Dynasylan® 1124 by Evonik acts as an adhesion promoter and surface modifier with excellent crosslinking properties. It is a secondary aminofunctional methoxy-silane possessing two symmetric silicon... view more

Dynasylan® 1189 by Evonik is a bifunctional silane. Acts as an adhesion promoter or as a surface modifier. Provides flexural strength, tensile strength, impact strength, modulus of elasticity... view more

TEGOPAC® RD 1 by Evonik is a silane-modified polymer used to decrease viscosity of adhesives & sealant formulations. It acts as a cross-linker which releases ethanol during the curing process. It... view more

TEGOPAC® Bond 170 by Evonik is a silylated polymer used for producing neutral curing adhesives and sealants with PPG as the backbone polymer. Applications include liquid membranes (for roofing... view more

TEGOPAC® RD 2 by Evonik is a silane-modified polymer. It acts as a cross-linker which releases ethanol during the curing process with a high cross-linking density: in combination with a co-binder a... view more

Polymer ST 48 by Evonik is a phthalate plasticizer-based, silane-terminated polymer. It offers a good handling viscosity and is therefore easy to apply manually. It exhibits excellent adhesion to... view more

Polymer ST 81 by Evonik is a plasticizer-free, silane-terminated polymer. It offers high tensile strength combined with exceptional surface hardness after curing. It allows the formulation of both... view more

TEGOPAC® Bond 160 by Evonik is a silylated polymer used for producing neutral curing adhesives and sealants where low formulation viscosity or very high filler load is required. Applications include... view more

TEGOPAC® Bond 251 by Evonik is a silane modified hybrid polymer with a modified backbone that contains hydrophilic segments and lateral crosslinking groups. It is a plasticizer and solvent-free... view more

TEGOPAC® Seal 100 by Evonik is a moisture curing silane modified polymer with PPG as backbone. It is recommended for low modulus sealant formulations which are used in construction applications... view more

AEROSIL® 300 V by Evonik is a densified hydrophilic fumed silica grade. It acts as a rheology modifier. It exhibits optimal dispersion yielding best results in pronounced thickening and thixotropy... view more

ALBIDUR® EP 2240 by Evonik is a dispersed silicone elastomer-modified, Bisphenol-A epoxy resin. It is used as an additive for impact modification and surface improvement in construction adhesives... view more

ALBIDUR® EP 2240 A by Evonik is a dispersed silicone elastomer-modified, Bisphenol-A epoxy resin. It is used as an additive for impact modification and surface improvement in construction adhesives... view more

ANCAMINE® 2390 by Evonik is a low viscosity modified amine. It is used in civil engineering applications such as joint sealants and crack bridging. It acts as a curing agent. It provides high tear... view more

Ancamine® 3456 by Evonik is a formulated aliphatic polyamine adduct designed for use with liquid epoxy resin at ambient temperature. It acts as a curing agent. It offers rapid and highly flexible... view more

ANCAMINE® K54 by Evonik is a tertiary amine. Designed for sealant and concrete adhesives applications. Suitable for solder, sealant, and concrete adhesives applications. It is an activator for other... view more

Ancamide® 1110 by Evonik is dimethylaminomethylphenol as a curing agent. It offers low viscosity. Ancamide® 1110 is used as a cure catalyst in adhesives... view more

Ancamide® 2396 by Evonik is a modified amidoamine intended for use at ambient temperature with liquid epoxy resins. It acts as a curing agent. It possesses very good chemical resistance and very... view more

Ancamide® 3202 by Evonik is a low viscosity polyaminoamide adduct supplied at 90% solids in ethanol. It acts as a curing agent. it offers good cure under high humidity. Ancamide® 3202 is used for... view more

Ancamide® 351A by Evonik is a reactive polyamide based curing agent. It is used in structural adhesives and sealers for concrete. It possesses good corrosion resistance, good color- and light... view more

Ancamide® 501 by Evonik is an accelerated amidoamine. It acts as a curing agent for liquid epoxy resins. It offers faster cure speed and improved chemical resistance than unmodified amidoamines. It... view more

Ancamide® 503 by Evonik is an aliphatic amidoamine. It is a curing agent at room temperature and is designed to be used with liquid epoxy resin. It is a moisture tolerant grade that offers low... view more

DYNAPOL® L 210 by Evonik is saturated polyester resin. It is used in hot laminating adhesives. DYNAPOL® L 210 offers benefits such as good mechanical properties, good reactivity and high solids... view more

DYNAPOL® L 411 by Evonik is a high molecular saturated polyester resin. It is used in hot laminating adhesives. It exhibits good adhesion and good hardness and flexibility balance. It offers good... view more

Dynol™ 604 by Evonik is an ultra low-VOC, low-foam, non-ionic wetting agent and surfactant. It is suitable for use in waterborne systems like adhesives and concrete sealants. Possesses low foam... view more

Polycat® DBU by Evonik is a tertiary amine catalyst that strongly promotes the urethane (polyol-isocyanate) reaction. It is used mainly for specialized applications requiring very strong catalysis... view more

Surfynol® 500S by Evonik is a wetting agent. This surfactant possesses extended open time and workability. It is silicon-free as well as APEO-free. It offers outstanding pigment wetting and prevents... view more

Surfynol® MD-610S by Evonik acts as a highly effective powder defoamer. It is silicon-free as well as APEO-free. It combines the benefits of fast-acting defoaming with long-lasting deaeration at a... view more

VESTAMELT® 753 by Evonik is copolyamide hot-melt adhesive. It used in textile, automotive, electronics and construction industry... view more

VESTAMIN® IPD eCO by Evonik is a crosslinking agent that contains 90% renewable carbon per mass balance. It is a colorless low viscosity liquid with a faint amine odor. It can be used in all typical... view more

VESTOPLAST® 206 by Evonik is a silane modified polyalphaolefin. It is characterized by its excellent adhesion to a wide range of plastics (polypropylene, polyester and polyamide), to wood, glass... view more

VESTOPLAST® 520 by Evonik is a higher viscosity, amorphous polyalphaolefin grade. It is used in hot melt adhesives for cable filling compounds. VESTOPLAST® 520 possesses long open time and low... view more

VESTOPLAST® 828 by Evonik is an amorphous polyalphaolefin grade. It is produced to specification in a continuous Ziegler low-pressure polymerization process. It shows a good thermal stability under... view more

VESTOPLAST® 888 by Evonik is amorphous polyalphaolefin grade. It offers benefits such as high viscosity, good thermal stability under load and short open time. VESTOPLAST® 888 is used in hot melt... view more

VESTOPLAST® 891 by Evonik is amorphous polyalphaolefin grade. It is used in hot melt adhesives for woodworking industry. VESTOPLAST® 891 offers benefits such as high viscosity, good thermal... view more

VESTOPLAST® EP X 01 by Evonik is amorphous polyalphaolefin. It is used in hot-melt adhesives for hygiene sector, lamination, packaging, furniture, constructive bonding and in sealants... view more

VESTOPLAST® EP X 05 by Evonik is amorphous polyalphaolefin. It is used in hot-melt adhesives for hygiene sector, lamination, packaging, furniture, constructive bonding and in sealants... view more

VESTOPLAST® EP X 22 by Evonik is amorphous polyalphaolefin. It is used in hot-melt adhesives for hygiene sector, lamination, packaging, furniture, constructive bonding and in sealants... view more

VESTOPLAST® EP X 35 by Evonik is amorphous polyalphaolefin. It is used in hot-melt adhesives for hygiene sector, lamination, packaging, furniture, constructive bonding and in sealants... view more

VESTOPLAST® EP X 55 by Evonik is amorphous polyalphaolefin. It is used in hot-melt adhesives for hygienic sector, lamination, packaging, furniture, constructive bonding and in sealants... view more

VESTOPLAST® S by Evonik is amorphous polyalphaolefin. It is used as a raw material in hot-melt adhesives in the production of polymer modified bitumen for road construction... view more

VESTOPLAST® SR by Evonik is amorphous polyalphaolefin. It is used as a raw material in hot-melt adhesives in the production of polymer modified bitumen for road construction... view more

VISIOMER® HEMA-P 100 by Evonik is a non-migratory, methyl methacrylate-free, high-performance monofunctional methacrylate with a phosphate group in the side chain. It acts as a flame retardant... view more

Versalink® 740 M by Evonik acts as a high performance diamine curing agent. It is a non-hazardous, off-white powder with wide processing latitude. It has a melting range of 125-128°C and should be... view more

Versalink® P 1000 by Evonik is a low-reactivity aromatic amines for use in polyurea or polyurea-polyurethane hybrid formulations. It is a liquid at ambient temperatures and can be mixed, cast as... view more

Versalink® P 250 by Evonik is a low-reactivity aromatic amines for use in polyurea or polyurea-polyurethane hybrid formulations. It can be blended with other liquid Versalink® curative products to... view more

Versalink® P 650 by Evonik is a low-reactivity aromatic amines for use in polyurea or polyurea-polyurethane hybrid formulations. It is a liquid at ambient temperatures and can be mixed, cast as well... view more