THIXATROL® AS 8053 by Elementis is diamide-based low temperature activation rheological modifier and highly effective organic thixotrope. It is labeling-free and is based on renewable raw material sources... view more

THIXATROL® PM 8056 by Elementis is a cost effective, seed resistant organic rheological modifier. Designed for sealant applications. Provides high viscosity, thixotropy and thick layer sag control in high... view more

Omyabond 120 by Omya is a low-moisture, ultrafine, natural calcium carbonate filler designed for reactive adhesives and sealants. It is a treated mineral with a high surface area. It can be used as... view more

Nanostrength® E21 by Arkema is a self-assembling block co-polymer with high butadiene content. It consists of polystyrene, 1, 4-polybutadiene and syndiotactic poly (methyl methacrylate). It... view more

Nanostrength® M53 by Arkema is a high molecular weight, transparent central block of poly (butyl acrylate) surrounded by two poly (methyl methacrylate) blocks. It is a self-assembling block... view more

RHEOBYK® -7502 by BYK is a 100% emission-free, 100% micronized, effective rheology additive in powder form for use in single component, silane-modified prepolymer systems and epoxy systems. It is... view more

RHEOBYK® -7503 by BYK is a 100% emission-free, micronized, highly effective rheology additive in powder form. It is used in single component, silane-modified prepolymer systems and epoxy systems... view more

CAB-O-SIL® HS-5 by Cabot is a synthetic, amorphous, colloidal silica. Used as rheology controler for adhesives and sealants. CAB-O-SIL® HS-5 has small particle size, big surface area and high... view more

CAB-O-SIL® TS-530 by Cabot is a fumed silica, surface treated with hexamethyldisilazane (HMDZ). Possesses high purity, aggregated & hydrophobic structure, submicron particle size and low bulk... view more

CAB-O-SIL® TS-720 by Cabot is a hydrophobic fumed silica treated with polydimethylsiloxane (PDMS). It is characterized by medium surface area, high purity, aggregated structure, submicron particle... view more

CAB-O-SIL® TS-720D by Cabot is a medium surface area, densed form of fumed silica. It has been surface modified with polydimethylsiloxane. It is an outstanding choice for moisture-sensitive systems... view more

ELFTEX® 8 by Cabot is an easy-to-disperse specialty carbon black. It exhibits medium jetness and regular color. It is listed with TSCA, DSL/NDSL, EINECS/ELINCS, ENCS, IECSC, KECL, PICCS, AICS, NZIoC... view more

Synperonic™ PE/P105 by Croda is a nonionic, water soluble surfactant. It acts as an effective defoamer and wetting agent. It also functions as polymeric emulsion stabilizer. Offers good hydrolytic... view more

Synperonic™ PE/P84 by Croda is a water soluble, nonionic ethylene oxide/propylene oxide block copolymer. It acts as a polymeric emulsion stabilizer, effective defoamer and wetting agent. This... view more

CELLOSIZE™ Hydroxyethyl Cellulose HEC 18 by Dow is hydroxyethyl cellulose-based plasticizer. CELLOSIZE™ Hydroxyethyl Cellulose HEC 18 is suitable for tile adhesives... view more

CELLOSIZE™ Hydroxyethyl Cellulose QP-4400H Europe by Dow is a plasticizer. CELLOSIZE™ Hydroxyethyl Cellulose QP-4400H Europe is used in tile adhesives... view more

CELLOSIZE™ Polymer HEC-10 Europe by Dow is hydroxyethyl cellulose-based plasticizer. It is cold processable and offers rheology modification. CELLOSIZE™ Polymer HEC-10 Europe is used in tile... view more

CELLOSIZE™ QP-10000H by Dow is a plasticizer. It offers rheology modification and medium thickening efficiency. CELLOSIZE™ QP-10000H is used in tile adhesives... view more

WALOCEL™ MKX 45000 PP 10 Cellulose Ether by Dow is a modified hydroxyethyl methyl cellulose-based rheology modifier. It provides excellent open time, slip & impact resistance, adhesion and stear... view more

Esacure 3644 by IGM Resins is a highly efficient type II photoinitiator of the ketocoumarin class. It offers good performance, high reactivity, good solubility, low yellowing and low odor during and... view more

Esacure ONE by IGM Resins is a difunctional oligomeric alpha hydroxy ketone based type I free radical photoinitiator. It provides through and surface cure. It exhibits low VOC, low migration and low... view more

Omnirad 184 by IGM Resins is a highly efficient, non-yellowing photoinitiator. It is used to initiate the photo-polymerization of chemically unsaturated prepolymers like acrylates, in combination with... view more

Omnirad 403 by IGM Resins is a versatile Photoinitiator for the radical polymerization of unsaturated resins upon UV light exposure. It exhibits high reactivity and is used in high-end optical... view more

Omnirad 4PBZ by IGM Resins is an effective Type II photoinitiator. Used to initiate radical polymerization of unsaturated oligomers after exposure to UV light. It exhibits faster cure and absorption at... view more

Kraton™ A1535 by KRATON is butylene/ethylene/styrene copolymer. It acts as a thickening agent. It has a unique mid-block linear structure, which is compatible with natural, polar and ester oils. It... view more

Kraton™ A1536 by KRATON is butylene/ethylene/styrene copolymer. It acts as a thickening agent. It has a unique mid-block linear structure, which is compatible with natural, polar and ester oils. It... view more

Kraton™ D1101 AIM by KRATON is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with calcium carbonate. Kraton™ D1101... view more

KRATON™ D1101 ESM by KRATON is alear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. KRATON™ D1101 ESM... view more

KRATON™ D1102 ASM by KRATON is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied in the form of powder dusted with amorphous silica... view more

Anhydrous aluminum silicate. Acts as a low moisture filler and reinforcing agent. It is a unique, ultra low moisture, high brightness, medium particle size, calcined clay. It incorporates readily... view more

Hydrous aluminum silicate. KaMin™ 35 by KaMin acts as a filler and extender without thickening. It is a general purpose, medium brightness, coarse particle size filler with low oil and water demand... view more

Hydrous aluminum silicate. Acts as a filler and extender. It is available in spray dried bead form. It is a general purpose, medium brightness, coarse particle size filler with low oil and water... view more

KaMin™ 611 by KaMin is hydrous aluminum silicate. It is a high brightness, fine particle size kaolin clay with moderate water demand. It is stable under ambient temperature (21°C) and pressure... view more

Anhydrous aluminum silicate. Acts as a reinforcing agent. KaMin 70C is a high brightness, medium particle size, calcined kaolin. It has moderate oil absorption and water demand. It is available as... view more

KURARAY POVAL™ 49-88 S2 is polyvinyl alcohol (PVOH) manufactured by Kuraray by alcoholysis of polyvinyl acetate. Possesses a uniform chemical structure and greater adhesion. Designed for the... view more

KURARAY POVAL™ 5-88 S2 is a partially hydrolyzed polyvinyl alcohol (PVOH) manufactured by Kuraray by alcoholysis of polyvinyl acetate. Designed for the modification of remoistenable adhesives... view more

KURARAY POVAL™ 8-88 S2 by Kuraray is polyvinyl alcohol (PVOH) having a uniform chemical structure and greater adhesion. Designed for the modification of remoistenable adhesives employed mainly in... view more

KURARAY POVAL™ LM-10 HD is an ultra-low saponified polyvinyl alcohol by Kuraray. Designed for hot-melt adhesives. It can be self-dispersed into water with agitation. It is manufactured by... view more

KURARAY POVAL™ LM-20 by Kuraray is an ultra-low saponified polyvinyl alcohol manufactured by alcoholysis of polyvinyl acetate. It can be self-dispersed into water with agitation. Designed for... view more

Rhenofit® C by Lanxess is a desiccant in rubber compounds for extruded seals. The composition of this grade is 95% calcium oxide coated with 5% special dispersing agents. It offers prevention of... view more

Rhenofit® TRIM/S by Lanxess is an activator for peroxide vulcanization in technical molded and extruded seals based on EPDM, EPM and NBR. It is a blend of trimethylolpropane trimethacrylate and... view more

Rhenosin® A by Lanxess is a phenol formaldehyde resin with hexamethylene tetramine. It can be used as a reinforcing resin for solid rubbers for oil- resistant seals. Offers compatibility with NR... view more

Lorama Protective Colloid 60 (LPC60) is a polysaccharide based natural product. It is a water dispersible non-ionic polymer in the form of a non-hazardous free flowing powder. It is non-toxic and... view more

Lanco™ A 1602 by Lubrizol is a amide wax. Exhibits improved color stability due to an especially low amine value. It is characterized by good matting efficiency, soft feel, good release and slip... view more

Lanco™ THIX P 12 by Lubrizol is a montmorillonite-based thickener and anti-settling agent. It offers thixotropic gels with good stability against temperature, pH and electrolytes. It shows good... view more

AGITAN® P 833 by Munzing acts as an anti-foaming agent. It is a VOC-free and APE-free grade. It is a blend of liquid hydrocarbons and polyglycols on an inorganic carrier. It is used as a defoamer in... view more

Chemigum® P35 by Omnova Solutions (Synthomer) is a pre-crosslinked butadiene and acrylonitrile co-polymer. It contains calcium carbonate as a partioning agent. It provides plasticizer retention... view more

Chemigum® P83 by Omnova Solutions (Synthomer) is a pre-crosslinked butadiene and acrylonitrile co-polymer. It contains PVC as a partioning agent. It provides excellent elongation and plasticizer... view more

Chemigum® P86F by Omnova Solutions (Synthomer) is a pre-crosslinked butadiene and acrylonitrile co-polymer. It contains calcium carbonate as a partioning agent. It acts a processing aid and as... view more

Wingstay L Flakes by Omnova Solutions (Synthomer) is a highly effective polyphenolic antioxidant. It can be used directly, or after being pre-dispersed or emulsified for latex applications. It... view more