OK
The material selection platform
Adhesives Ingredients
The material selection platform
Adhesives Ingredients
Waterborne adhesives Channel

Waterborne Adhesives


Water-based (or more commonly referred to as waterborne) adhesives are typically formulated from either, natural polymers – from vegetable sources (e.g. dextrins, starches), protein sources (e.g. casein, blood, fish, soybean, milk albumen), and animal sources (e.g. hides, bones), or soluble synthetic polymers – from polymers including: polyvinyl alcohol, cellulose ethers, methylcellulose, carboxymethylcellulose, and polyvinylpyrrolidone.

These adhesives may be supplied as solutions or formulated as dry powders which must be mixed with water prior to application. The strength of the adhesive is attained when water is lost from the glue line by evaporation or absorption by the substrate.

Subscribe to this channel and receive monthly digest directly into your mailbox!

6356 subscribers 275 documents
Subscribe to this channel

May 21, 2013 | Article

Formaldeyde-free, Water Resistant PVAC Wood Adhesive

The use of polyvinyl alcohol (PVOH) as a protective colloid in the emulsion polymerisation of vinyl acetate has long been known, as are the advantages conferred on a polyvinyl acetate (PVac) based...

Read more

Mar 13, 2013 | Article

Non-Phthalate Benzoate Plasticizers - Do More than Just Plasticize

By Edward M. Petrie

This article reviews the various value propositions provided by benzoate plasticizers in adhesive and sealant formulations. It primarily focuses on waterborne systems, but opportunities in other...

Read more

Feb 20, 2012 | Article

Outlook for Zero VOC Waterborne Adhesives: Coalescing Agents

By Edward M. Petrie

Alternatives to conventional solvents and other VOCs that are employed in waterborne adhesive formulations are discussed in this article. The primary focus is on coalescing agents or co-solvents...

Read more

May 16, 2011 | Article

Nano-Composites that may Lead to Practical Nano-Adhesives

By Edward M. Petrie

This editorial discusses how nanotechnology may be used in simple, cost effective waterborne or hot melt adhesive systems. These two areas of technology have been thought to be significantly...

Read more

Oct 6, 2010 | Article

Aziridine Crosslinkers

Increasing pressure sensitive adhesives strength calls for crosslinking, but often at the cost of adverse side effects like discolouring. Now, an unusual crosslinker type promises to avoid those...

Read more

Aug 25, 2010 | Article

Modern Starch Based Adhesives - Not Your Father's Starch Anymore

By Edward M. Petrie

This article takes a quick look at conventional starch adhesive technology and then progresses to discussing modified starch adhesives. Finally the article focuses on very modern forms of starch...

Read more

Aug 11, 2010 | Article

Raw materials used in non-woven adhesives formulations

By Andy Extance

Many of the applications that use non-woven fabrics adhere them with hot melt adhesives. However, water-based and solvent-based adhesive systems also have a role in this market. Adjusting the raw...

Read more

Jul 14, 2010 | Article

Rheological Issues in Modern Adhesives

By Andy Extance

Rheology, is a complex subject that helps describe how adhesives adhesives can behave like a liquid to bond but a solid to debond. As adhesives continue to evolve, so to do methods for optimising...

Read more

May 5, 2010 | Article

Biostability of water-borne adhesives

By Andy Extance

Increasing screen sizes are creates a larger electrostatic discharge problem when release liners are removed from adhesive films used in LCD manufacturing. Antistatic adhesives already exist, but...

Read more

Dec 1, 2009 | Article

Growth in Waterborne Adhesives: the move will not be that easy and quick ...

Waterborne Adhesives appeared in the first half of last century. Since then, technical improvement and expansion into a lot of applications have made of this technology the largest one used in the...

Read more

Showing 191 - 200 of 275 documents matching your search
Back to Top