Styrenated terpene resin (Aromatic modified terpene resin) by Foreverest Resources acts as a tackifier. Provides excellent adhesion to a range of substrates including polyolefins. Offers a very good balance of properties when compounded with styrenic block... view more

Flytac 109-7050 by Guangzhou Flying Dragon is polyalcohol rosin ester dispersion. Acts as a tackifier. Is a specially designed with highly stable 50% water-borne polymeric type tackifier dispersion. It is 100% solvent... view more

Hitac RA-13W by Hitac Adhesives and Coatings is polyurethane release agent (water-based). Provides effective release. Yields easy to moderate unwind adhesion. It is free of precipitation and gelation below ambient... view more

Hitac RA-15W by Hitac Adhesives and Coatings is polyurethane release agent. Yields easy to moderate unwind. Its release properties are virtually identical to carbamate PVODC. No heating needed for processing. Stable at... view more

Hitac RA-21S by Hitac Adhesives and Coatings is polyurethane release agent. Offers more consistent release and other significant improvements over other liquid release agents. It has high solids content with a lower... view more

A-C® 1702 by Honeywell acts as a lubricant and plasticizer. It is a synthetic, amorphous, grease-like, low temperature, low density polyethylene (PE) homopolymer grade. It improves adhesion to... view more

A-C® 325 by Honeywell is a high-density oxidized polyethylene homopolymer grade. Provides heat resistance to pressure-sensitive hot melt adhesives (HMAs). It improves adhesion to various substrates... view more

A-C® 330 by Honeywell is a high-density oxidized polyethylene homopolymer grade. Offers heat resistance to pressure-sensitive hot melt adhesives (HMAs). It improves adhesion to various substrates... view more

A-C® 392 by Honeywell is a high-density oxidized polyethylene homopolymer grade, exhibiting heat resistance to pressure-sensitive hot melt adhesives (HMAs). It increases adhesion to various... view more

SYLVALITE™ RE 10L by KRATON acts as a tackifier. It is a low softening point ester of tall rosin with good stability and mild odor. It exhibits extra light color and excellent stability. It shows... view more

SYLVARES™ TR 7115 by KRATON is a thermally stable polyterpene tackifier. It provides low odor & volatility and good aliphatic compatibility. It is compatible with natural rubber, synthetic... view more

SYLVARES™ TR 7125 by KRATON is a high softening point, thermally stable polyterpene tackifier. It provides low odor and volatility. It can used in investment casting applications and as a processing... view more

SYLVARES™ TR A25 by KRATON is a clear, light-colored, low molecular weight polyterpene tackifier. It improves adhesion to hard-to-bond surfaces and low temperature properties. It shows compatibility... view more

SYLVARES™ TR M1115 by KRATON is a bio-renewable tackifier based on polyterpene resin. It is used to tackify natural rubber, synthetic elastomer and polyolefin adhesives. It shows compatibility with... view more

Abitol™ E by Synthomer is a high molecular weight, balsamic, low odor, highly viscous tackifier resin. Exhibits high refractive index, excellent aging characteristics and reactive functionality... view more

Eastotac™ C-115R Resin by Synthomer is a hydrogenated aliphatic tackifier for adhesives and sealant applications. Compatible with natural & synthetic rubbers, EVA copolymers, amorphous polyolefins... view more

Eastotac™ C-115W Resin by Synthomer is a hydrogenated aliphatic tackifier. Exhibits consistent quality, very good heat stability, light color and low odor. Compatible with natural & synthetic... view more

Eastotac™ H-100E Resin by Synthomer is a low odor, hydrogenated aliphatic tackifier. Compatible with natural & synthetic rubbers, EVA copolymers, amorphous polyolefins, paraffin and microcrystalline... view more