Dynasylan® 1122 by Evonik is bis(3-triethoxysilylpropyl)amine-based adhesion promoter and surface modifier. This secondary aminosilane provides good flexural strength, tensile strength, impact... view more

Dynasylan® 1124 by Evonik acts as an adhesion promoter and surface modifier with excellent crosslinking properties. It is a secondary aminofunctional methoxy-silane possessing two symmetric silicon... view more

Dynasylan® 1189 by Evonik is a bifunctional silane. Acts as an adhesion promoter or as a surface modifier. Provides flexural strength, tensile strength, impact strength, modulus of elasticity... view more

Dynasylan® AMMO by Evonik is a 3-Aminopropyltrimethoxysilane grade. Acts as an adhesion promoter and a surface modifier. Exhibits corrosion resistance and improved electrical properties like... view more

Dynasylan® DAMO by Evonik is based on N-2-Aminoethyl-3-aminopropyltrimethoxysilane. Acts as an adhesion promoter. Offers improved flexural strength, tensile strength, impact strength and modulus of... view more

Aliphatic diamine. Has low reactivity and viscosity as well as highly compatible diamine chemistry. Used in caulks and sealants... view more

Vanquish™ 100 by Arxada is a neat active liquid without carriers. Offers antimicrobial activity against fungi, yeasts and bacteria. Vanquish™ 100 can be used in sealants, adhesives, caulks and... view more

Vanquish™ DOP by Arxada is an antimicrobial agent against fungi, yeasts and bacteria. It is an active ingredient formulation in a dioctyl phthalate carrier. Vanquish™ DOP is used in sealants... view more

Vanquish™ ESBO by Arxada is an active ingredient formulation in an epoxidized soya bean oil carrier. It is used in applications where the customer requires phthalate-free carriers. It offers... view more

DSX 1550 by BASF is a non-ionic polyurethane polymer. Used as a rheology modifier for waterborne systems and putties. Provides thickening and modification of flow properties of waterborne polymers... view more

Lupragen® N 106 by BASF acts as catalyst. It is soluble in water and hygroscopic in nature. Lupragen® N 106 is used for polyurethane adhesives and sealants... view more

Tyzor® 131 by Dorf Ketal is a pale-yellow solution of a chelate of titanium in water. Acts as a very good crosslinking agent. It is not affected by freezing. It is used as an additive in... view more

Clear to slightly hazy, colorless to pale yellow aqueous sodium zirconium glycolate. Used as an additive in polyurethane adhesives and sealants. Can be used as a very good crosslinking agent in... view more

Tyzor® NPZ by Dorf Ketal is yellowish brown, flammable, highly reactive zirconium tetra-n-propanolate. Possesses high sensitivity to moisture. Used as an additive in polyurethane adhesives and... view more

Tyzor® OGT by Dorf Ketal is a colorless to yellowish, flammable, highly reactive octyleneglycol titanate with 100 % active content. Possesses high sensitivity to moisture. Used as an additive in... view more

Dioctyltin Mercaptide catalyst used for water-blown urethane elastomers or foams blown with alternate blowing agents including the pentanes. Can also be used for preparation of one-shot or... view more