Finntalc M30 by Elementis is floated, coarse, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M40 by Elementis is floated, coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. It is recommended for adhesives and polyester putties... view more

Finntalc M40LV by Elementis is a functional extender-based on hydrated magnesium silicate. It is a pure, lamellar, coarse particle size talc, exhibiting stable color, very hydrophobicity, inertness, and... view more

Finntalc M50 by Elementis is floated, very coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. Finntalc M50 is recommended for adhesives and polyester putties... view more

Finntalc M50LV by Elementis is a functional extender-based on hydrated magnesium silicate. It is a pure, lamellar, coarse particle size talc, exhibiting stable color, high hydrophobicity, inertness, and... view more

Amicure® 101 by Evonik is a non-MDA aromatic amine. It is used in heat-cured adhesives. It acts as a curing agent. It possesses non-staining properties. It offers benefits such as good handling... view more

Amicure® CG-1200G by Evonik is a micronized grade of dicyandiamide. It contains 0.5% of an inert flow control additive to inhibit clumping and improve handling. It acts as a latent curing agent. Its... view more

AMICURE® CG-325 by Evonik is a pulverized grade of dicyandiamide. It offers benefits such as enhanced reactivity, improved product consistency and reduced clumping. AMICURE® CG-325 is used as a curing agent... view more

Amicure® CG-325G is a micronized grade of dicyandiamide. It acts as a latent curing agent. Its fine particle size provides enhanced reactivity than coarser grades. It contains 1.5% of an inert flow... view more

Amicure® CG-NA by Evonik is an unpulverized grade of dicyandiamide. It is designed for use as a latent curing agent for epoxy resins in solvent-based processes. Amicure® CG-NA is suitable for... view more