Adhesion Resin EP 3350 by Evonik is a special purpose polyester resin of medium hardness for radiation curing systems. It is suitable for improving adhesion to critical substrates. Adhesion Resin EP... view more

Dynasylan® DAMO-T by Evonik is based on N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. It acts as an adhesion promoter and surface modifier. It provides improved flexural strength, tensile... view more

Dynasylan® SIVO 210 by Evonik is amino functional silane. Acts as an adhesion promoter and a surface modifier. Provides improvement in mechanical properties, for example flexural strength, tensile... view more

Dynasylan® VTEO by Evonik is a vinyltriethoxysilane grade. It functions as a surface modification, an adhesion promoter, and/or a crosslinking agent. It has the ability to absorb moisture. It offers... view more

Dynasylan® VTMO by Evonik is a vinyltrimethoxysilane-based moisture scavenger, surface modifier, crosslinking agent, and adhesion promoter. It improves abrasion resistance, chemical resistance, tear... view more

Primol™ 382 by ExxonMobil acts as a diluent. It is a purified blend of saturated hydrocarbon. It is obtained from petroleum through purification by catalytic hydrogenation. It provides very good... view more

UV-101 by Fujian Disheng Technology is a highly efficient UV absorber. It can effectively absorb 280-350 nm UV light. It is easily and homogeneously miscible with both polyester & polyether polyols and highly... view more

Vinyltrimethoxysilane. Used as crosslinker for polyethylene in one-stage2 graft polymerization. Copolymerizes with ethylene to form moisture cross-linkable polymers. Reacts slowly with water and... view more

D-60 by HUBEI BLUESKY NEW MATERIALS acts as a crosslinking- and drying agent. It is a highly reactive, titanium chelates complex. It is a blend of di (1,3- propanediol) bis(ethyl acetoacetate)... view more

D-62 acts as a drying and crosslinking agent by HUBEI BLUESKY NEW MATERIALS. It is a titanium chelates complex. The high reactivity of D-62 at low temperature enables it to react with common... view more

Hitac RA-13W by Hitac Adhesives and Coatings is polyurethane release agent (water-based). Provides effective release. Yields easy to moderate unwind adhesion. It is free of precipitation and gelation below ambient... view more

Hitac RA-15W by Hitac Adhesives and Coatings is polyurethane release agent. Yields easy to moderate unwind. Its release properties are virtually identical to carbamate PVODC. No heating needed for processing. Stable at... view more

Hitac RA-21S by Hitac Adhesives and Coatings is polyurethane release agent. Offers more consistent release and other significant improvements over other liquid release agents. It has high solids content with a lower... view more

ILCO PHOS 201 by ILCO Chemikalien is a combination of mono (2-methylpropyl)- and bis (2-methylpropyl)- phosphoric acid ester. It shows very effective antistatic- and wetting properties on low energy surfaces... view more

Polycondensed urethane solution in toluene/xylene. Used as a release agent for hot-melt and solvent based PSA tapes... view more

Special release agent in aromatic solvent solution, containing inorganic fillers. Gives a smooth mat surface once dried. Used for adhesive tapes based on treated PP or PE films coated with synthetic... view more

Synthetic polymer in xylene solution. Used as a release agent for adhesive tapes... view more

Solvent solution of a polyurethane release agent. Designed to be employed with polypropylene, polyethylene, PVC and polyester films... view more