BYK® -1786 by BYK is a VOC and APEO-free emulsion of hydrophobic solids and foam-destroying polysiloxanes. Acts as a defoamer for aqueous systems applied with airless or airmix methods. It has no... view more

Haloflex™ H-202 by DSM is vinyl acrylic copolymer latex. It is a water-borne emulsion. Haloflex™ H-202 exhibits low moisture vapor transmission, bond strength, water resistance and an excellent... view more

NEOCAR™ Latex 184 by Dow is a high performing, economical, vinyl terpolymer latex. It possesses high hydrophobicity, hydrolytic stability, outstanding exterior durability and high pigment binding... view more

RHEOLATE® 420 is a proprietary economical, versatile, alkali-swellable thickener. Offers high shear rate viscosity, enzyme resistance and greater brush drag. Designed to fully or partially replace... view more

Styrene-butadiene emulsion. Used in two part foam-to-foam, one and two part fast breaking spray up adhesives, and special contact or cold seal applications. Can be tackified, thickened, and blended... view more

Carboxylated styrene-butadiene emulsion. Used in pressure sensitive adhesives and mastics. Possesses very soft and resilient hand. Provides high tack and shear. Possesses an anionic... view more

High gel content, hot polymerized SBR. Used in construction adhesives, mastics and sealants. Possesses very good compatibility with commercial tackifying resin emulsions and filler tolerance. Offer... view more

High gel content, hot polymerized polybutadiene latex emulsified with rosin acid soap. Used in pressure sensitive adhesives and mastics. Possesses sensitivity to pH shock. Can be very easily... view more

High gel content, hot polymerized polybutadiene latex emulsified with a proprietary anionic surfactant system. Used in low temperature tape and label pressure sensitive adhesives, and in mastics... view more

Mainly nonionic, plastisizer free, VAC/acrylate copolymer emulsion. Used in adhesives and putties for indoor/outdoor application. Offers toughness, flexibility, very low particle size, good outdoor... view more

Ionic/nonionic, VAC/acrylate/versatate terpolymer emulsion. Used in adhesives and putties for indoor/outdoor application. Contains protective colloid. Offers permanent flexibility, very high... view more

Anionic inverse emulsion. Used as thickener for water based caulks, adhesives and sealants. Provides a short flow to a wide variety of aqueous and non-aqueous compositions and is effective over a... view more