Styrenated terpene resin (Aromatic modified terpene resin) by Foreverest Resources acts as a tackifier. Provides excellent adhesion to a range of substrates including polyolefins. Offers a very good balance of properties when compounded with styrenic block... view more

HR-A5100 by Henan Sanjiangyuan Chemical can be used as a tackifier resin. It is a C5 hydrocarbon resin. It is recommended for quick packaging adhesive, bookbinding adhesive, wood adhesive, adhesive... view more

HR-A5101 by Henan Sanjiangyuan Chemical can be used as a tackifier resin. It is a C5 hydrocarbon resin. It is recommended for quick packaging adhesive, bookbinding adhesive, wood adhesive, adhesive... view more

HR-A5101G by Henan Sanjiangyuan Chemical is a C5 hydrocarbon resin. It is a tackifier resin. It is recommended for quick packaging adhesive, bookbinding adhesive, wood adhesive, adhesive tape and... view more

HR-A5110 by Henan Sanjiangyuan Chemical can be used as a tackifier resin. It is C5 hydrocarbon resin. It is recommended for quick packaging adhesive, bookbinding adhesive, wood adhesive, adhesive... view more

HR-A5120 by Henan Sanjiangyuan Chemical can be used as a tackifier resin. It is C5 hydrocarbon resin. It is recommended for quick packaging adhesive, bookbinding adhesive, wood adhesive, adhesive... view more

Hitac RA-13W by Hitac Adhesives and Coatings is polyurethane release agent (water-based). Provides effective release. Yields easy to moderate unwind adhesion. It is free of precipitation and gelation below ambient... view more

Hitac RA-15W by Hitac Adhesives and Coatings is polyurethane release agent. Yields easy to moderate unwind. Its release properties are virtually identical to carbamate PVODC. No heating needed for processing. Stable at... view more

Hitac RA-21S by Hitac Adhesives and Coatings is polyurethane release agent. Offers more consistent release and other significant improvements over other liquid release agents. It has high solids content with a lower... view more

A-C® 1089 by Honeywell is a synthetic wax, hard polypropylene homopolymer for use in hot melt adhesives. It increases heat resistance and improves adhesion to substrate. A-C® 1089 is recommended for... view more

A-C® 1702 by Honeywell acts as a lubricant and plasticizer. It is a synthetic, amorphous, grease-like, low temperature, low density polyethylene (PE) homopolymer grade. It improves adhesion to... view more

A-C® 1810A by Honeywell is an atomized polyethylene homopolymer grade. Acts as an adhesion promoter and partial or complete Fischer Tropsch (FT) wax substitute. In hot melt adhesives, it acts as a... view more

A-C® 325 by Honeywell is a high-density oxidized polyethylene homopolymer grade. Provides heat resistance to pressure-sensitive hot melt adhesives (HMAs). It improves adhesion to various substrates... view more

A-C® 330 by Honeywell is a high-density oxidized polyethylene homopolymer grade. Offers heat resistance to pressure-sensitive hot melt adhesives (HMAs). It improves adhesion to various substrates... view more

SYLVALITE™ RE 10L by KRATON acts as a tackifier. It is a low softening point ester of tall rosin with good stability and mild odor. It exhibits extra light color and excellent stability. It shows... view more