Escor™ AT 320 Molding by ExxonMobil Chemical is an ethylene acrylic acid copolymer. It acts as an adhesion promoter. It is used in heat-activated adhesive sealant compounds and in low temperature... view more

Rhenogran® CLD-80 by Lanxess is a non-staining sulphur donor for the vulcanization of natural and synthetic rubbers with additional thiuram accelerator for nitrile rubber seals. It is a blend of 80%... view more

Rhenogran® DPTT-70 by Lanxess is an ultra accelerator for vulcanization of natural and synthetic rubbers. It provides heat resistance in rubber seals, very rapid and scorch-safe vulcanization and... view more

Rhenogran® Diuron-80 by Lanxess is a crosslinking agent in oil-resistant seals based on acrylate rubber for use in vehicles and engineering. It is a blend of N'-(3,4-dichloro-phenyl)-N,N-dimethyl... view more

Rhenogran® MTT-80 by Lanxess is a vulcanization accelerator for chloroprene rubber in technical molded and extruded seals. It is a blend of 3-methyl-thiazolidine-thione-2, elastomer binder and... view more

Rhenogran® P91-40/NR by Lanxess is a blend of 40% aramid chopped fiber pulp, 60% elastomer binder (NR) and additives. It is used as a high-grade reinforcing material for sulfur- and peroxide-cured... view more

Blend of anionic microcrystalline / polyethylene wax emulsion. It offers slip resistance for adhesives and sealants... view more

Alcogum® 296-W by Nouryon is a high viscosity, anionic, aqueous solution of sodium polyacrylate. It acts as rheology modifier, stabilizer and surface active agent. It possesses adhesive, suspending... view more

Alcogum® ARM-II-135 by Nouryon is a ethanol-free/VOC-free synthetic polyacrylate. It acts as a rheology modifier. It provides stable viscosity over a broad pH range. It offers resistance to... view more

Alcogum® L-14 by Nouryon is a reactive, acidic, stable, milky-white and anionic latex emulsion. It acts as a thickener and forms a clear, viscous solution in addition with alkaline agents. It... view more

Pentalyn™ H-E is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. Possesses very good resistance to... view more

Regalite™ R1090 by Synthomer is a low molecular weight, fully hydrogenated, water-white, inert, hydrocarbon resin derived from petrochemical feedstocks. Designed as a tackifier in hot-melt adhesives... view more

Regalite™ R1100 is a low molecular weight, fully hydrogenated, inert thermoplastic resin derived from petrochemical feedstocks. Designed by Synthomer for use as a tackifier. Used in hot-melt... view more

Regalite™ R1125 by Synthomer is a low molecular weight, fully hydrogenated, inert thermoplastic resin derived from petrochemical feedstocks. Compatible with natural & synthetic rubbers, EVA, EBA... view more

Regalite™ S1100 Hydrocarbon Resin by Synthomer is a low molecular weight, fully hydrogenated thermoplastic resin derived from petrochemical feedstock. It is especially designed as a tackifier in... view more