Dispex® Ultra FA 4431 (Old name: Efka® 6230) by BASF is aliphatic polyether with acidic groups. Acts as a dispersing agent. Offers benefits such as reduced grinding and dispersion time, increased... view more

Tinuvin® 384-2 by BASF is a blend of benzenepropanoic acid, 3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxy-, C7-9-branched and linear alkyl esters and 1-methoxy-2-propyl acetate. Acts as... view more

Tinuvin® 99-2 by BASF is a blend of benzenepropanoic acid, 3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxy-, C7-9-branched & linear alkyl esters and 1-methoxy-2-propyl acetate. Used in... view more

Synergistic combination of 3 liquid antioxidants dispersed in water. Can be added to elastomers/resins dispersions. Provides high temperature protection. Offers a wide stabilisation spectrum to the... view more

Milk white emulsion of liquid stabilizers in water with some presence of toluene in order to be easily added to elastomers/resins dispersions. Provides high temperature protection. Offers a wide... view more

Dolmix range by Imerys is a dolomite. It offers cost-effectiveness, high whiteness, hardness and acid resistance. It is used in PVA/starch/dextrin adhesives for packaging, hot-melt adhesives for... view more

Dolplast range by Imerys is a cost-effective dolomite. It provides high whiteness, hardness and acid resistance. It is used in PVA/starch/dextrin adhesives for packaging, hot-melt adhesives for... view more

Queensfil™ 25 by Imerys is a cost-effective, fine ground calcium carbonate. It offers increased rheological properties and reduced water or volatile content. It is designed for silicone & hybrid... view more

K-FLEX® 500 by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, general-purpose, polar plasticizer. It is a blend of di-propylene glycol dibenzoate and diethylene glycol dibenzoate... view more

K-FLEX® 850S by LANXESS (previously Emerald Kalama Chemical) is non-phthalate, low-VOC plasticizer. It is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate. It achieves... view more

Alcogum® ARM-II-135 by Nouryon is a ethanol-free/VOC-free synthetic polyacrylate. It acts as a rheology modifier. It provides stable viscosity over a broad pH range. It offers resistance to... view more

Phenol-modified indene-coumarone-resin. Used as a tackifier in water and solvent based adhesives. Increases initial tack, peel and shear strength. Inhibits the tendency of natural resins to... view more

Phenol-modified indene-coumarone-resin. Used as a tackifier in water and solvent based adhesives. Increases initial tack, peel and shear strength. Inhibits the tendency of natural resins to... view more

Phenol-modified indene-coumarone-resin. Used as a tackifier in water and solvent based adhesives. Increases initial tack, peel and shear strength. Inhibits the tendency of natural resins to... view more

Metalyn™ 200 is a tackifier by Synthomer. It is a resinous plasticizer derived from rosin. Exhibits low vapor pressure, excellent surface wetting and adhesion properties. It is alcohol-soluble and... view more

Pentalyn™ H-E is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. Possesses very good resistance to... view more

Permalyn™ 496-M by Synthomer is a tackifier. It is a pale, medium-hard, thermoplastic glycerol ester of gum rosin with low acidity. It is produced by means of a steam stripping process that yields a... view more