Eastman Effusion™ Plasticizer is a non-phthalate, mild odor plasticizer by Eastman. Provides lower plastisol viscosity, excellent low temperature flexibility, and fusion rates similar to typical... view more

Proxel™ GXL by Arxada is a 20% aqueous dipropylene glycol solution of 1,2-benzisothiazolin-3-one. It is a biocide for the preservation of industrial water-based products against spoilage from... view more

Drewplus® T-3200 by Ashland Specialty Chemical is a defoamer or foam control agent. It is formulated without the use of alkylphenolethoxylates (APEO), and are available in a variety of... view more

High performance, non-ionic formulation of silica derivatives, paraffinic oil, esters and water. Used as a foam control agent for water-based systems such as pressure sensitive adhesives and... view more

Drewplus® TW-4501 by Ashland is a foam control agent for water-based systems. It is a high performance, non-ionic formulation of silica- and wax derivatives and mineral oil. It offers very good... view more

Protectol™ GA 50 by BASF is a biocide that acts as a preservative and disinfectant. Used in adhesives. It acts as an antimicrobial agent... view more

NeoRez® R-9621 by Covestro is an aliphatic polyester waterborne urethane for use in industrial laminating adhesives requiring a low VOC. Has good adhesion to vinyl, polyester and low-density... view more

DAPRO® DF 21 by Elementis is a blend of hydrophobic silica, emulsifiers and mineral oil. Acts as a defoamer readily dispersible in water. Suitable for water-borne adhesives. Typically used at... view more

DAPRO® DF 420 by Elementis is a water dispersible, non-explosive defoamer. Exhibits excellent persistence and compatibility. Suitable for aqueous adhesives. Complies with REACH, TSCA, EINECS, DSL... view more

Defom W-086 by Elementis is a hydrocarbon based waterborne defoamer. It is mixture of mineral oil and hydrophobic particle. It exhibits excellent antifoaming, defoaming and compatibility. It is... view more

RHEOLATE® 175 rheological additive by Elementis is a low viscosity, easy-to-use hydrophobically modified alkali-swellable emulsion (HASE). It is APEO (alkyl phenol ethoxylate)- and solvent- free... view more

Esacure KIP 75 LT by IGM Resins acts as a photoinitiator. It is a liquid mixture of oligomeric alpha-hydroxy ketone and tripropylene glycol. It offers high reactivity, non-yellowing properties and low... view more

Omnirad 2100 by IGM Resins acts as a free-radical type I photoinitiator. It is a highly efficient liquid curing agent to initiate radical polymerization of acrylates and unsaturated polyesters after... view more

Omnirad 4265 by IGM Resins is a waterborne, highly effective liquid photoinitiator blend. Used for UV-polymerisation of suitable resins. It offers good compatibility with most organic solvents and... view more

Omnirad 500 by IGM Resins is a highly effective liquid photo-initiator for UV polymerization of suitable resins. It provides through and surface cure. It is designed for clear-, white- and pigmented... view more

Omnirad 81 by IGM Resins is an eutectic photoinitiator. It is a blend of benzophenone and 4-Methylbenzophenone. It exhibits excellent solubility properties. It is an ideal photo-catalyst for UV... view more