High performance, non-ionic formulation of silica derivatives, paraffinic oil, esters and water. Used as a foam control agent for water-based systems such as pressure sensitive adhesives and... view more

ECO Brij™ C20 by Croda is a 100% bio-based, high HLB, non-ionic surfactant. It is used as a versatile emulsifier for O/W emulsions and aqueous wetting & dispersing agent. It is produced from... view more

ECO Brij™ L4 by Croda is a 100% bio-based, non-ionic surfactant. It is produced from naturally occurring straight chain lauryl alcohol. This hydrolytically stable grade is used as a versatile &... view more

ECO Brij™ S10 by Croda is a 100% bio-based, low HLB, non-ionic surfactant. It is also used as a versatile co-emulsifier for O/W emulsions and wetting & dispersing agent. This hydrolytically stable... view more

ECO Brij™ S721 by Croda is a 100% bio-based, high HLB, non-ionic surfactant. It is produced from naturally occurring straight chain stearyl alcohol. This additive is also used as a versatile... view more

Maxemul™ 5010 by Croda is a non-ionic, co-polymerizable surfactant for use as a stabilizer in latex binders typically used in pressure-sensitive adhesives. It is reactive towards vinylic unsaturated... view more

Eastman™ Butyl Acetate by Eastman is a readily biodegradable, medium boiling ester solvent. It offers good solvent activity, high electrical resistance and low MIR value, surface tension and water solubility... view more

Silcolease® PC-195 NXL by Elkem Silicones is a biocompatible polyaddition silicone emulsion. Acts as a release modifier. Offers incremental levels release, good cures with low levels of extractable... view more

Escor™ AT 310 Blown by ExxonMobil Chemical is an acid terpolymer. It acts as an adhesion promoter and as heat seal layer... view more

Escor™ AT 310 Cast by ExxonMobil Chemical is an acid terpolymer. It acts as an adhesion promoter and as heat seal layer... view more

Escor™ AT 310 ExCo by ExxonMobil Chemical is an acid terpolymer. It acts as an adhesion promoter. It is used in demanding heat seals and shows very good adhesion properties. Escor™ AT 310 ExCo... view more

Escor™ AT 310 Molding by ExxonMobil Chemical is an ethylene acrylic acid copolymer resin. It acts as an adhesion promoter. It is used in heat-activated adhesive and sealant compounds. It possesses... view more

Escor™ AT 320 Blown by ExxonMobil Chemical is an ethylene methyl acrylate copolymer. It acts as an adhesion promoter and as a heat seal layer... view more

Polyester adipate. Acts as a polymeric plasticizer. It is highly efficient and very easy processing. Compatible with acrylic resins, nitrile, nitrocellulose, polymethyl methacrylate, polyvinyl... view more

Jeffamine® M-2095 Amine by Huntsman is polyethylene glycol (PEG)-based polyetheramine. It is a hydrophilic polyether monoamine of approximately 2000 molecular weight. Exhibits moderate viscosity... view more

Jeffamine® M-3085 Amine by Huntsman is a hydrophilic polyether monoamine of approximately 3000 molecular weight with a PO/EO mole ratio of about 8/58. Exhibits moderate viscosity and low vapor... view more

Esacure 1001 M by IGM Resins is a difunctional Type II photoinitiator of the ketosulphone class. It is used to initiate radical polymerization of unsaturated oligomers such as acrylates after UV... view more

Omnirad 184 by IGM Resins is a highly efficient, non-yellowing photoinitiator. It is used to initiate the photo-polymerization of chemically unsaturated prepolymers like acrylates, in combination with... view more

Omnirad 4MBZ Flakes by IGM Resins is an effective Type II photoinitiator. Used in combination with tertiary amine synergists to initiate radical polymerization of unsaturated oligomers such as acrylates after... view more

Omnirad 907 by IGM Resins is a highly efficient photoinitiator. It is 2-methyl-1[4-(methylthio)phenyl]-2-morpholinopropan-1-one. It is used to initiate the photo polymerization of unsaturated... view more

Omnirad BDK by IGM Resins is a highly efficient type I photoinitiator. It is used to initiate radical polymerization of unsaturated oligomers such as acrylates after exposure to UV light. It can be... view more

K-FLEX® 500 by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, general-purpose, polar plasticizer. It is a blend of di-propylene glycol dibenzoate and diethylene glycol dibenzoate... view more

K-FLEX® 850P by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, plasticizer. It is a blend of dipropylene glycol- and diethylene glycol dibenzoate. It is similar in composition to... view more

K-FLEX® 850S by LANXESS (previously Emerald Kalama Chemical) is non-phthalate, low-VOC plasticizer. It is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate. It achieves... view more

K-FLEX® 975P by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, low vapor pressure-VOC plasticizer. It is a blend of diethylene glycol-, dipropylene glycol- and propylene glycol... view more

K-FLEX® DP by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, plasticizer. It is dipropylene glycol dibenzoate. It is the most versatile polar, high solvating grade. It offers good... view more

Alcogum® 1370 by Nouryon is a sodium polyacrylate gum thickener. It is used to viscosify waterborne compounds in a variety of applications. It provides stable viscosity over a broad pH range. It... view more

Alcogum® 296-W by Nouryon is a high viscosity, anionic, aqueous solution of sodium polyacrylate. It acts as rheology modifier, stabilizer and surface active agent. It possesses adhesive, suspending... view more

Alcogum® 6940 by Nouryon is a sodium polyacrylate rheology modifier. It provides stable viscosity over a broad pH range. It offers resistance to biological degradation. It is used to thicken... view more

Alcogum® 9710 by is a sodium polyacrylate. It acts as a thickener and viscosifier. It provides stable viscosity over a broad pH range. It offers resistance to biological degradation. It is used to... view more

Alcogum® AN-10 by Nouryon is a sodium polyacrylate rheology modifier and viscosifier. It provides stable viscosity over a broad pH range. It offers resistance to biological degradation. It is used... view more

Capric Acid Methyl Ester. Acts as an active solvent and evaporation retarder. It is a biodegradable, HAP-free oleochemical ester obtained from palm kernel oil. Has excellent solvency power and low... view more

Abex® 2005 by Syensqo is a specially formulated, APEO- & formaldehyde-free surfactant. It acts as a primary anionic emulsifier for making extremely small particles in all acrylic and styrene... view more

Abex® 2020 by Syensqo is an APEO-free emulsifier, specially formulated with anionic and non-ionic surfactant. Provides excellent particle size (=/<100 nm) control and exceptional clean reaction... view more

Abex® 2515 by Syensqo is an APE-free, non-ionic, user-friendly & easy to handle surfactant. It provides pre-monomer emulsion stability and grit formation reduction along with mechanical... view more

Abex® 2525/40 by Syensqo is an APE-free, non-ionic surfactant. It offers pre-monomer emulsion stability, grit formation reduction as well as mechanical-, freeze thaw and chemical stability. Abex® 2525/40... view more

Abex® 2535 by Syensqo is an APE-free, non-ionic surfactant. Offers reduction in grit formation, excellent chemical stability, pre-monomer emulsion stability and improved mechanical-, calcium- &... view more