Priplast™ 3294 by Cargill is a semi-crystalline, bio-based polyester polyol. It offers excellent water resistance, superior surface hardness and outstanding mechanical properties. Exhibits good... view more

Behenyl Acrylate 1822 (BEA 1822) by BASF is a mixture of C18, C20 and C22 acrylates. It is a monofunctional monomer with a long hydrophobic side chain pendant group. It imparts flexibility, impact... view more

Behenyl Acrylate 1822 F (BEA 1822 F) by BASF is behenyl acrylate (acrylic acid ester). It provides low shrinkage, hydrophobicity and weatherability to polymers. Forms homopolymers and copolymers... view more

Behenyl Methacrylate 1822 F (BEMA 1822 F) by BASF is a mixture of C18, C20 and C22 methacrylates. It is a low volatility, monofunctional monomer with a long, hydrophobic side chain. Forms... view more

Joncryl® 581 by BASF is high solid acrylic polyol. Offers good chemical resistance and hardness. Used in adhesives... view more

Joncryl® 587 by BASF is workhorse acrylic polyol. Offers very fast dry with long pot life. Possesses very good UV- and chemical- resistance. Provides cost benefit and formulator versatility... view more

BLACK PEARLS® 570 by Cabot is a specialty carbon black. It exhibits good coloration and covering power. It provides higher levels of jetness in comparison to Cabot’s BLACK PEARLS® 430 and BLACK... view more

Corona™ 9 by Croda is skin-friendly, water in oil emulsion stabilizer that reduced tackiness. It is a scratch-resistant and anti-blocking additive. It prevents scarring on the surface, especially at... view more

Maxemul™ 5010 by Croda is a non-ionic, co-polymerizable surfactant for use as a stabilizer in latex binders typically used in pressure-sensitive adhesives. It is reactive towards vinylic unsaturated... view more

Zephrym™ PD 2246 by Croda is a polymeric dispersant. It offers enhanced dispersion viscosity and extended storage capability. It is recommended for both organic and inorganic pigments including... view more

Finntalc M15 by Elementis is floated, medium sized, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M30 by Elementis is floated, coarse, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M40 by Elementis is floated, coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. It is recommended for adhesives and polyester putties... view more

Finntalc M50 by Elementis is floated, very coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. Finntalc M50 is recommended for adhesives and polyester putties... view more

Finntalc M65 by Elementis is talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Jeffamine® M-2095 Amine by Huntsman is polyethylene glycol (PEG)-based polyetheramine. It is a hydrophilic polyether monoamine of approximately 2000 molecular weight. Exhibits moderate viscosity... view more

Jeffamine® M-3085 Amine by Huntsman is a hydrophilic polyether monoamine of approximately 3000 molecular weight with a PO/EO mole ratio of about 8/58. Exhibits moderate viscosity and low vapor... view more

Omnirad 4MBZ Flakes by IGM Resins is an effective Type II photoinitiator. Used in combination with tertiary amine synergists to initiate radical polymerization of unsaturated oligomers such as acrylates after... view more

Cariflex™ IR0307 K by KRATON is a solution polymerized polyisoprene with a high cis-1,4 content. It exhibits high molecular weight. It is used as a replacement for natural rubber in a wide range of... view more

Cariflex™ IR0310 K by KRATON is a solution polymerized polyisoprene with a high cis-1,4 content. It possesses high molecular weight. It is used as a replacement for natural rubber in a wide range of... view more

Polymeg 2000 Polyol by LyondellBasell is a linear diols with a backbone of repeating tetramethylene units connected by ether linkages. The chain is capped with primary hydroxyl units. At slightly... view more

Polymeg 2000 Polyol by LyondellBasell is polytetramethylene ether glycols (PTMEG) produced by polymerizing tetrahydrofuran. The chain is capped with primary hydroxyl units. At slightly elevated... view more

1,10- Decanediamine by Mitsui Chemicals acts as a curing agent for epoxy resin. It offers excellent wet resistance and mechanical properties. 1,10- Decanediamine is listed with TSCA inventory... view more

1,10- Decanediamine by Mitsui Chemicals is an aliphatic diamine. The epoxy resin made from this monomer has excellent wet resistance and mechanical properties. It can be used in curing agent. 1,10... view more

1, 12-Dodecanediamine by Mitsui Chemicals is a curing agent for epoxy resin. It offers excellent wet resistance and mechanical properties. 1,12- Dodecanediamine is listed with TSCA inventory... view more

1,12-Dodecanediamine by Mitsui Chemicals is an aliphatic diamine. The epoxy resin made from this monomer has excellent wet resistance and mechanical properties. 1,12-Dodecanediamine is listed with... view more

4,4'-(m-Phenylenediisopropylidene) dianiline by Mitsui Chemicals is a curing agent for epoxy resin. It is a methylene inserted aliphatic diamine. 4,4'-(m-Phenylenediisopropylidene) dianiline offers... view more

Polyethylene glycol 1000. Acts as a humectant, plasticizer, lubricant and antistatic agent. It is a hygroscopic polymer highly soluble in water due to the hydrophilic characteristic provided by the... view more

Polyethylene glycol 1500. Acts as a humectant, plasticizer, lubricant and antistatic agent. It is a hygroscopic polymer highly soluble in water due to the hydrophilic characteristic provided by the... view more

NAFOL 24+ by Sasol is a blend of high purity linear primary alcohols with even-numbered carbon chain lengths. It is available in off-white color waxy solid form with a slightly sweet odor. It is... view more

Microcrystalline wax (100% by weight). It is a white to yellow colored solid. Applications include hot melt adhesives and pipe wrapping tapes. Meets FDA (U.S. Food and Drug Administration)... view more

Microcrystalline wax (100% by weight). It is a white to yellow colored solid. Insoluble in water and soluble in oil & organic solvents. Applications include hot melt adhesives, pipe wrapping tapes... view more

Microcrystalline wax (100% by weight). It is a white to yellow colored solid. Insoluble in water and soluble in oil & organic solvents. Applications include hot melt adhesives and sealants. Meets... view more

Aliphatic polyester polyol. It has crystalline nature designed to impart an excellent bonding profile. It contains exclusively primary hydroxyl groups. It allows adhesives to have a higher initial... view more

Aliphatic polyester polyol. It is designed to have excellent adhesion to a wide variety of substrates. Complies with AICS, DSL, IECSC, ENCS, ECL, PICCS, TSCA and New Zealand... view more

Stepanpol® PC-205P-160 by Stepan Company is aliphatic polyester polyol. It can be used in polyurethane adhesives. This crystalline grade offers good bonding to variety of substrates. Stepanpol®... view more

Stepanpol® PC-205P-20 by Stepan Company is a prepolymer grade aliphatic polyester polyol of crystalline nature designed to impart an excellent bonding profile. Stepanpol® PC-205P-20 is designed for... view more

Stepanpol® PC-205P-30 by Stepan Company is a prepolymer grade aliphatic polyester polyol of crystalline nature designed to impart an excellent bonding profile. Stepanpol® PC-205P-30 is recommended... view more

CYLINK® MBA Monomer by Syensqo is N, N'-Methylene bisacrylamide bi-functional internal cross-linking monomer. It is also capable of free radical polymerization. It forms extensive polymer networks. It... view more

Uvacure® 1500 by Syensqo is a very pure cycloaliphatic di-epoxide resin. It is used as a primary component of cationic curing formulations for laminating and assembly adhesives. Uvacure® 1500 provides... view more

Uvacure® 1501 by Syensqo is cyloaliphatic di-epoxide. It reduces or eliminates the odor emitted by sulfonium salt photoinitiators. Uvacure® 1501 is used in cationic curing formulations for laminating and... view more

Uvacure® 1502 by Syensqo is a low viscosity, cyloaliphatic epoxide. It is used in cationic curing formulations for laminating and assembly adhesives. It offers very fast cure. Uvacure® 1502 can be used... view more

Kristalex™ 5140SD by Synthomer is a high softening point, low molecular weight hydrocarbon resin with low organic volatile content and low odor. It is made up of pure aromatic monomers. It is... view more

Norbornene by Topas Advanced Polymers (Polyplastics) is bicyclo-[2.2.1] heptane (Synonyms: 2-Norbornylene, 2-Norbornene and Norcamphene). It is made by the Diels-Alder reaction of cyclopentadiene... view more

EPIKURE™ Curing Agent 3100-ET-60 by Westlake Epoxy is a semi-solid, epoxy curing agent. It is a high molecular weight, reactive polyamide and blending resin based on dimerized fatty acid as well as... view more

EPON™ Resin 1002F by Westlake Epoxy is a solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. It exhibits unique melt viscosity for hot melt adhesives. This resin will not block or... view more

EPON™ Resin 1007F by Westlake Epoxy is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. It is an extremely clean resin. It imparts unique melt... view more

EPON™ Resin 1031 by Westlake Epoxy is a novolac-free, multifunctional epoxy resin. It possesses low concentration of ionic contaminants, saponifiable chloride content as well as low melt viscosity... view more

EPON™ Resin 154 by Westlake Epoxy is epoxy resin. It is manufactured from phenolic novolac resin and epichlorohydrin. When cured with appropriate materials, highly crosslinked compositions... view more