Priplast™ 3294 by Cargill is a semi-crystalline, bio-based polyester polyol. It offers excellent water resistance, superior surface hardness and outstanding mechanical properties. Exhibits good... view more

Behenyl Acrylate 1822 (BEA 1822) by BASF is a mixture of C18, C20 and C22 acrylates. It is a monofunctional monomer with a long hydrophobic side chain pendant group. It imparts flexibility, impact... view more

Behenyl Acrylate 1822 F (BEA 1822 F) by BASF is behenyl acrylate (acrylic acid ester). It provides low shrinkage, hydrophobicity and weatherability to polymers. Forms homopolymers and copolymers... view more

Behenyl Methacrylate 1822 F (BEMA 1822 F) by BASF is a mixture of C18, C20 and C22 methacrylates. It is a low volatility, monofunctional monomer with a long, hydrophobic side chain. Forms... view more

Joncryl® 581 by BASF is high solid acrylic polyol. Offers good chemical resistance and hardness. Used in adhesives... view more

Joncryl® 587 by BASF is workhorse acrylic polyol. Offers very fast dry with long pot life. Possesses very good UV- and chemical- resistance. Provides cost benefit and formulator versatility... view more

BLACK PEARLS® 570 by Cabot is a specialty carbon black. It exhibits good coloration and covering power. It provides higher levels of jetness in comparison to Cabot’s BLACK PEARLS® 430 and BLACK... view more

Corona™ 9 by Croda is skin-friendly, water in oil emulsion stabilizer that reduced tackiness. It is a scratch-resistant and anti-blocking additive. It prevents scarring on the surface, especially at... view more

Maxemul™ 5010 by Croda is a non-ionic, co-polymerizable surfactant for use as a stabilizer in latex binders typically used in pressure-sensitive adhesives. It is reactive towards vinylic unsaturated... view more

Zephrym™ PD 2246 by Croda is a polymeric dispersant. It offers enhanced dispersion viscosity and extended storage capability. It is recommended for both organic and inorganic pigments including... view more

Finntalc M15 by Elementis is floated, medium sized, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M30 by Elementis is floated, coarse, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M40 by Elementis is floated, coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. It is recommended for adhesives and polyester putties... view more

Finntalc M50 by Elementis is floated, very coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. Finntalc M50 is recommended for adhesives and polyester putties... view more