Benzoflex™ 352 plasticizer by Eastman is a white flake solid plasticizer. Designed for hot-melt adhesives and sealants. All components of Benzoflex™ 352 plasticizer are listed in TSCA, DSL, CEPA... view more

acResin® ZeroPCF A 204 UV by BASF is an UV cross-linkable, biocides-, MOSH-, MOAH- & solvent-free, high-performance acrylic hot-melt polymer. Exhibits very good shear-, good- tack & peel properties, excellent... view more

Corona™ 9 by Croda is skin-friendly, water in oil emulsion stabilizer that reduced tackiness. It is a scratch-resistant and anti-blocking additive. It prevents scarring on the surface, especially at... view more

Maxemul™ 5010 by Croda is a non-ionic, co-polymerizable surfactant for use as a stabilizer in latex binders typically used in pressure-sensitive adhesives. It is reactive towards vinylic unsaturated... view more

Zephrym™ PD 2246 by Croda is a polymeric dispersant. It offers enhanced dispersion viscosity and extended storage capability. It is recommended for both organic and inorganic pigments including... view more

Finntalc M15 by Elementis is floated, medium sized, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M30 by Elementis is floated, coarse, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M40 by Elementis is floated, coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. It is recommended for adhesives and polyester putties... view more

Finntalc M50 by Elementis is floated, very coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. Finntalc M50 is recommended for adhesives and polyester putties... view more

Finntalc M65 by Elementis is talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Carbowet® 144 by Evonik is a non-ionic wetting additive that provides additional dispersing properties. It is a 100% active and low viscous liquid. It offers fast pigment and substrate wetting... view more

Surfynol® 104 by Evonik is a multi-functional surfactant and wetting agent. It is used in water-borne carpet backing adhesives and pressure sensitive adhesives. It offers benefits such as reduced... view more

Versalink® P 250 by Evonik is a low-reactivity aromatic amines for use in polyurea or polyurea-polyurethane hybrid formulations. It can be blended with other liquid Versalink® curative products to... view more

Jeffamine® M-2095 Amine by Huntsman is polyethylene glycol (PEG)-based polyetheramine. It is a hydrophilic polyether monoamine of approximately 2000 molecular weight. Exhibits moderate viscosity... view more

Jeffamine® M-3085 Amine by Huntsman is a hydrophilic polyether monoamine of approximately 3000 molecular weight with a PO/EO mole ratio of about 8/58. Exhibits moderate viscosity and low vapor... view more

Omnicat 270 by IGM Resins is a heavymetal-free, high-molecular-weight, sulfonium salt-based photo initiator. It is recommended for the cationic polymerization of formulations based on epoxies or... view more

Omnirad 4MBZ Flakes by IGM Resins is an effective Type II photoinitiator. Used in combination with tertiary amine synergists to initiate radical polymerization of unsaturated oligomers such as acrylates after... view more

Omnirad EDB by IGM Resins is a highly efficient tertiary amine synergist. It is used in conjunction with type II photoinitiator. It generates free radicals that initiate radical polymerization of... view more

Omnirad TPO by IGM Resins is a highly efficient, low yellowing, free-radical type 1 photoinitiator. Used to initiate radical polymerization of unsaturated oligomers like acrylates, after exposure to... view more

KRATON™ G1650 ES by KRATON is a linear triblock copolymer based on styrene and ethylene/butylene with bound styrene of 29.2% mass. It is supplied as fluffy crumb dusted with amorphous silica... view more