Corona™ 9 by Croda is skin-friendly, water in oil emulsion stabilizer that reduced tackiness. It is a scratch-resistant and anti-blocking additive. It prevents scarring on the surface, especially at... view more

Maxemul™ 5010 by Croda is a non-ionic, co-polymerizable surfactant for use as a stabilizer in latex binders typically used in pressure-sensitive adhesives. It is reactive towards vinylic unsaturated... view more

Zephrym™ PD 2246 by Croda is a polymeric dispersant. It offers enhanced dispersion viscosity and extended storage capability. It is recommended for both organic and inorganic pigments including... view more

Finntalc M15 by Elementis is floated, medium sized, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M30 by Elementis is floated, coarse, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M40 by Elementis is floated, coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. It is recommended for adhesives and polyester putties... view more

Finntalc M50 by Elementis is floated, very coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. Finntalc M50 is recommended for adhesives and polyester putties... view more

Finntalc M65 by Elementis is talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Versalink® P 250 by Evonik is a low-reactivity aromatic amines for use in polyurea or polyurea-polyurethane hybrid formulations. It can be blended with other liquid Versalink® curative products to... view more

Microcrystalline wax (100% by weight). It is a white to yellow colored solid. Insoluble in water and soluble in oil & organic solvents. Applications include hot melt adhesives, pipe wrapping tapes... view more

Microcrystalline wax (100% by weight). It is a white to yellow colored solid. Insoluble in water and soluble in oil & organic solvents. Applications include hot melt adhesives and sealants. Meets... view more

Kristalex™ 5140SD by Synthomer is a high softening point, low molecular weight hydrocarbon resin with low organic volatile content and low odor. It is made up of pure aromatic monomers. It is... view more

Pentalyn™ 750-HV-M by Synthomer acts as a tackifier having high molecular weight. Possesses very good reactivity to gelling agents, high viscosity and improved mineral oil solubility. Compatible... view more

Picco™ 5140 by Synthomer is a low molecular weight, non-polar hydrocarbon resin produced from petroleum derived aromatic monomers. It is brittle and possesses high softening point. Shows a good... view more

Picco™ 6100 by Synthomer is a non-polar, brittle aromatic hydrocarbon resin. Offers a good balance of tack, adhesion, flex and tear properties when compounded with an appropriate elastomer. Exhibits... view more