Priacid™ A95 by Cargill is a bio-based azelaic acid with low melting point and 100% renewable carbon content. It provides reduced moisture uptake, good hydrolytic stability and improved flexibility... view more

Actmix® ADC-75P is an azodicarbonamide. It is a nitrogenous organic foaming agent. It has a relatively high foaming temperature (200-210?), which can be effectively reduced by addition of small... view more

Curekind® TMQ(RD) 1st grade by Ningbo Actmix Rubber Chemicals is a 2,2,4-Trimethyl-1,2-dihydroquinoline polymer. Acts as an amine antioxidant. Possesses excellent anti-heat oxide property. It can be combined with other antioxidant which... view more

Curekind® TMQ(RD) High grade by Ningbo Actmix Rubber Chemicals is a 2,2,4-trimethyl-1,2-dihydroquinoline polymer. Acts as an amine antioxidant. Possesses excellent anti-heat oxide property. It can be combined with other antioxidant which... view more

Hydrophilic thermoplastic hydrocarbon tackifing resin. Designed for use in rubber goods, especially those loaded with non-black fillers. Used as a thixotropic resinous tackifier, plasticizer and... view more

Low cost, aliphatic hydrocarbon tackifing resin. Designed as an economical alternative to conventional aromatic resins. Can be used in a variety of rubber compounding applications. Builds tack... view more

Resorcinol-formaldehyde novolac resin. Used as an adhesion promoter. Permits to bond rubber to rubber, fabric or steel cord. Can be used in polychloroprene (CR) fabric adhesion. Provides adhesion in... view more

Heat reactive, alkyl phenolic resin. Used in neoprene AF based contact adhesives. Imparts low initial viscosity and very good viscosity-stability. Possesses good heat resistance... view more

Pentaerythritol ester of rosin. Provides superior tackifying action to synthetic and natural rubber applications for adhesives and hot melts. Highly compatible with the more non-polar elastomers... view more

Ester Gum 105 by Arakawa Chemical is rosin ester. It is used as a tackifier in hot melt adhesives. It offers good weather resistance... view more

Rosin ester. Used as a tackifier in hot melt adhesives. Offers good compatibility with EVA... view more

Rosin ester. Used as a tackifier in hot melt adhesives. Offers good compatibility with EVA and natural and synthetic rubber... view more

Rosin ester. Used as a tackifier in hot melt adhesives. Offers good compatibility with EVA and natural and synthetic rubber... view more

Rosin ester. Used as a tackifier in hot melt and pressure sensitive adhesives. Offers good compatibility with EVA and natural and synthetic rubber... view more

Irganox® PS 800 by BASF acts as a heat stabilizer and phenolic antioxidant. It is dialkyl ester of thiodipropionic acid used in adhesives for polyethylene power cables, XLPE power cables, HDPE pipe... view more

Irganox® PS 800 FL by BASF is didodecyl 3,3'-thiodipropionate. It is a heat stabilizer in combination with a phenolic antioxidant. Used for polyethylene- & XLPE power cables, HDPE pipe and... view more

Irganox® PS 802 by BASF is a phenolic antioxidant that extends the long-term thermal stability (LTTS). It is based on dioctadecyl 3,3'-thiodipropionate. Provides general purpose heat stabilization... view more

Neol® Neopentylglycol by BASF is a primary, bifunctional alcohol with a quaternary structure. Used in adhesives... view more

RHEOBYK® -7650 by BYK is a solid, non-dusting, biocide-, VOC-, APEO-, and tin-free associative thickener (HEUR) for aqueous systems. It is suitable for use in highly polar and aqueous binder... view more

RHEOBYK® -7670 by BYK is a solid, non-dusting, biocide-, VOC-, APEO-, and tin-free associative thickener (HEUR) for use in aqueous systems. It is suitable for use in highly polar and aqueous... view more

RHEOBYK® -7690 by BYK is a solid, non-dusting, biocide-, VOC-, APEO-, and tin-free associative thickener (HEUR) for aqueous systems. It offers greater flexibility for formulation and production... view more

RIC-SYN WAX by BYK is a flaked castor oil derivative wax. Recommended for use in hot melt adhesives... view more

GP® 5833 by Bakelite Synthetics is a solid novolac resin with low ionic impurities. Used as as curing agent for epoxy resins. Produces thermoset systems. GP® 5833 provides resistance to chemicals... view more

GP® 834D54 by Bakelite Synthetics is a benzoxazine resin. Used as as curing agent for epoxy resins. Produces thermoset systems. GP® 834D54 provides resistance to chemicals and heat and a good... view more

Bentonite 331 by Brenntag Specialties (EMEA) is bentonite. Bentonite 331 is used as a rheology modifier in tape joint compounds... view more

Bentonite 333 by Brenntag Specialties (EMEA) is bentonite. Bentonite 333 is used as a rheology modifier in tape joint compounds... view more

Bentonite 351 by Brenntag Specialties (EMEA) is bentonite. Bentonite 351 is used as a rheology modifier in tape joint compounds... view more

1,2,3,6-Tetrahydrophthalic Anhydride by Changzhou Moltec Materials is an acid anhydride. It is suitable for adhesive formulations. It is available in the form of white flakes. 1,2,3,6-Tetrahydrophthalic Anhydride is soluble in general solvents and is slightly soluble... view more

Viton® A-100 by Chemours is an ultra low-viscosity, gum fluoroelastomer polymer. It demonstrates improved processing and rheology. It may be blended with other Viton™ types to enhance mold flow and... view more

Viton™ A-275C by Chemours is a dipolymer of hexafluoropropylene & vinylidene fluoride and cure chemicals. Viton™ A-275C forms a strong bond that can flex without failure after repeated temperature... view more

Viton™ A-361C by Chemours is dipolymer of hexafluoropropylene and vinylidene fluoride plus cure chemicals and metal adhesion promoter. It is designed for the injection and transfer molding of parts... view more

Viton™ A-601C by Chemours is dipolymer of hexafluoropropylene, vinylidene fluoride plus cure chemicals. This dipolymer is designed for compression molding of sealing devices. In addition to the... view more

Viton™ B-135C by Chemours is a terpolymer of hexafluoropropylene, vinylidene fluoride & tetrafluoroethylene and cure chemicals. It contains a cure system, bonding promoter and process aid package... view more

Oxidized polyethylene wax. Used as a modifier for hot melt adhesives. Has high viscosity. Provides antisticking of the melt and acceleration of gelation without clouding... view more

Licowax® PED 192 flakes by Clariant is oxidized polyethylene wax. It is used for modification of hot melt adhesives. It possesses high viscosity and accelerates gelation as well as acts externally... view more

Polyglykol® 10000 S by Clariant is a polyethylene glycol. Acts as a solvent and plasticizer. Shows typical chemical reactions of alcohols/diols and a very low evaporation rate. Polyglykol® 10000 S... view more

Polyglykol® 12000 S by Clariant is a polethylene glycol. Acts as a solvent and plasticizer. Shows typical chemical reactions of alcohols/diols and a very low evaporation rate. Polyglykol® 12000 S is... view more

Polyglykol® 1500 S by Clariant is a polyethylene glycol. Acts as a solvent and plasticizer. Shows typical chemical reactions of alcohols/diols and a very low evaporation rate. Polyglykol® 1500 S is... view more

DESMODUR® 44 M FLAKES by Covestro is a monomeric diphenylmethane-4,4'-diisocyanate (MDI). It is solvent-free, colorless to pale yellow flakes that melt at temperatures above 38.4 °C. Recommended... view more

DESMODUR® 44 MC FLAKES by Covestro is a monomeric diphenylmethane-4,4'-diisocyanate (MDI). It is solvent-free, colorless to pale yellow solid that melts at temperatures above 38.4 °C. It is suitable... view more

MONDUR® M Flaked by Covestro is a high purity grade, monomeric diphenylmethane 4,4 ’-diisocyanate (MDI). Can be used in the production of adhesives. The storage life of MONDUR M Flaked is about 3 months... view more

MONDUR® MB by Covestro is an aromatic monomeric MDI. It is a raw material used for the synthesis of reactive polyurethanes and prepolymers in order to formulate two-component- or one-component... view more

SMA® 3000 by Cray Valley (Total Energies) is a styrene maleic anhydride copolymer. It is a copolymer of medium molecular weight with a mole ratio of roughly 3:1. It can be used to alter melt flow... view more

Synperonic™ PE/F127 FLAKES by Croda is ethoxylated polypropylene oxide-based dispersant for superior colloidal stability. It acts as a polymeric o/w emulsifier for polyester and epoxy resins... view more

Synperonic™ PE/F87 by Croda is a non-migratory, non-ionic di-hydroxyfunctional block copolymer surfactant. It is used as a post-stabilizer for pigment and polymer dispersions. It provides improved... view more

CRYSTAZENE 110 by DRT is water-white, odorless, highly stabilized terpene modified tackifying resin. It exhibits outstanding thermal stability. It is compatible with ethylene/vinyl acetate... view more

Rubber Antioxidant TMQ (RD) (Flake) by Dalian Richon Chem is a 2, 2, 4-trimethyl-1, 2-dihydroquinoline polymer. It acts as an antioxidant. Rubber Antioxidant TMQ (RD) (Flake) is recommended for... view more

Nonpolar polyethylenewax. Used as an additive for hotmelt adhesives... view more

Nonpolar polyethylenewax. Used as an additive for hotmelt adhesives... view more

Chlorez® 700-DF by Dover Chemical (ICC Industries) is a non-toxic, chlorinated paraffin resin. It is used as flame retardant in adhesives. It increases adhesion and provides hardness. Resists water, acid, alkali and... view more

Distearyl pentaerythritol diphosphite. Used as secondary antioxidant in adhesives... view more

Distearyl pentaerythritol diphosphite. Used as secondary antioxidant in adhesives... view more