Priplast™ 3172 by Cargill is a semi-crystalline polyester polyol building block. It is a vegetable-oil based and exhibits low color, excellent stability, strength and enhanced durability. It affords... view more

Priplast™ 3192 by Cargill is a semi-crystalline polyester polyol. It is an all-round building block for polyurethane and polyurethane dispersions. It offers good adhesion to a wide range of flexible... view more

Priplast™ 3294 by Cargill is a semi-crystalline, bio-based polyester polyol. It offers excellent water resistance, superior surface hardness and outstanding mechanical properties. Exhibits good... view more

Benzoflex™ 352 plasticizer by Eastman is a white flake solid plasticizer. Designed for hot-melt adhesives and sealants. All components of Benzoflex™ 352 plasticizer are listed in TSCA, DSL, CEPA... view more

Behenyl Acrylate 1822 (BEA 1822) by BASF is a mixture of C18, C20 and C22 acrylates. It is a monofunctional monomer with a long hydrophobic side chain pendant group. It imparts flexibility, impact... view more

Behenyl Acrylate 1822 F (BEA 1822 F) by BASF is behenyl acrylate (acrylic acid ester). It provides low shrinkage, hydrophobicity and weatherability to polymers. Forms homopolymers and copolymers... view more

Behenyl Methacrylate 1822 F (BEMA 1822 F) by BASF is a mixture of C18, C20 and C22 methacrylates. It is a low volatility, monofunctional monomer with a long, hydrophobic side chain. Forms... view more

Stearyl Acrylate 1618 NA (SA 1618 NA) by BASF is a monofunctional monomer with long hydrophobic side chain. Imparts flexibility, impact strength, hydrophobicity, low shrinkage, chemical resistance... view more

acResin® ZeroPCF A 204 UV by BASF is an UV cross-linkable, biocides-, MOSH-, MOAH- & solvent-free, high-performance acrylic hot-melt polymer. Exhibits very good shear-, good- tack & peel properties, excellent... view more

BLACK PEARLS® 570 by Cabot is a specialty carbon black. It exhibits good coloration and covering power. It provides higher levels of jetness in comparison to Cabot’s BLACK PEARLS® 430 and BLACK... view more

Corona™ 9 by Croda is skin-friendly, water in oil emulsion stabilizer that reduced tackiness. It is a scratch-resistant and anti-blocking additive. It prevents scarring on the surface, especially at... view more

Maxemul™ 5010 by Croda is a non-ionic, co-polymerizable surfactant for use as a stabilizer in latex binders typically used in pressure-sensitive adhesives. It is reactive towards vinylic unsaturated... view more

Zephrym™ PD 2246 by Croda is a polymeric dispersant. It offers enhanced dispersion viscosity and extended storage capability. It is recommended for both organic and inorganic pigments including... view more

Finntalc M15 by Elementis is floated, medium sized, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M30 by Elementis is floated, coarse, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M40 by Elementis is floated, coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. It is recommended for adhesives and polyester putties... view more

Finntalc M50 by Elementis is floated, very coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. Finntalc M50 is recommended for adhesives and polyester putties... view more

Finntalc M65 by Elementis is talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Jeffamine® M-2095 Amine by Huntsman is polyethylene glycol (PEG)-based polyetheramine. It is a hydrophilic polyether monoamine of approximately 2000 molecular weight. Exhibits moderate viscosity... view more

Jeffamine® M-3085 Amine by Huntsman is a hydrophilic polyether monoamine of approximately 3000 molecular weight with a PO/EO mole ratio of about 8/58. Exhibits moderate viscosity and low vapor... view more

Omnicat 270 by IGM Resins is a heavymetal-free, high-molecular-weight, sulfonium salt-based photo initiator. It is recommended for the cationic polymerization of formulations based on epoxies or... view more

Omnirad 4MBZ Flakes by IGM Resins is an effective Type II photoinitiator. Used in combination with tertiary amine synergists to initiate radical polymerization of unsaturated oligomers such as acrylates after... view more

Omnirad EDB by IGM Resins is a highly efficient tertiary amine synergist. It is used in conjunction with type II photoinitiator. It generates free radicals that initiate radical polymerization of... view more

Omnirad TPO by IGM Resins is a highly efficient, low yellowing, free-radical type 1 photoinitiator. Used to initiate radical polymerization of unsaturated oligomers like acrylates, after exposure to... view more

KRATON™ G1650 ES by KRATON is a linear triblock copolymer based on styrene and ethylene/butylene with bound styrene of 29.2% mass. It is supplied as fluffy crumb dusted with amorphous silica... view more

KRATON™ G1650 EU by KRATON is a linear triblock copolymer based on styrene and ethylene/butylene with bound styrene of 29.2%. It is supplied as undusted fluffy crumb. KRATON™ G1650 EU is used in... view more

Kraton™ G1651 E by KRATON is a clear, linear triblock SEBS copolymer with bound styrene of 31.5% mass and contains antioxidant. It offers improved resistance to ageing and degradation at elevated... view more

KRATON™ G1654 ES by KRATON is a clear, linear triblock copolymer based on styrene and ethylene/butylene with bound styrene of 30% mass. It is available as fluffy crumb dusted with amorphous silica... view more

Polymeg 2000 Polyol by LyondellBasell is a linear diols with a backbone of repeating tetramethylene units connected by ether linkages. The chain is capped with primary hydroxyl units. At slightly... view more

Polymeg 2000 Polyol by LyondellBasell is polytetramethylene ether glycols (PTMEG) produced by polymerizing tetrahydrofuran. The chain is capped with primary hydroxyl units. At slightly elevated... view more

D.E.R.™ 337 by Olin is an intermediate epoxy equivalent weight semi-solid epoxy resin. It can also be used as a modifier for other epoxy resins to improve impact strength, extensibility and... view more

Polyethylene glycol 1000. Acts as a humectant, plasticizer, lubricant and antistatic agent. It is a hygroscopic polymer highly soluble in water due to the hydrophilic characteristic provided by the... view more

Polyethylene glycol 1500. Acts as a humectant, plasticizer, lubricant and antistatic agent. It is a hygroscopic polymer highly soluble in water due to the hydrophilic characteristic provided by the... view more

SR368 by Sartomer (Arkema Group) is tris (2-hydroxy ethyl) isocyanurate triacrylate grade. Offers fast cure response and low shrinkage. Provides good adhesion, weatherability, high impact strength... view more

EMULDAC AS-11 by Sasol is a non-ionic surfactant. It is a fatty alcohol polyethylene glycol ether based on NAFOL 1618S and ethylene oxide (about 11 moles). It is designed for adhesive applications... view more

EMULDAC AS-18 by Sasol is a non-ionic surfactant. It is a fatty alcohol polyethylene glycol ether. It is based on NAFOL 1618S and ethylene oxide (about 15 moles). It is used in adhesives... view more

EMULDAC AS-20 by Sasol is a fatty alcohol polyethyleneglycol ether-based non-ionic surfactant. It is based on NAFOL 1618S and ethylene oxide (about 18 moles). It is suitable for adhesives... view more

EMULDAC AS-22 by Sasol is a non-ionic surfactant. It is a fatty alcohol polyethylene glycol ether. It is based on NAFOL 1618S and ethylene oxide (about 21 moles). It finds applications in adhesives... view more

EMULDAC AS-3.5 by Sasol is a non-ionic surfactant. It is a fatty alcohol polyethylene glycol ether. It is based on NAFOL 1618S and ethylene oxide (about 3.5 moles). It finds applications in... view more

Aliphatic polyester polyol. It has crystalline nature designed to impart an excellent bonding profile. It contains exclusively primary hydroxyl groups. It allows adhesives to have a higher initial... view more

Aliphatic polyester polyol. It is designed to have excellent adhesion to a wide variety of substrates. Complies with AICS, DSL, IECSC, ENCS, ECL, PICCS, TSCA and New Zealand... view more

Stepanpol® PC-205P-160 by Stepan Company is aliphatic polyester polyol. It can be used in polyurethane adhesives. This crystalline grade offers good bonding to variety of substrates. Stepanpol®... view more

Stepanpol® PC-205P-20 by Stepan Company is a prepolymer grade aliphatic polyester polyol of crystalline nature designed to impart an excellent bonding profile. Stepanpol® PC-205P-20 is designed for... view more

Stepanpol® PC-205P-30 by Stepan Company is a prepolymer grade aliphatic polyester polyol of crystalline nature designed to impart an excellent bonding profile. Stepanpol® PC-205P-30 is recommended... view more

Kristalex™ 5140SD by Synthomer is a high softening point, low molecular weight hydrocarbon resin with low organic volatile content and low odor. It is made up of pure aromatic monomers. It is... view more

Piccotac™ 9095-E is a modified low molecular weight aliphatic hydrocarbon resin by Synthomer. Acts as tackifier and provides excellent adhesion to SIS block copolymers. Possesses excellent peel and... view more

Norbornene by Topas Advanced Polymers (Polyplastics) is bicyclo-[2.2.1] heptane (Synonyms: 2-Norbornylene, 2-Norbornene and Norcamphene). It is made by the Diels-Alder reaction of cyclopentadiene... view more

VINNAPAS® eco by Wacker is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. Imparts good adhesion to various plastic surfaces and high cohesion... view more

VINNAPAS® eco by Wacker is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. Imparts good adhesion to various plastic surfaces and high cohesion... view more

VINNAPAS® eco by Wacker is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. Imparts good adhesion to various plastic surfaces and high cohesion... view more

VINNAPAS® eco by Wacker is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. Imparts good adhesion to various plastic surfaces and high cohesion... view more