Dynasylan® 1124 by Evonik acts as an adhesion promoter and surface modifier with excellent crosslinking properties. It is a secondary aminofunctional methoxy-silane possessing two symmetric silicon... view more

Dynasylan® 1189 by Evonik is a bifunctional silane. Acts as an adhesion promoter or as a surface modifier. Provides flexural strength, tensile strength, impact strength, modulus of elasticity... view more

Rheovis® AS 1188 by BASF is a highly effective rheology modifier for use in a wide range of water-based adhesives. It is equally effective over the wide pH range from 4 to 12. It is an acrylic... view more

Tinuvin® 928 by BASF is an UV absorber of the hydroxyphenyl benzotriazole class. Used in hotmelt, reactive, solvent-based, radiation curing & construction adhesives and sealants. Exhibits... view more

Deotack® LRE by DOG Chemie is a liquid rosin ester resin. Acts as a polar tackifying resin with low odor. It is soluble in esters, aliphatic solvents, acetone or petroleum but insoluble in water and... view more

DERTOLINE G2 L by DRT is rosin esterified with glycerine-based tackifier. This deodorized and stabilized rosin is used in based hot-melt adhesives for packaging, bookbinding, woodworking, labeling... view more

Solvent-free waterborne emulsion of a low softening point aromatic hydrocarbon resin. Acts as a tackifier in acrylic latexes, natural rubber/ SBR latex blends, natural rubber latex, EVA Latex and... view more

GR-90L by Fujian Ninghua Lifeng Chemical is rosin ester. Acts as a tackifier. Possesses light color, good heat resistance, durability, low odor, good solubility and compatibility. Can greatly improve the initial... view more

A-C® 1325P by Honeywell is a propylene maleic anhydride copolymer grade, suitable for aqueous adhesive applications. Used in sealants, pressure-sensitive hot melt, amorphous poly-olefin (APAO)-based... view more

A-C® 400 by Honeywell acts as an adhesion promoter and rheology modifier. It is ethylene vinyl acetate (EVA) copolymer with a vinyl acetate content of 13% used extensively in hot-melt adhesive... view more

A-C® 5120 by Honeywell is an ethylene acrylic acid copolymer grade. It is an adhesion promoter to various substrates, used in hot melt pressure-sensitive adhesives. Compatible with ethylene vinyl... view more

A-C® 540 by Honeywell is an ethylene acrylic acid copolymer grade. Acts as an adhesion promoter which is used in hot melt pressure-sensitive adhesives. Compatible with ethylene vinyl acetate and PA... view more

A-C® 573P by Honeywell acts as an adhesion promoter even in cold temperature. It is ethylene maleic anhydride copolymer grade. It is used in hot melt adhesive and pressure sensitive adhesive (PSA)... view more

HYNOWA™ HV-1100 by Hynowa Hydrocarbon Resin is a water white hydrogenated DCPD hydrocarbon resin. It acts as a tackifier. It is suitable for EVA, SIS, SEBS block copolymers, metallocene polyolefins... view more

HYNOWA™ HV-1200 by Hynowa Hydrocarbon Resin is a water white hydrogenated DCPD hydrocarbon resin. It acts as a tackifier. It is suitable for EVA, SIS, SEBS block copolymers, metallocene polyolefins... view more

HYNOWA™ HV-1300 by Hynowa Hydrocarbon Resin is a water-white hydrogenated DCPD hydrocarbon resin. It acts as a tackifier. It is suitable for EVA, SIS, SEBS block copolymers, metallocene polyolefins... view more

OleoRez RT 20 by Industrial Oleochemical Products is a tall oil rosin stabilized triethylene glycol. Acts as a tackifier. It is a viscous liquid which offers excellent tack, adhesion and polarity to... view more

KANATOL -DPGB 50 is a mixture of di-propylene glycol di-benzoate and di-ethylene glycol di-benzoate by KLJ Group. It is a primary high solvating plasticizer for PVC & polyvinyl acetate adhesives. It... view more

SYLVALITE™ RE 100L by KRATON is is a stabilized pentaerthritol ester of tall oil rosin. It exhibits low color and good color stability. It provides good specific adhesion to variety substrates, low... view more

SYLVALITE™ RE 104 by KRATON acts as a tackifier. It is a very light color and stable pentaerythritol rosin ester. It is compatible with most commonly used EVAs, paraffins, waxes, natural rubber, SIS... view more

SYLVALITE™ RE 105L by KRATON acts as a tackifier. It is a light color pentaerythritol ester of rosin with high softening point. It provides outstanding improved shear strength, heat and aging... view more

SYLVALITE™ RE 105XL by KRATON is a very light colored and stable rosin ester based tackifier with moderately high softening point. It provides good specific adhesion and broad compatibility... view more

SYLVALITE™ RE 110L by KRATON is a light-colored, high softening point pentaerythritol ester of tall oil resin. It provides excellent color-, heat- and aging stability. It offers good specific... view more

K-FLEX® 500S by LANXESS (previously Emerald Kalama Chemical) is a glycol dibenzoate ester. It acts as a plasticizer. It is used in adhesives for the packaging industry for carton sealing, forming... view more

K-FLEX® 800 by LANXESS (previously Emerald Kalama Chemical) is glycol dibenzoate ester. It acts as a plasticizer. It is used in latex adhesives and caulks, hot melt adhesives, in the packaging... view more

Pinerez® 3090 E is a non-crystallizing rosin acid resin by Lawter. It acts as a tackifier. It emits low VOC. It is recommended for water-based flooring adhesives. It offers excellent viscosity... view more

Phenolic antioxidant that provides good compatibility with resins and excellent extraction resistance. Can be used with hot-melt adhesives. High compatibility with a wide range of organic... view more

AGITAN® A201 by Munzing is a universal defoamer for aqueous systems. It is a blend of special wax and mineral oil. It is suitable for PSA-, laminating-, packaging-, construction- and envelope... view more

AGITAN® A202E by Munzing is a defoamer for aqueous systems. It is a blend of special wax and mineral oil. It is available in opaque off-white-colored liquid form. It is used in PSA-, laminating... view more

Blend of special wax and hydrophobic silica. Used as defoamer in PSA adhesives, laminating adhesives, packaging adhesives, envelope / Label adhesives, construction adhesives and acrylic / EVA / VA ... view more

DEE FO® 2020E/50 by Munzing is a highly persistent and cost effective oil-based defoamer specially designed for use in most emulsion polymers including EVA, VA, and acrylic formulations. Povides... view more

Special wax. Used as a defoamer in most adhesive applications including PSA, laminating, packaging, envelope, wood glue, construction and natural/neoprene formulations... view more

NEVCHEM® 130 by Neville Chemical is a low-VOC, low molecular weight, C9 hydrocarbon tackifier. It is produced by catalytic polymerization of mixed aromatic and alicyclic monomers derived from... view more

NEVCHEM® 200 by Neville Chemical is a low-VOC, low molecular weight, hydrocarbon resin-based tackifier. It is produced by catalytic polymerization of mixed aromatic and alicyclic monomers derived... view more

NEVEX® 1069 by Neville Chemical is a low-VOC, low molecular weight, aromatic hydrocarbon resin-based tackifier. It is produced by catalytic polymerization of mixed aromatic monomers derived from... view more

NEVPENE® 9510 by Neville Chemical is a low-VOC, low molecular weight, C5 modified C9 hydrocarbon resin-based tackifier. It is produced by catalytic polymerization of aromatic and aliphatic monomers... view more

NEVPENE® 9511 by Neville Chemical is a low-VOC, low molecular weight, C5 modified C9 hydrocarbon resin-based tackifier. It is produced by catalytic polymerization of aromatic and aliphatic monomers... view more

POLARIS II by Pinopine is a triethylene glycol ester of gum rosin. It is used as a tackifier. It is a light-yellow viscous liquid with excellent tack. It shows good compatibility with natural &... view more

POLARIS III by Pinopine is a triethylene glycol ester of gum rosin. It is used as a tackifier. It shows good compatibility with natural & synthetic rubber, EVA polymer, wax and aliphatic hydrocarbon... view more

POLARIS IV by Pinopine is a very low VOC and SVOC triethylene glycol ester of gum rosin. It shows good compatibility with natural & synthetic rubber, EVA polymer, wax and aliphatic hydrocarbon... view more

POLARIS V by Pinopine is a triethylene glycol ester of gum rosin. It is used as a tackifier. It shows good compatibility with natural & synthetic rubber, EVA polymer, wax and aliphatic hydrocarbon... view more

POLARIS VII by Pinopine is low VOC triethylene glycol ester of gum rosin without oxidative drying fatty acid. It is used as a tackifier. It provides low viscosity. POLARIS VII is recommended for... view more

Coumarone indene resin. Used as a tackifyer in hotmelt, pressure sensitive and solvent-based adhesives. Improves adhesion and application ratea and heat, shear, water and chemical resistance... view more

Coumarone indene resin. Used as a tackifyer in hotmelt, pressure sensitive and solvent-based adhesives. Improves adhesion and application rate and heat, shear, water and chemical resistance... view more

Coumarone indene resin. Used as a tackifyer in hotmelt, pressure sensitive and solvent-based adhesives. Improves adhesion and application rate and heat, shear, water and chemical resistance... view more

Coumarone indene resin. Used as a tackifyer in hotmelt, pressure sensitive and solvent-based adhesives. Improves adhesion and application rate and heat, shear, water and chemical resistance... view more

Aromatic hydrocarbon resin. Used as a tackifier in water-borne adhesives. Provides heat, water and chemicals resistance. Increases shear, peel strength and bond development... view more

Wingtack® 102 by Cray Valley (Total Group) acts as a tackifier. It is a higher softening point, aliphatic C-5 hydrocarbon resin with a lower molecular weight distribution. Possesses exceptionally... view more

LH100-1 by Rosin Chemical(Wuping) is a hydrogenated C5 aliphatic resin. It acts as a tackifier. Hydrogenation decreases the color of C5 resin and improves stability toward heat, oxygen and... view more

LH110-1 by Rosin Chemical(Wuping) is a hydrogenated C5 aliphatic resin. It acts as a tackifier. The excellent thermal stability and aliphatic chemical properties make it useful in SIS-based hot-melt... view more

ELAZTOBOND™ MeltPlus T8-7920 by SI Group is a bio-renewable-based tackifier. It offers enhanced adhesion performance in both pressure sensitive and conventional ethylene vinyl acetate (EVA)... view more

Eastotac™ C-100XF by Synthomer is a tackifier resin. It offers low initial color, low odor, and excellent thermal stability. This grade provides excellent heat stability and consistent quality. It... view more

Eastotac™ C-115L Resin by Synthomer is a hydrogenated aliphatic tackifier resin. Used in asphalt modification, assembly, automotive, bookbinding, building and construction, caulks and sealants... view more

Hydrocarbon resin. Used in alluminum-pigment preparations, assembly, automotive, building and construction, caulks and sealants, hot melt adhesives, laminating, nonwovens, pressure sensitive... view more

Kristalex™ 3105SD by Synthomer is a water-white, highly color stable, low molecular weight hydrocarbon resin with low organic volatile content. It is made from pure aromatic monomers. It offers good... view more

Kristalex™ 3115LV is a water clear, highly color stable thermoplastic hydrocarbon resin by Synthomer. It is non-polar, low molecular weight resin with low organic volatile content. It can be used in... view more

ACTICIDE® IMS by Thor is a mixture of 3-iodo-2-propynyl butylcarbamate (2.50%) and 2–methyl–4–isothiazolin–3–one (5%). Acts as a microbiocide. It controls the growth of bacteria and fungi in wet... view more

Suntack U-101 Resin is a low-cost, non-reactive aromatic C9 petroleum resin by United Performance Materials. It acts as a tackifier. Suntack U-101 Resin is recommended for hot-melt pressure... view more

Suntack U-120 Resin is an aromatic C9 petroleum resin by United Performance Materials. It acts as a tackifier. Suntack U-120 Resin is recommended for hot-melt pressure sensitive adhesives and floor... view more

YS Polyster G125 by Yasuhara Chemical is a renewable, terpene phenolic resin. Acts as a tackifier. Provides outstanding tackiness, adhesive performance, improved heat resistance and cohesive properties. Enhances... view more

YS Polyster G150 by Yasuhara Chemical is a renewable, terpene phenolic resin. Acts as a tackifier. Provides outstanding tackiness, adhesive performance, improved heat resistance and cohesive properties. Enhances... view more

YS Polyster K125 by Yasuhara Chemical is a renewable, terpene phenolic resin. Acts as a tackifier. Provides outstanding tackiness, adhesive performance, improved heat resistance and cohesive properties. Enhances... view more

YS Polyster T160 by Yasuhara Chemical is a renewable, terpene phenolic resin with high softening point and high glass transition temperature. Acts as a tackifier. Provides outstanding tackiness, adhesive... view more

YS Polyster TH130 by Yasuhara Chemical is a renewable, terpene phenolic resin. Acts as a tackifier. Provides outstanding tackiness, adhesive performance, improved heat resistance and cohesive properties. Enhances... view more