Dynasylan® DAMO by Evonik is based on N-2-Aminoethyl-3-aminopropyltrimethoxysilane. Acts as an adhesion promoter. Offers improved flexural strength, tensile strength, impact strength and modulus of... view more

Dynasylan® GLYEO by Evonik is a 3-glycidyloxypropyltriethoxysilane compound. Acts as an adhesion promoter, crosslinking agent and/or surface modifier. Provides improved mechanical properties like... view more

Dynasylan® GLYMO by Evonik acts as an adhesion promoter, crosslinking agent and/or surface modifier. It is a low viscosity bifunctional organosilane, 3-glycidyloxypropyltrimethoxysilane with a... view more

Dynasylan® HYDROSIL 2926 by Evonik is an organofunctional siloxane oligomer. Acts as an adhesion promoter. Is an organosilicon compound (epoxyfunctional oligomeric siloxane) based on water as the... view more

Dynasylan® M by Evonik is methyl ester of orthosilicic acid. It acts as a crosslinker. It easily hydrolyses upon addition of water. It is the starting material for sol-gel processes, where the... view more

Resi4^TEX by ResiCare is an aromatic aldehyde-, water-based phenolic novolac resin that does not contain measurable SVHC (free of components meeting substance of very high concern criteria as... view more

Electron beam curable, copolymer latex of tetrafluoroethylene and propylene. Used in automotive powertrain seals such as radial shaft seals and head gaskets. Contains no organic solvents. Possesses... view more

Uvasorb® S130 is a liquid UV absorber. Offers low volatility and long term efficiency in both clear & pigmented systems. Provides superior protection against gloss reduction, cracking, blistering... view more

Resicure™ EMI-24 by A&C Catalysts is a 2-ethyl-4-methylimidazole. It is used as a sole curing agent or as a dicy and anhydride cure accelerator in epoxy resin based formulations. Offers high... view more

Resicure™ EMI-24 LV by A&C Catalysts is a 2-ethyl-4-methylimidazole. It is used as a sole curing agent or as a dicy and anhydride cure accelerator in epoxy resin based formulations. Offers high... view more

Technicure® 54 by A&C Catalysts is a 2,4,6-tris(dimethylaminomethyl) phenol. Acts as a cure accelerator. It has low viscosity. It accelerates thin film set time and cure under damp and cold... view more

2-Ethyl-4-methylimidazole. It acts as epoxy catalyst and curing agent. It appears as amber to yellow liquid. It also also delays the cross-linking of polyester reactions. It is used in adhesives... view more

1-(2-Cyanoethyl)-2-ethyl-4-methylimidazole. It acts as epoxy catalyst and curing agent. It appears as amber to brownish liquid. It is used for impact and heat resistant adhesives, and accelerator... view more

Andisil® 142 Silane by AB Specialty Silicones is alcohol-free siloxane significantly improves the adhesion and coupling between organic resins and inorganic surfaces. It is an aqueous solution of an... view more

Andisil® 171 Silane by AB Specialty Silicones functioning as a crosslinking agent, adhesion promoter and/or surface modifier. It has dual nature of its reactivity allows it to bind chemically to... view more

Andisil® 189 Silane by AB Specialty Silicones is mercapto-functional silane used as a coupling agent in polysuflide and polyurethane caulks and sealants. It is useful in sulfur-cured and metal... view more

Andisil® 78 Silane by AB Specialty Silicones is an adhesion promoter used in waterborne acrylic sealants. It eliminates the need for a separate primer in polysulfide and urethane sealants. It has a... view more

Andisil® DMOS by AB Specialty Silicones is a crosslinking agent. It is a liquid raw material used for neutral condensation curing silicone sealants. In the presence of a (tin) catalyst, this silane... view more

Pourable red liquid which cures to form a tough silicone rubber. Used in caulking and sealing of aircraft. Offers very good temperature and chemical resistance... view more

Surfadol 2502 by ACME Tech. acts as a low foam wetting agent for water-based pressure sensitive adhesives. It is an ethoxylated propoxylated-2,4,7,9-tetramethyl-5-decyne-4,7-diol. It shows good... view more

Surfadol 518 by ACME Tech. is a 2,5,8,11-tetramethyl-6-dodecyne-5,8-diol in dipropylene glycol and ethylene glycol solvent. It acts as a molecular defoamer. It is a non-toxic, APEO- and... view more

Surfadol 520 by ACME Tech. is a 2,5,8,11-tetramethyl-6-dodecyne-5,8-diol in polyethylene glycol. It acts as a molecular defoamer for water-based laminating adhesives. It is a nonionic acetylenic... view more

Surfadol 532 by ACME Tech. acts as a molecular defoamer for water-based laminating adhesives. It is a 2,5,8,11-tetramethyl-6-dodecyne-5,8-diol in dipropylene glycol. It is a non-toxic, APEO- and... view more

Surfadol 550 by ACME Tech. acts as a molecular defoamer. It is suitable for water/alcohol system and solvent-based adhesives. It is a 2,5,8,11-tetramethyl-6-dodecyne-5,8-diol in 2-butoxyethanol. It... view more

APREZ Acropol 120 by ACR Coatings is a functionalized acrylic polyol. It is a clear liquid. Offers excellent flexibility, high gloss, gloss retention and exterior durability. It is resistant to stains like... view more

BAER™ XP-9500 by ACS Technical Products is a highly functional, non-hazardous, formaldehyde-, BPA- and epichlorohydrin-free curing agent. It is a bio-based, aliphatic liquid epoxy resin designed for adhesives. It... view more

EPOXOL® CA118 by ACS Technical Products is an environment-friendly, VOC-free, non-yellowing & non-fugitive aliphatic coalescent and plasticizer. It has a high bio-derived content, making it an excellent choice for... view more

EPOXOL® EM100 by ACS Technical Products acts as a plasticizer and asphalt modifier. It is a bio-derived, highly efficient aliphatic soy ester produced using a patented process. It is compatible with common liquid... view more

EPOXOL® EMS by ACS Technical Products is a zero VOC, non-halogen functional modifier, acid scavenger and plasticizer. It is bio-based, epoxide functional reactive diluent and viscosity reducer. It is a high... view more

EPOXOL® EP159 by ACS Technical Products is a bio-based, non-fugitive & ultra-low VOC coalescing agent and plasticizer. It is non-hazardous with good stability and low HLB. It exhibits good cold temperature... view more

Proprietary blend of oils with PAG’s and surface active components. Acts as a foam control agent. It maintains the defoaming properties over a prolonged period of time and does not contain... view more

Combination of polyalkyleneglycols, organic defoamer. Improves flow and reduces viscosity. Used in adhesives... view more

Combination of polyalkylene glycols and fatty acids, organic defoamer. Improves flow and reduces viscosity. Used in adhesives... view more

ADDAPT® Foamstop SL 10 by ADDAPT Chemicals is a highly effective and versatile foam control agent. It is a Silicone Emulsion containing minerals and fatty acid based emulsifier. It is extremely stable both on storage... view more

Proprietary blend of oils with PAG’s and surface active components. Acts as a foam control agent. It maintains the defoaming properties over a prolonged period of time and does not contain... view more

ADK STAB LA-72 by ADEKA is a conventional liquid HALS. The main component is N-CH3. Has good dispersibility/solubility in sealants etc... view more

ADK STAB LA-81 by Adeka Corporation is a high performing, third generation HALS (hindered amine light stabilizer). It can stabilize polymers against photo-degradation even in strong acidic... view more

Propylene glycol. It is based on renewable and sustainable glycerol which is a by-product in the production of biodiesel from vegetable oils. It is a colorless, odorless and slightly viscous liquid... view more

AKCOBALT 0.5% by AKPA Kimya is used as an accelerator in the curing process of unsaturated polyester resin at room temperature with organic peroxide. This grade is cobalt (II) 2-ethyl hexanoate... view more

AKCOBALT 1% by AKPA Kimya is cobalt (II) 2-ethyl hexanoate grade. It is used as an accelerator in the curing process of unsaturated polyester resin at room temperature with organic peroxide... view more

AKCOBALT 10% by AKPA Kimya is an accelerator. It is used in the curing process of unsaturated polyester resin at room temperature with organic peroxide. This grade is cobalt (II) 2-ethyl hexanoate... view more

AKCOBALT 12% acts as an accelerator by AKPA Kimya. This grade is cobalt (II) 2-ethyl hexanoate grade. It is used in the curing process of unsaturated polyester resin at room temperature with organic... view more

AKCOBALT 2% by AKPA Kimya is cobalt (II) 2-ethyl hexanoate grade. It is used as an accelerator in the curing process of unsaturated polyester resin at room temperature with organic peroxide. It is... view more