Cardolite® LITE 3040 is a solvent free, low viscosity phenalkamide epoxy curing agent by Cardolite. Exhibits excellent mechanical properties and excellent adhesion. Provides outstanding durability... view more

Cardolite® NX-5594 is a phenalkamine epoxy curing agent that has favorable labeling, faster cure at low temperature, i.e. 0°C. Utilized as a solvent free hardener for epoxy adhesives and as a... view more

Cardolite® GX-3090 is a solvent free and very low viscosity phenalkamide epoxy curing agent. Exhibits excellent mechanical properties, faster strength development, and good adhesion at recommended... view more

Cardolite® LITE 2001 is a solvent-free, light color phenalkamine epoxy curing agent with high bio-content. It is very similar in performance to Cardolite® NC-541, it has excellent rapid cure... view more

Cardolite® LITE 2001LV is a solvent-free, low viscosity, light color phenalkamine epoxy curing agent with high bio-content. Like the darker colored Cardolite® NC-541LV, this product has fast cure... view more

Dynasylan® SIVO 203 by Evonik is a multifunctional aminosilane compound. Acts as an adhesion promoter. Provides improved product performance and quality. It is soluble in alcohols, aliphatic and... view more

Dynasylan® 1122 by Evonik is bis(3-triethoxysilylpropyl)amine-based adhesion promoter and surface modifier. This secondary aminosilane provides good flexural strength, tensile strength, impact... view more

Dynasylan® 1124 by Evonik acts as an adhesion promoter and surface modifier with excellent crosslinking properties. It is a secondary aminofunctional methoxy-silane possessing two symmetric silicon... view more

Dynasylan® 1146 by Evonik is a diaminofunctional silane-based adhesion promoter. It exhibits very good wetting on substrates and forms weather-, heat-damp- and moisture-resistant bonds to substrates... view more

Dynasylan® 1189 by Evonik is a bifunctional silane. Acts as an adhesion promoter or as a surface modifier. Provides flexural strength, tensile strength, impact strength, modulus of elasticity... view more

Argirec™ B24 by Imerys is a sedimentary kaolinite. It offers good viscosity stability over time and color match for the test liner substrate. It is recommended for lamination & water-based... view more

Aspect® 4000 by Imerys is a fine, high aspect ratio wollastonite mineral. It is used for bonding applications, such as structural adhesives. It is recommended for plastisols, sealants which are... view more

ImerCarb® 20S by Imerys is a surface-treated, high brightness, coated ground calcium carbonate (CGCC) which is produced from high quality crystalline marble. It provides good compatibility with the... view more

ImerSeal® 36S by Imerys is a coated ground calcium carbonate (CGCC). It provides good adhesion properties and improved tensile strength & elongation at break while keeping low viscosity and low... view more

ImerSeal® 48S by Imerys is a coated ground calcium carbonate (CGCC). It provides good adhesion properties and improved tensile & elongation at break while keeping low viscosity and low modulus. It... view more