Ateva® 1820 by Celanese is an antioxidant-free, ethylene-vinyl acetate copolymer. It is used in hot-melt adhesives for packaging, labeling, case & carton closing, lamination and book binding... view more

Ateva® 1850A by Celanese is ethylene vinyl acetate (EVA) copolymer containing antioxidant. It is suitable for use in hot-melt adhesives for packaging, labeling, case & carton closing, lamination and... view more

Ateva® 1880A by Celanese is a copolymer containing antioxidant used to minimize viscosity changes of the hot-melt blends during processing. It is suitable for use in hot-melt adhesives for... view more

Ateva® 3325AC by Celanese is ethylene vinyl acetate copolymer. It is designed for use in hot-melt adhesives for packaging, labeling, case and carton closing, lamination and book binding... view more

Ateva® 3342AC by Celanese is ethylene vinyl acetate copolymer. It is suitable for use in hot-melt adhesives for packaging, labeling, case and carton closing, lamination and book binding... view more

DYNACOLL® 7110 by Evonik is saturated copolyester. It is used in moisture curable hot melt adhesives and sealants. It is suitable for automotive, wood-working, bookbinding, packaging, textile and... view more

DYNACOLL® 7130 by Evonik is a linear, saturated, amorphous copolyester. It is used in moisture curable hot melt adhesives and sealants. It is suitable for automotive, wood-working, bookbinding... view more

DYNACOLL® 7131 by Evonik is an amorphous, saturated copolyester. It is used in moisture curable hot melt adhesives and sealants. It is suitable for automotive, wood-working, bookbinding, packaging... view more

DYNACOLL® 7140 by Evonik is an amorphous, saturated copolyester. It is used in moisture curable hot melt adhesives and sealants. It is suitable for automotive, wood-working, bookbinding, packaging... view more

DYNACOLL® 7150 by Evonik is an amorphous, saturated copolyester. It is used in moisture curable hot melt adhesives and sealants. It is suitable for automotive, wood-working, bookbinding, packaging... view more

Styrenated terpene resin (Aromatic modified terpene resin) by Foreverest Resources acts as a tackifier. Provides excellent adhesion to a range of substrates including polyolefins. Offers a very good balance of properties when compounded with styrenic block... view more

Flytac 102 -100 by Guangzhou Flying Dragon is a pentaerythritol rosin ester. It acts as a tackifier. Possesses the properties of high viscosity, low VOC, excellent heat, aging stability, excellent polymer... view more

Flytac 102 -100F by Guangzhou Flying Dragon is pentaerythritol rosin ester. Acts as a tackifier. Possesses the properties of high viscosity, low VOC, excellent heat, aging stability, excellent polymer compatibility... view more

A-C® 1702 by Honeywell acts as a lubricant and plasticizer. It is a synthetic, amorphous, grease-like, low temperature, low density polyethylene (PE) homopolymer grade. It improves adhesion to... view more

A-C® 5180 by Honeywell acts as an adhesion promoter. It is a soft, ethylene- acrylic acid copolymer grade. It enhances adhesion to hot melt adhesive. It lowers application temperature, prevents oil... view more

Omnicat 270 by IGM Resins is a heavymetal-free, high-molecular-weight, sulfonium salt-based photo initiator. It is recommended for the cationic polymerization of formulations based on epoxies or... view more

Omnirad 4MBZ Flakes by IGM Resins is an effective Type II photoinitiator. Used in combination with tertiary amine synergists to initiate radical polymerization of unsaturated oligomers such as acrylates after... view more

Omnirad EDB by IGM Resins is a highly efficient tertiary amine synergist. It is used in conjunction with type II photoinitiator. It generates free radicals that initiate radical polymerization of... view more

Omnirad TPO by IGM Resins is a highly efficient, low yellowing, free-radical type 1 photoinitiator. Used to initiate radical polymerization of unsaturated oligomers like acrylates, after exposure to... view more