Escor™ AT 310 Cast by ExxonMobil Chemical is an acid terpolymer. It acts as an adhesion promoter and as heat seal layer... view more

Escor™ AT 310 ExCo by ExxonMobil Chemical is an acid terpolymer. It acts as an adhesion promoter. It is used in demanding heat seals and shows very good adhesion properties. Escor™ AT 310 ExCo... view more

Escor™ AT 310 Molding by ExxonMobil Chemical is an ethylene acrylic acid copolymer resin. It acts as an adhesion promoter. It is used in heat-activated adhesive and sealant compounds. It possesses... view more

Hitac RA-13W by Hitac Adhesives and Coatings is polyurethane release agent (water-based). Provides effective release. Yields easy to moderate unwind adhesion. It is free of precipitation and gelation below ambient... view more

Hitac RA-15W by Hitac Adhesives and Coatings is polyurethane release agent. Yields easy to moderate unwind. Its release properties are virtually identical to carbamate PVODC. No heating needed for processing. Stable at... view more

Hitac RA-21S by Hitac Adhesives and Coatings is polyurethane release agent. Offers more consistent release and other significant improvements over other liquid release agents. It has high solids content with a lower... view more

JEFFCAT® TD-33A by Huntsman is 33% triethylenediamine solution in dipropylene glycol. Acts as a catalyst. Used for elastomers, RIM, RRIM, rigid- and packaging foam. JEFFCAT® TD-33A is suitable for... view more

JEFFCAT® Z-130 by Huntsman is a low emission reactive gel catalyst. Used for elastomers, RIM, RRIM, rigid polyurethane- and packaging foam. JEFFCAT® Z-130 is suitable for ester and ether slabstock... view more

JEFFCAT® Z-80 by Huntsman is a low odor N,N,N, -tris(3-dimethylaminopropyl-) amine. Acts as a catalyst. Used for elastomers, RIM, RRIM, rigid polyurethane- and packaging foam. JEFFCAT® Z-80 is... view more

JEFFCAT® ZR-40 by Huntsman is N,N,N',N'',N''-pentamethyl-dipropylenetriamine. It is a low odor catalyst. Provides good balance between gel and blow. It is very useful in cold-molded HR foams. Used... view more

SYLVALITE™ RE 10L by KRATON acts as a tackifier. It is a low softening point ester of tall rosin with good stability and mild odor. It exhibits extra light color and excellent stability. It shows... view more

SYLVARES™ ZT 105LT by KRATON acts as a tackifier. It is a light color, low odor, heat stable modified terpene resin. It provides an excellent balance of properties when compounded with styrenic... view more

SYLVARES™ ZT106LT by KRATON acts as a tackifier. It is light color, low odor, heat stable modified styrenated terpene resin. It is compatible in ethylene vinyl acetate (EVA) polymers, at all vinyl... view more

WESTON™ 618F by SI Group is a phosphite-based antioxidant. It is highly effective color & molecular weight stabilizer for polyolefins, polyesters and adhesive formulations. It also contributes to the... view more

WESTON™ 619F by SI Group is a phosphite-based antioxidant. It is highly effective color & molecular weight stabilizer for polyolefins, polyesters and adhesive formulations. It is suitable for... view more

Oil terpene phenolic T by Teda Golone Chemical is an oil terpene phenolic resin. Acts as a viscosity modifier. It can be completely dissolved in aromatic, aliphatic and halogenated hydrocarbon... view more

Oil terpene phenolic T105 by Teda Golone Chemical is an oil terpene phenolic resin. Acts as a viscosity modifier. It improves glue stick relay base material, thermal stability and flexibility. It... view more

Oil terpene phenolic T115 by Teda Golone Chemical is an oil terpene phenolic resin. It acts as a viscosity modifier. Shows compatibility with ethylene/ vinyl acetate/ butyl acrylate polymer, natural... view more