acResin® ZeroPCF A 204 UV by BASF is an UV cross-linkable, biocides-, MOSH-, MOAH- & solvent-free, high-performance acrylic hot-melt polymer. Exhibits very good shear-, good- tack & peel properties, excellent... view more

Corona™ 9 by Croda is skin-friendly, water in oil emulsion stabilizer that reduced tackiness. It is a scratch-resistant and anti-blocking additive. It prevents scarring on the surface, especially at... view more

Maxemul™ 5010 by Croda is a non-ionic, co-polymerizable surfactant for use as a stabilizer in latex binders typically used in pressure-sensitive adhesives. It is reactive towards vinylic unsaturated... view more

Zephrym™ PD 2246 by Croda is a polymeric dispersant. It offers enhanced dispersion viscosity and extended storage capability. It is recommended for both organic and inorganic pigments including... view more

EPICLON® TSR-601 by DIC Corporation is a 100% solid, elastomer modified epoxy resin. It is flexible and exhibits excellent thermal shock resistance after curing. EPICLON® TSR-601 is used in adhesive... view more

EPICLON® TSR-960 by DIC Corporation is a modified epoxy resin. It is flexible and exhibits excellent thermal shock resistance after curing. EPICLON® TSR-960 is used in elastomeric modified adhesives... view more

Finntalc M15 by Elementis is floated, medium sized, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M30 by Elementis is floated, coarse, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M40 by Elementis is floated, coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. It is recommended for adhesives and polyester putties... view more

Finntalc M50 by Elementis is floated, very coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. Finntalc M50 is recommended for adhesives and polyester putties... view more

Finntalc M65 by Elementis is talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Jeffamine® M-2095 Amine by Huntsman is polyethylene glycol (PEG)-based polyetheramine. It is a hydrophilic polyether monoamine of approximately 2000 molecular weight. Exhibits moderate viscosity... view more

Jeffamine® M-3085 Amine by Huntsman is a hydrophilic polyether monoamine of approximately 3000 molecular weight with a PO/EO mole ratio of about 8/58. Exhibits moderate viscosity and low vapor... view more

Omnicat 270 by IGM Resins is a heavymetal-free, high-molecular-weight, sulfonium salt-based photo initiator. It is recommended for the cationic polymerization of formulations based on epoxies or... view more

Fossilized natural resin. It is a dark colored resin of Indonesian origin related to the Damars. Exhibits solubility in petroleum-, aryl- and hydrogenated aliphatic-hydrocarbons. Also soluble in... view more

NAFOL 1216 by Sasol is a blend of high purity linear primary alcohols with even-numbered carbon chain lengths, based on renewable or petrochemical resources. It is available in colorless solid form... view more

NAFOL 24+ by Sasol is a blend of high purity linear primary alcohols with even-numbered carbon chain lengths. It is available in off-white color waxy solid form with a slightly sweet odor. It is... view more

Microcrystalline wax (100% by weight). It is a white to yellow colored solid. Applications include hot melt adhesives and pipe wrapping tapes. Meets FDA (U.S. Food and Drug Administration)... view more

Microcrystalline wax (100% by weight). It is a white to yellow colored solid. Insoluble in water and soluble in oil & organic solvents. Applications include hot melt adhesives, pipe wrapping tapes... view more

Microcrystalline wax (100% by weight). It is a white to yellow colored solid. Insoluble in water and soluble in oil & organic solvents. Applications include hot melt adhesives and sealants. Meets... view more