as some... view more

acResin® DS 3552 by BASF is an UV-reactive, solvent-free acrylic copolymer. acResin® DS 3552 is used in UV-cross-linkable hot melt pressure-sensitive adhesives for self-adhesive products... view more

acResin® DS 3583 by BASF is an UV reactive, hot melt acrylic copolymer. Possesses good aging and converting properties. Offers characteristics such as versatility, optical clarity, heat and moisture... view more

Cyclohexane by Braskem is a high purity, cyclic aliphatic hydrocarbon solvent. It is used in adhesives formulation for footwear, furniture, mattresses, and automotive industries. Cyclohexane has a... view more

Methyl Isobutyl Ketone (MIBK) by Celanese is used as a solvent for adhesive systems. It exhibits a faint ketonic and camphor-like odor. This solvent is stable and does not polymerize. Methyl... view more

Mowilith® DHF 57 S by Celanese is a homopolymer emulsion of vinyl acetate. It is particularly suitable for the manufacturing of quick-setting, high quality, wood adhesives for which a high thermal... view more

Vinamul® 3479 by Celanese is a surfactant stabilized vinyl acetate, vinyl chloride and ethylene terpolymer dispersion. It exhibits very good block resistance, high bond security, excellent... view more

Vinamul® 8330 by Celanese is an aqueous, polyvinyl alcohol (PVOH) and surfactant stabilized polyvinyl acetate polymer dispersion. It exhibits fast drying & good lay-flat and offers a very good film... view more

Vinamul® 8481 by Celanese is an aqueous, polyvinyl alcohol stabilized polyvinyl acetate polymer dispersion. It exhibits very fast setting speed, high level of wet tack, high cohesive strength, high... view more

Coapur™ 3020 by Coatex (Arkema Group) is a water-borne, non-ionic rheology modifier and thickener. Exhibits good water resistance, excellent flow, homogeneous film build and good leveling. Offers... view more

Coapur™ XS 71 is a non-ionic, water-borne rheology modifier and thickener by Coatex (Arkema Group). Shows improved transfer and good leveling properties. Designed for tapes, labels and pressure... view more

RHEOTECH™ 2800 by Coatex (Arkema Group) is a water-borne, APE-free, hydrophobically modified alkali swellable acrylic (HASE) thickener. It combines the benefits of HASE with flow and leveling... view more

RHEOTECH™ 3800 is a water-borne, hydrophobically modified alkali swellable acrylic (HASE) thickener and rheology modifier by Coatex (Arkema Group). It is a low VOC, APE-free alternative to PU... view more

NeoRez® R-9621 by Covestro is an aliphatic polyester waterborne urethane for use in industrial laminating adhesives requiring a low VOC. Has good adhesion to vinyl, polyester and low-density... view more

ECO Brij™ L4 by Croda is a 100% bio-based, non-ionic surfactant. It is produced from naturally occurring straight chain lauryl alcohol. This hydrolytically stable grade is used as a versatile &... view more

ECO Brij™ S10 by Croda is a 100% bio-based, low HLB, non-ionic surfactant. It is also used as a versatile co-emulsifier for O/W emulsions and wetting & dispersing agent. This hydrolytically stable... view more

ECO Tween™ 20 by Croda is a 100% bio-based, non-ionic surfactant used as a dispersant, adjuvant, wetting agent and solubilizer. It also acts as a versatile O/W emulsifier. It is easy to handle and... view more

Fluilan™ by Croda is a lanolin-based adhesive detackifier and release aid. This water in oil emuslsion stabilizer is a skin friendly additive. Fluilan™ can be used to reduce tackiness of an adhesive... view more

Maxemul™ 6106 by Croda is an anionic, co-polymerizable surfactant designed for use as a stabilizer in latex binders typically used in pressure-sensitive adhesives and sealants. It is reactive... view more

DOWFAX™ 63N10 Nonionic Surfactant by Dow is linear EO/PO block copolymer-based foam control agent. It is produced by polymerizing ethylene oxide (EO), propylene oxide (PO), and/or butylene oxide... view more

Methylene Chloride Technical E is used as a solvent in adhesives. Methylene Chloride Technical E offers high purity, high quality, non-flammability and volatility... view more

Methylene Chloride Technical Grade by Dow is used as a solvent chlorinated in adhesives. It possesses non-flammability and volatility... view more

VORANATE™ M 2940 Polymeric MDI by Dow is a low viscosity mixture of monomeric methylene diphenyl diisocyanate isomers and homologues. It offers balanced functionality and viscosity. It enables the... view more

VORANATE™ T-80 by Dow is a mixture of the 2,4 and 2,6 isomers of toluene diisocyanate. VORANATE™ T-80 is used in adhesives and sealants... view more

Bluesil™ ESA 7244 A & B by Elkem Silicones is a liquid two-component, polyaddition heat curing silicone elastomer. It is a solvent-free, self-leveling grade designed for adhesive and sealant... view more

Silcolease® 429 by Elkem Silicones is silicone polymer diluted in an aromatic solvent. It cures by a polycondensation reaction with an organometallic compound and a crosslinker. Enables coating on... view more

Silcolease® Emulsion 70840 by Elkem Silicones is silicone emulsion. It cures fastly by a polyaddition reaction in the presence of an organic tin compound. Exhibits little foaming on processing, high... view more

Silcolease® Emulsion 902 by Elkem Silicones is silicone emulsion. It cures fastly by a polyaddition reaction in the presence of an organometallic compound. Enables offline/inline converting, high... view more

Silcolease® Emulsion 907 by Elkem Silicones is an optima silicone emulsion. It cures as a base polymer by polyaddition reaction in a 3-part formulation with crosslinker Silcolease® Emulsion XL 969... view more

Escorene™ Ultra UL 00218CC3 by ExxonMobil Chemical is a copolymer of ethylene and vinyl acetate. It contains thermal stabilizer as an additive. Escorene™ Ultra UL 00218CC3 is used in hot melt... view more

Escorene™ Ultra UL 00226CC by ExxonMobil Chemical is a copolymer of ethylene and vinyl acetate. It contains thermal stabilizer as an additive. Escorene™ Ultra UL 00226CC is used in hot melt... view more