AGITAN® A202E by Munzing is a defoamer for aqueous systems. It is a blend of special wax and mineral oil. It is available in opaque off-white-colored liquid form. It is used in PSA-, laminating... view more

Blend of special wax and hydrophobic silica. Used as defoamer in PSA adhesives, laminating adhesives, packaging adhesives, envelope / Label adhesives, construction adhesives and acrylic / EVA / VA ... view more

Hydrophobic silica. Used as defoamer in acrylic / EVA / VA / Latex-based adhesives... view more

AGITAN® DF 6027 by Munzing is APEO-free, mineral-oil free, defoamer for aqueous systems. It is a blend of polyethers and non-ionic surfactants. It retains high efficiency. It encourages drainage and... view more

AGITAN® DF 6029 by Munzing is APEO-free, mineral-oil free, defoamer for aqueous systems. It is a blend of polyethers and non-ionic surfactants. It retains high efficiency. It encourages drainage and... view more

Di Butoxy Glycol Phthalate by NAYAKEM ORGANICS is dibutoxy glycol phthalate. Acts as a plasticizer. It exhibits compatibility with chloroprene rubbers, vinyl resins (PVC, PVAc) and acrylic resins... view more

It acts as an effective high solvating plasticizer which is free of particulates. Used in latex caulk formulations. Caulks based on this plasticizers are stable and have good adhesive... view more

Polyvinyl chloride. It acts as a plasticizer. Exhibits compatibility with polyvinyl acetate emulsions and acrylics. Provides excellent wet tack, set time and open time. Offers good adhesion- and... view more

Capatue™ SCA-V71E by Nanjing Capatue Chemical is triethoxyvinylsilane. Acts as an adhesion promoter and crosslinker. Exhibits moderate hydrolyzing rate among vinyl series silanes. Provides excellent... view more

Silane USi-2H21 by Nanjing Union Silicon Chemical is ß-(3, 4-Epoxycyclohexyl)ethyltrimethoxysilane. It acts as an adhesion promoter. It appears as colorless transparent liquid. It can also be used as surface modifier... view more

Alcogum® 1370 by Nouryon is a sodium polyacrylate gum thickener. It is used to viscosify waterborne compounds in a variety of applications. It provides stable viscosity over a broad pH range. It... view more

Alcogum® 296-W by Nouryon is a high viscosity, anionic, aqueous solution of sodium polyacrylate. It acts as rheology modifier, stabilizer and surface active agent. It possesses adhesive, suspending... view more

Alcogum® 6940 by Nouryon is a sodium polyacrylate rheology modifier. It provides stable viscosity over a broad pH range. It offers resistance to biological degradation. It is used to thicken... view more

Alcogum® 9710 by is a sodium polyacrylate. It acts as a thickener and viscosifier. It provides stable viscosity over a broad pH range. It offers resistance to biological degradation. It is used to... view more

Alcogum® AN-10 by Nouryon is a sodium polyacrylate rheology modifier and viscosifier. It provides stable viscosity over a broad pH range. It offers resistance to biological degradation. It is used... view more

Organosilane 2A301 by Onichem Specialities is a bis-[3-(trimethoxysilyl) propyl] amine. Acts as an adhesion promoter. It is a light straw colored clear liquid. Shows cross-linking with plasticized PVC (polyvinyl... view more

Organosilane A302T1 by Onichem Specialities is gamma-aminopropyltriethoxysilane. Acts as a coupling agent. It is a colorless and transparent liquid. Provides superior bonds between inorganic substrates and organic... view more

gamma-Isocyanatopropyltrimethoxysilane. Acts as a crosslinker and adhesion promoter. It is a colorless to pale yellow liquid. Exhibits very good thermal-, chemical- and UV (ultra-violet) stability... view more

Organosilane IC302 by Onichem Specialities is a gamma-isocyanatopropyltriethoxysilane. Acts as a crosslinker and adhesion promoter. It is a colorless to pale yellow liquid. Exhibits very good thermal-, chemical- and... view more

gamma-Ureidopropyltriethoxysilane in methanol. Acts as a coupling agent. Suitable with acrylics, polyurethane, polyamide and silicone. Used in adhesives and sealants... view more

ROFLAM 6 by PCC Rokita is N,N-bis-(2-hydroxyethyl) aminomethane phosphonic acid diethyl ester. Acts as non-halogen reactive flame retardant for rigid polyurethane foams. It is also used for epoxy... view more

Foamdoctor G2968 by PennWhite is a non-ionic surfactants in hydrophobic polyol. Acts as foam control agent. It is based on a mixture of mineral oil and non ionic surfactants. It is effective over a wide... view more

Foamdoctor G2970 by PennWhite is a mixture of mineral oil and non-ionic surfactants. Acts as foam control agent. It is effective over a wide pH range and retains a high as well as long lasting efficiency... view more

Foamdoctor G2975 by PennWhite is a non-ionic surfactants in hydrophobic polyol. Acts as foam control agent. It is based on a blend of polyether and non ionic surfactants. It is mineral hydrocarbon free... view more

Calimulse® AOS by Pilot Chemical is a 40% active sodium C14-16 alpha olefin sulfonate. It is a clear anionic surfactant with good economical emulsification and wetting properties. It is free of... view more

Calimulse® EM-22 by Pilot Chemical is a 22% active sodium branched alkyl benzene sulfonate. It is an effective emulsifier which produces stable emulsions. It also has great wetting and handling... view more

Calimulse® L-22 by Pilot Chemical is a 22% active sodium linear alkyl benzene sulfonate. It offers great emulsifying and wetting properties. It is perfect as a primary or co-emulsifier. It is free... view more

Calimulse® L-50 by Pilot Chemical is a 71% active sodium linear alkyl benzene sulfonate for use in paints, coatings and printing inks. It is a high active and viscous linear anionic surfactant. The... view more

Rheology modifier. Used as a flow control agent in a wide range of pigmented vehicles, oils, varnishes, alkyds, alkyd/amino systems, esters, polyurethane’s, cellulosic and acrylic lacquers... view more

PZE-1000 by PolyAziridine Global is an ethylene imine based tri-functional polyaziridine grade. Acts as a crosslinking agent. Exhibits an amine-like odor and a high level of functionality that... view more

PZP-1000 by PolyAziridine Global is propylene imine-based, tri-functional polyaziridine grade with an amine-like odor. It acts as a crosslinking agent. The aziridine end groups can react with active... view more

PC 1100 Silane by AB Specialty Silicones is a versatile aminopropyltriethoxysilane. Used as coupling agent and adhesion promoter for adhesives and sealants. Provides strong bonding, good magnetic... view more

PC 4100 Silane by Power Chemical is a light and heat sensitive gamma-methacryl-oxypropyl-trimethoxysilane. Used as an adhesion promoter at organic/inorganic interfaces, as surface modifier, as... view more

gamma-Glycidoxypropyltriethoxysilane. It acts as crosslinking agent, coupling agent and adhesion promoter. It is a clear colorless, low-odor liquid. It enhances wet electrical properties of... view more

gamma-Glycidoxypropylmethyldiethoxysilane. It acts as crosslinking agent, coupling agent and adhesion promoter. It is a clear colorless, low-odor liquid. It enhances wet electrical properties of... view more

gamma-Glycidoxypropylmethyldiethoxysilane. It acts as crosslinking agent, coupling agent and adhesion promoter. It is a clear colorless, low-odor liquid. It enhances wet electrical properties of... view more

Highly effective hindered amine. Used as a light stabilizer in adhesives, sealants and plastisols. Possesses compatibility with polypropylene, polyethylene, styrenics, unsaturated polyester... view more

SABOSTAB® UV 65 by Sab is a Bis(1,2,2,6,6-pentamethyl-4-piperidinyl) sebacate + Methyl(1,2,2,6,6-pentamethyl-4-piperidinyl)sebacate. It acts as hindered amine light stabilizer. It has low molecular... view more

SN-THICKENER 636 by San Nopco Limited (Sanyo Chemical) is an anionic alkali swellable acrylic type rheology modifier. It is suitable for use in adhesives. The recommended usage level of SN-THICKENER... view more

SCHWEGO® foam 6325 by Schwegmann is a liquid, very effective defoaming additive for those based on styrene/butadiene latex and acrylic copolymers. It is VOC-free and silicone-free. Suitable for use in... view more

SCHWEGO® foam 8013 by Schwegmann is a combination of hydrocarbons with emulsifying agents. Acts as a silicone-free defoamer for water-based systems and adhesives especially for those based on... view more

SCHWEGO® foam 8325 by Schwegmann is a silicone- and VOC-free defoamer. It is a combination of hydrocarbons. It is a very effective water-based defoaming additive for those based on styrene/butadiene latex... view more

SCHWEGO® foam 8336 by Schwegmann is a formulation of polysiloxane adduct and surface active alcohols. Acts as a VOC-free and biodegradable defoamer. It shows very good defoaming in adhesives and... view more

Texipol® 63-201 is an easy to use, low viscosity, anionic inverse emulsion thickener by Scott Bader. Imparts a stringy and mildly pseudoplastic rheology to aqueous-based compositions. It does not... view more

Texipol® 63-202 by Scott Bader is an anionic inverse emulsion, easy to use, low viscosity thickener for adhesives and sealants. It is supplied as a pre-neutralised dispersion as the sodium salt of... view more

Texipol® 63-237 by Scott Bader is an easy to use, anionic, low viscosity, multifunctional inverse emulsion thickener for adhesives. It does not require any neutralisation or addition of other... view more

Texipol® 63-400 by Scott Bader is an anionic rheology modifier that imparts pseudoplastic properties to aqueous-based compositions. It is supplied as a pre-neutralized dispersion as the sodium salt... view more

Texipol® 63-513 by Scott Bader is a low viscosity, easy to use, inverse emulsion synthetic thickener based on bio-derived content. Imparts pseudoplastic rheology to aqueous compositions and shows... view more

Crosslinker HD105 by Shanghai Holdenchem is 2-[(3-aziridin-1-ylpropionyl)methyl]-2-ethylpropane-1,3-diylbis(aziridine-1-propionate). Acts as a crosslinking agent and adhesion promoter. Crosslinker HD105 is a high molecular... view more

3-Glycidoxypropyl methyldiethoxysilane. It acts as coupling agent. The individual molecules of silane coupling agent contain two types of reactive functional groups that are epoxy group and alkoxy... view more

3-Glycidoxypropyl triethoxysilane. It acts as coupling agent. The individual molecules of silane coupling agent contain two types of reactive functional groups that are epoxy group and alkoxy group... view more

3-Methacryloxypropyl methyldiethoxysilane. It acts as coupling agent. The individual molecules of silane coupling agent contain two types of reactive functional groups that are methacryloxy group... view more

3-Methacryloxypropyl triethoxysilane. It acts as coupling agent. The individual molecules of silane coupling agent contain two types of reactive functional groups that are methacryloxy group and... view more

3-Isocyanatepropyltriethoxysilane. Used as a coupling agent for urethane adhesives and sealants and as a modifier to hydroxy resins. Gives moisture curable alkoxysilane functional polymers. Provides... view more

WS 360 by Siliconi is non-ionic, silicone, VOC (volatile organic compounds) and APEO (alkylphenol ethoxylates) free compound based on eco-compatible ingredients. Acts as an antifoaming... view more

Non-ionic, silicone-, VOC (volatile organic compounds)- and APEO (alkylphenol ethoxylates)- free compound based on fatty acids and ester derivatives. Acts as an antifoaming (defoaming) and... view more

Non-ionic, silicone-, VOC (volatile organic compounds)- and APEO (alkylphenol ethoxylates)- free compound based on fatty acids and ester derivatives. Acts as an antifoaming (defoaming) and... view more

Tetrachloroisopthalonitrile. It is a broad-spectrum, non-systemic anti-fungal agent. It shows broad & effective activity against stain, mold, fungi. Has superior efficacy and low use rate. It is... view more

Tetrachloroisopthalonitrile. It is a broad-spectrum, non-systemic anti-fungal agent. It shows broad & effective activity against stain, mold, fungi. It is free of organic solvents and VOC. Has... view more

RHODOLINE® 585 by Syensqo is acrylic polymer. It acts as a versatile anti-foam agent especially suited for use in the production of acrylic, EVA, vinyl-acetate and other resin emulsions. RHODOLINE® 585 is... view more

RHODOLINE® DF 6618 by Syensqo is a highly efficient foam control agent for aqueous systems. It is particularly recommended for use with systems based on styrene acrylics, polyvinyl acetate homopolymers... view more

RHODOLINE® DF 6681 by Syensqo is a mixture of mineral oils and nonionic surfactants. It is used in water-based pressure-sensitive adhesives. It acts as a highly-efficient foam control agent. RHODOLINE® DF 6681 is... view more

Rhodafac® RS-610 E by Syensqo is an anionic polyoxyethylene tridecyl phosphate ester. It acts as a surfactant. It offers anti-wear properties, extreme pressure, corrosion inhibition, staining inhibition... view more

Synsorb -1 is an ethyl 4-[[(methylphenylamino) methylene] amino] benzoate by Synchemer. It acts as a UV absorber. It can absorb UV light of 300-330 nm. It offers excellent light stability and is... view more

Mixture of substituted benzophenone. It acts as an effective UV absorber. It is 100% active pale yellow liquid that protects from damaging UV radiation which is a component of natural sunlight. It... view more

2-Ethylhexyl-2-cyano-3,3-diphenylacrylate. It acts as an effective light stabilizer. It is clear, light amber, viscous liquid that protects from damaging UV radiation which is a component of natural... view more

Hydrogenated rosin/ester. Acts as a tackifier. It is highly hydrogenated for best oxidative and UV stability. Has unique compatibility with SBC, acrylic and polyolefin for pressure sensitive as well... view more

Hydrogenated rosin/ester. Acts as a tackifier. It is highly hydrogenated for best oxidative and UV stability. Has unique compatibility with SBC, acrylic and polyolefin for pressure sensitive as well... view more

ACTICIDE® 14 by Thor is a mixture of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-4-isothiazolin-3-one. It is a bivalent metal salt stabilized. It prevents the growth of bacteria and fungi... view more

ACTICIDE® LA by Thor is a mixture of 2-bromo-2-nitropropane-1, 3-diol (8.80%), 5-chloro-2-methyl-4-isothiazolin-3-one (0.85%) and 2–methyl–4–isothiazolin–3–one (0.28%). Acts as an industrial... view more

ACTICIDE® MBS by Thor is a synergistic blend of 1,2-benzisothiazolin-3-one (2.5%) and 2-methyl-4-isothiazolin-3-one (2.5%). It is a formaldehyde-free grade and acts as an industrial biocide. It... view more

ACTICIDE® MV by Thor is a mixture of 5–chloro–2–methyl–4–isothiazolin–3–one (1.11%) and 2–methyl–4–isothiazolin–3–one (0.37%). Acts as an industrial microbiocide. It controls the growth of bacteria... view more

ACTICIDE® MV 14 by Thor is a mixture of 5–chloro–2–methyl–4–isothiazolin–3–one (10.6%) and 2–methyl–4–isothiazolin–3–one (3.5%). Acts as an industrial microbiocide. It controls the growth of... view more

Oil and silicone-free defoamer for adhesives. Suits for water reducible and acrylic binders. Prevents surface film imperfections including crawling and cratering. Possesses effectiveness under high... view more

Modified acetylenic diol surfactant (non-ionic). It acts as a foam control wetting agent and dispersing agent. It provides low dynamic and static surface tension and enhances flow and levelling. It... view more

PowerStab™ 292 by TinToll (PCC Group) is a blend of bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-sebacate and 1-(methyl)-8-(1,2,2,6,6-pentamethyl-4-piperidinyl)-sebacate. It is a low molecular weight... view more