Priplast™ 3172 by Cargill is a semi-crystalline polyester polyol building block. It is a vegetable-oil based and exhibits low color, excellent stability, strength and enhanced durability. It affords... view more

Priplast™ 3192 by Cargill is a semi-crystalline polyester polyol. It is an all-round building block for polyurethane and polyurethane dispersions. It offers good adhesion to a wide range of flexible... view more

Priplast™ 3294 by Cargill is a semi-crystalline, bio-based polyester polyol. It offers excellent water resistance, superior surface hardness and outstanding mechanical properties. Exhibits good... view more

Benzoflex™ 352 plasticizer by Eastman is a white flake solid plasticizer. Designed for hot-melt adhesives and sealants. All components of Benzoflex™ 352 plasticizer are listed in TSCA, DSL, CEPA... view more

Behenyl Acrylate 1822 (BEA 1822) by BASF is a mixture of C18, C20 and C22 acrylates. It is a monofunctional monomer with a long hydrophobic side chain pendant group. It imparts flexibility, impact... view more

Behenyl Acrylate 1822 F (BEA 1822 F) by BASF is behenyl acrylate (acrylic acid ester). It provides low shrinkage, hydrophobicity and weatherability to polymers. Forms homopolymers and copolymers... view more

Behenyl Methacrylate 1822 F (BEMA 1822 F) by BASF is a mixture of C18, C20 and C22 methacrylates. It is a low volatility, monofunctional monomer with a long, hydrophobic side chain. Forms... view more

Stearyl Acrylate 1618 NA (SA 1618 NA) by BASF is a monofunctional monomer with long hydrophobic side chain. Imparts flexibility, impact strength, hydrophobicity, low shrinkage, chemical resistance... view more

acResin® ZeroPCF A 204 UV by BASF is an UV cross-linkable, biocides-, MOSH-, MOAH- & solvent-free, high-performance acrylic hot-melt polymer. Exhibits very good shear-, good- tack & peel properties, excellent... view more

BLACK PEARLS® 570 by Cabot is a specialty carbon black. It exhibits good coloration and covering power. It provides higher levels of jetness in comparison to Cabot’s BLACK PEARLS® 430 and BLACK... view more

Corona™ 9 by Croda is skin-friendly, water in oil emulsion stabilizer that reduced tackiness. It is a scratch-resistant and anti-blocking additive. It prevents scarring on the surface, especially at... view more

Maxemul™ 5010 by Croda is a non-ionic, co-polymerizable surfactant for use as a stabilizer in latex binders typically used in pressure-sensitive adhesives. It is reactive towards vinylic unsaturated... view more

Zephrym™ PD 2246 by Croda is a polymeric dispersant. It offers enhanced dispersion viscosity and extended storage capability. It is recommended for both organic and inorganic pigments including... view more

Finntalc M15 by Elementis is floated, medium sized, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M30 by Elementis is floated, coarse, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M40 by Elementis is floated, coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. It is recommended for adhesives and polyester putties... view more

Finntalc M50 by Elementis is floated, very coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. Finntalc M50 is recommended for adhesives and polyester putties... view more

Finntalc M65 by Elementis is talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Jeffamine® M-2095 Amine by Huntsman is polyethylene glycol (PEG)-based polyetheramine. It is a hydrophilic polyether monoamine of approximately 2000 molecular weight. Exhibits moderate viscosity... view more

Jeffamine® M-3085 Amine by Huntsman is a hydrophilic polyether monoamine of approximately 3000 molecular weight with a PO/EO mole ratio of about 8/58. Exhibits moderate viscosity and low vapor... view more