Dibutyltin diacetate. Acts as a catalyst for polyurethane and silicone systems and for esterification reactions... view more

Foamdoctor G2967 by PennWhite is a mixture of mineral oil and non ionic surfactants. Acts as foam control agent. It disperses to a fine emulsion. It has shelf life of 12 months in unopened containers and... view more

Foamdoctor G2968 by PennWhite is a non-ionic surfactants in hydrophobic polyol. Acts as foam control agent. It is based on a mixture of mineral oil and non ionic surfactants. It is effective over a wide... view more

Foamdoctor G2970 by PennWhite is a mixture of mineral oil and non-ionic surfactants. Acts as foam control agent. It is effective over a wide pH range and retains a high as well as long lasting efficiency... view more

Foamdoctor G2975 by PennWhite is a non-ionic surfactants in hydrophobic polyol. Acts as foam control agent. It is based on a blend of polyether and non ionic surfactants. It is mineral hydrocarbon free... view more

Mixture of mineral oil and non-ionic surfactants. Acts as foam control agent. Stable over a wide temperature and pH range with a long lasting efficiency. Foamdoctor G2988 has shelf life of 12 months... view more

Tetrahydrofurfuryl alcohol. Acts as a low cost, biodegradable solvent. It is water-miscible liquid having very low odor. Has low vapor pressure/low evaporation rate, high solvency for active... view more

PURETOL™ 11D by Petro-Canada Lubricants is a white mineral oil (100%). It acts as a plasticizer. PURETOL™ 11D is used in hot melt and pressure sensitive adhesives. It meets USP/NF, FDA 21 CFR... view more

PURETOL™ 22D by Petro-Canada Lubricants acts as a plasticizer. It is a high purity, colorless & odorless, white mineral oil (100%). It is used in hot melt and pressure sensitive adhesives. It meets... view more

PURETOL™ 350D by Petro-Canada Lubricants is a (100%) white mineral oil-based plasticizer. It is used in hot melt and pressure sensitive adhesives. PURETOL™ 350D meets USP/NF, FDA 21 CFR 172.878, FDA... view more

PURETOL™ 380D by Petro-Canada Lubricants is a white mineral oil (100%). It acts as a plasticizer. It is used in hot melt and pressure sensitive adhesives. It meets USP/NF, FDA 21 CFR 172.878, FDA 21... view more

PURETOL™ 550D by Petro-Canada Lubricants is a white mineral oil (100%) for use in hot melt and pressure sensitive adhesives. It acts as a plasticizer. It meets USP/NF, FDA 21 CFR 172.878, FDA 21 CFR... view more

Polyol derived from butadiene terminated with hydroxyl groups. Contains allylic hydrogens allowing grafting by free radicals with vinyl monomers. Possesses low humidity content and do not need to be... view more

Calfax® 16L-35 by Pilot Chemical is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate. It offers superior solubility and stability in electrolyte solutions such as brine, bleach... view more

Calfax® DB-45 by Pilot Chemical is Sodium Dodecyl Diphenyl Oxide Disulfonate. It is an excellent emulsifier. It contains no halogenated solvents and is compatible with a broad range of acids... view more

Calfoam® EA-303 by Pilot Chemical is an ammonium lauryl ether sulfate containing an average of 3 moles of ethylene oxide. Acts as a surfactant. It is a light colored liquid of medium viscosity... view more

Calimulse® AOS by Pilot Chemical is a 40% active sodium C14-16 alpha olefin sulfonate. It is a clear anionic surfactant with good economical emulsification and wetting properties. It is free of... view more

Calimulse® EM-22 by Pilot Chemical is a 22% active sodium branched alkyl benzene sulfonate. It is an effective emulsifier which produces stable emulsions. It also has great wetting and handling... view more

POLARIS II by Pinopine is a triethylene glycol ester of gum rosin. It is used as a tackifier. It is a light-yellow viscous liquid with excellent tack. It shows good compatibility with natural &... view more

POLARIS III by Pinopine is a triethylene glycol ester of gum rosin. It is used as a tackifier. It shows good compatibility with natural & synthetic rubber, EVA polymer, wax and aliphatic hydrocarbon... view more

POLARIS IV by Pinopine is a very low VOC and SVOC triethylene glycol ester of gum rosin. It shows good compatibility with natural & synthetic rubber, EVA polymer, wax and aliphatic hydrocarbon... view more

POLARIS V by Pinopine is a triethylene glycol ester of gum rosin. It is used as a tackifier. It shows good compatibility with natural & synthetic rubber, EVA polymer, wax and aliphatic hydrocarbon... view more

POLARIS VII by Pinopine is low VOC triethylene glycol ester of gum rosin without oxidative drying fatty acid. It is used as a tackifier. It provides low viscosity. POLARIS VII is recommended for... view more

Abalyn® by Pinova (DRT) is a methyl ester of rosin. Acts as a plasticizer, tackifier and wetting agent. It is an amber-colored, near neutral, tacky, viscous liquid. Has good thermal stability and... view more

Polyterpene resin, produced from high purity alpha-pinene isolated from turpentine. Acts as a plasticizer and a tackifier. It is a pale, inert, low molecular weight resin. It is characterized by its... view more

Staybelite® Ester 3 by Pinova is a triethylene glycol ester of partially hydrogenated wood rosin. Acts as a tackifier and plasticizer. It is a pale, viscous, balsamic liquid with resistance to... view more

AXCIDE BIT-20 by Planet Chemicals is a 1,2-benzisothiazolin-3-one grade. This grade is a low-toxicity biocide prepared in propylene glycol/glycerine solution for protection against microorganisms in... view more

AXCIDE BIT-33 is a 1,2-benzisothiazolin-3-one grade by Planet Chemicals. This grade is a low-toxicity biocide prepared in glycol solution for protection against microorganisms in wet state. It has a... view more

4, 5-Dichloro-2-n-octyl-isothiazolin-3-one. Acts as a biocide as well as dry-film mildew protector. It easily incorporates into water-based or solvent-based formulations. Offers good stability with... view more

4, 5-Dichloro-2-n-octyl-isothiazolin-3-one. Acts as a biocide as well as dry-film mildew protector. It easily incorporates into water-based or solvent-based formulations. Offers good stability with... view more

Zinc pyrithione or bis (2-pyridylthio) zinc 1, 1’-dioxide. Acts as a low toxicity biocide liquid as well as anti-fouling agent. It shows good stability as bactericide and fungicide in the pH range... view more

Dioctyl phthalate. Acts as a plasticizer. This ester is produced from the reaction of phthalic anhydride with 2-ethylhexanol. It cannot be extracted with water and can be mixed with all monomers for... view more

Potassium soap of gum rosin. It is derived from catalytic disproportionation of gum rosin. Possesses compatibility with synthetic rubber (SBR)... view more

Potassium soap of gum rosin. It is derived from catalytic disproportionation of gum rosin. Possesses compatibility with synthetic rubber (SBR)... view more

Potassium soap of gum rosin. It is derived from catalytic disproportionation of gum rosin. Possesses compatibility with synthetic rubber (SBR)... view more

Rheology modifier. Used as a flow control agent in a wide range of pigmented vehicles, oils, varnishes, alkyds, alkyd/amino systems, esters, polyurethane’s, cellulosic and acrylic lacquers... view more

PZE-1000 by PolyAziridine Global is an ethylene imine based tri-functional polyaziridine grade. Acts as a crosslinking agent. Exhibits an amine-like odor and a high level of functionality that... view more

PZP-1000 by PolyAziridine Global is propylene imine-based, tri-functional polyaziridine grade with an amine-like odor. It acts as a crosslinking agent. The aziridine end groups can react with active... view more

Si-PolyU 2550 by PolyU is an apolar, moderately viscous, silane-modified hybrid polymer. It has a polypropylene oxide-backbone terminated with trimethoxysilyl groups. It is used as a reactive... view more

Si-PolyU 4020 by PolyU is a highly efficient, allergens- & nanomaterials-free, moderately viscous, low polar, silane-modified polymer which has a polypropylene oxide-backbone, terminated with... view more

Si-PolyU 5013 by PolyU is a highly efficient, allergens- & nanomaterials-free, moderately viscous, low polar, silane-modified polymer which has a polypropylene oxide-backbone, terminated with... view more

Polimix® 100F by Polynt is a low viscosity, polymeric plasticizer based on adipic acid and polyhydric alcohols. It offers permanence, low tendency to migration and low volatility. It provides... view more

Polimix® 150N by Polynt is a polymeric plasticizer of low molecular weight based on adipic acid and polyhydric alcohols. Used for labels and adhesives sheets for advertisement graphics, furnishings... view more

Polymeric plasticizer based on adipic acid and polyhydric alcohols. Used in adhesive labels and electical adhesive tapes. Offers low viscosity, interesting processing properties, permanence, low... view more

Polimix® 200F by Polynt is a medium-low viscosity polymeric plasticizer based on adipic acid and polyhydric alcohols. It provides extraction resistance by oils, fats and hydrocarbons. It offers good... view more

Polymeric plasticizer based on adipic acid and polyhydric alcohols. Used in adhesive labels and electical adhesive tapes. Offers medium viscosity, interesting processing properties, permanence, low... view more

PC 1100 Silane by AB Specialty Silicones is a versatile aminopropyltriethoxysilane. Used as coupling agent and adhesion promoter for adhesives and sealants. Provides strong bonding, good magnetic... view more

Gamma-aminopropyltrimethoxysilane. Used as adhesion promoter for adhesives and sealants. Gives an improvement in the bond between a substrate, filler or reinforcement and resins that react with the... view more

Colorless N-beta-(aminoethyl)-gamma-aminopropyl-methyldimethoxysilane. Possesses sensitivity to hydrolysis. Used as coupling agent and adhesion promoter in adhesives and sealants. Provides good... view more

PC 4100 Silane by Power Chemical is a light and heat sensitive gamma-methacryl-oxypropyl-trimethoxysilane. Used as an adhesion promoter at organic/inorganic interfaces, as surface modifier, as... view more

Bis[(3-triethoxysilyl)propyl]amine. It acts as coupling agent and adhesion promoter between inorganic materials and organic polymers. It is a yellowish liquid with amine like odor. It also behaves... view more